USED HAAS TM1P – 2019
The HAAS TM1P – 2019 is a CNC toolroom vertical machining center designed for job shops, prototype manufacturing, tooling, maintenance, education, and small-batch production. The TM1P combines the accessibility of a toolroom mill with a full Haas CNC control and a 10-pocket automatic tool changer, making it more suitable for repetitive machining than the standard TM1.
The TM1P provides 30 inches of X-axis travel, 16 inches of Y-axis travel, and 16 inches of Z-axis travel. It uses a 40-taper, 7.5 HP, 6,000 RPM direct-speed belt-drive spindle with approximately 33 ft-lb of torque at 1,200 RPM. Haas specifies rapid traverses and maximum cutting feedrates of approximately 400 IPM on all three axes.
Its compact footprint, long X-axis travel, automatic tool changer, conversational programming, and Haas CNC control make the TM1P a practical machine for manufacturers that need a versatile CNC mill without the footprint or cost of a larger VMC.
HAAS TM1P – 2019 – AXIS
| Specification | Details |
|---|---|
| Machine Type | CNC Toolroom Vertical Machining Center |
| Axis Configuration | 3-Axis |
| X-Axis Travel | 30″ / 762 mm |
| Y-Axis Travel | 16″ / 406 mm |
| Z-Axis Travel | 16″ / 406 mm |
| CNC Interpolation | 3-Axis |
| 4th-Axis Capability | Optional |
| Rotary Integration | Available |
| Rigid Tapping | Available |
| Spindle Orientation | Available |
HAAS TM1P – 2019 – AXIS TRAVELS / WORK ENVELOPE
| Specification | Details |
|---|---|
| X-Axis Travel | 30″ / 762 mm |
| Y-Axis Travel | 16″ / 406 mm |
| Z-Axis Travel | 16″ / 406 mm |
| Spindle Nose to Table Maximum | 20″ / 508 mm |
| Spindle Nose to Table Minimum | 4″ / 102 mm |
| Work Envelope | 30″ x 16″ x 16″ |
| Table Length | 47.8″ / 1,213 mm |
| Table Width | 10.5″ / 267 mm |
| Maximum Table Load | 350 lbs / 159 kg |
The 30-inch X-axis travel gives the TM1P useful capacity for a toolroom-class machine while maintaining a compact overall footprint.
HAAS TM1P – 2019 – CAPACITY / TABLE
| Specification | Details |
|---|---|
| Table Length | 47.8″ / 1,213 mm |
| Table Width | 10.5″ / 267 mm |
| T-Slot Width | 0.626–0.630″ / 15.9–16.0 mm |
| T-Slot Center Distance | 4″ / 102 mm |
| Number of Standard T-Slots | 3 |
| Maximum Table Load | 350 lbs / 159 kg |
| Workholding | Vise / Fixture / Rotary |
| 4th-Axis Integration | Optional |
| Table Type | Fixed T-Slot |
HAAS TM1P – 2019 – SPINDLE
| Specification | Details |
|---|---|
| Spindle Type | Direct-Speed Belt Drive |
| Spindle Taper | CT or BT40 |
| Maximum Spindle Speed | 6,000 RPM |
| Spindle Motor | 7.5 HP / 5.6 kW |
| Maximum Torque | 33 ft-lb @ 1,200 RPM |
| Drive System | Direct-Speed Belt Drive |
| Bearing Lubrication | Grease Packed |
| Spindle Cooling | Air Cooled |
| Spindle Orientation | Available |
| Tool Retention | Automatic |
The 7.5 HP, 6,000 RPM, 40-taper spindle provides a useful combination of speed and power for general-purpose machining.
HAAS TM1P – 2019 – TOOL CHANGER
| Specification | Details |
|---|---|
| Tool Changer Type | Carousel |
| Tool Capacity | 10 Stations |
| Tool Taper | CT or BT40 |
| Maximum Tool Diameter | 3.5″ / 89 mm |
| Maximum Tool Weight | 12 lbs / 5.4 kg |
| Tool-to-Tool Time | Approx. 5.7 sec |
| Chip-to-Chip Time | Approx. 6.5 sec |
| Automatic Tool Change | Yes |
| Tool Management | CNC Controlled |
The 10-station automatic tool changer allows the TM1P to perform multiple operations without requiring the operator to manually change tools between cycles.
HAAS TM1P – 2019 – CONTROL SYSTEM
| Specification | Details |
|---|---|
| CNC Control | Haas CNC Control |
| Programming | G-Code / Conversational |
| Conversational Programming | Yes |
| Visual Part Programming | Available |
| Advanced Tool Management | Available |
| HaasConnect | Available |
| Ethernet Interface | Available |
| Wi-Fi Connection | Available |
| HaasDrop | Available |
| User-Definable Macros | Available |
| Program Memory | 1 GB |
The Haas control provides both conventional G-code programming and conversational programming. The TM-P platform also supports modern connectivity and programming features such as HaasConnect, Ethernet, Wi-Fi, HaasDrop, Visual Part Programming, and Advanced Tool Management.
HAAS TM1P – 2019 – FEEDRATES
| Specification | Details |
|---|---|
| X-Axis Rapid Traverse | 400 IPM / 10.2 m/min |
| Y-Axis Rapid Traverse | 400 IPM / 10.2 m/min |
| Z-Axis Rapid Traverse | 400 IPM / 10.2 m/min |
| Maximum Cutting Feedrate | 400 IPM / 10.2 m/min |
| X-Axis Maximum Thrust | 2,000 lbf / 8,896 N |
| Y-Axis Maximum Thrust | 2,000 lbf / 8,896 N |
| Z-Axis Maximum Thrust | 2,000 lbf / 8,896 N |
| Feedrate Override | Standard |
| Linear Interpolation | Yes |
| Circular Interpolation | Yes |
Haas specifies 400 IPM rapid traverse rates and maximum cutting feedrates for X, Y, and Z.
HAAS TM1P – 2019 – COOLANT & CHIP MANAGEMENT
| Specification | Details |
|---|---|
| Flood Coolant | Available |
| Coolant Pump Kit | Standard |
| Coolant System | Flood |
| Coolant Capacity | Approx. 20 gal / 76 L |
| Programmable Coolant | Available |
| Chip Auger | Optional / Configuration Dependent |
| Chip Conveyor | Optional / Configuration Dependent |
| Air Blast | Available |
| Through-Spindle Coolant | Optional |
| Mist Collector | Optional |
Haas lists a 20-gallon flood coolant system with the TM1P standard configuration. Optional equipment can vary on an individual 2019 machine.
HAAS TM1P – 2019 – AUTOMATION / PROBING
| Specification | Details |
|---|---|
| Automatic Tool Changer | Standard |
| Tool Capacity | 10 |
| Work Probe | Optional |
| Tool Probe | Optional |
| Wireless Probing | Available |
| 4th-Axis Drive | Optional |
| 4th-Axis Wiring | Optional |
| Rigid Tapping | Available |
| Conversational Programming | Standard |
| Rotary Table Integration | Available |
HAAS TM1P – 2019 – POWER REQUIREMENTS
| Specification | Details |
|---|---|
| Spindle Motor | 7.5 HP / 5.6 kW |
| Single-Phase Input | 220 VAC |
| Single-Phase Full Load | 40 A |
| Three-Phase Low Voltage | 220 VAC |
| Three-Phase Low Voltage Full Load | 25 A |
| Three-Phase High Voltage | 440 VAC |
| Three-Phase High Voltage Full Load | 13 A |
| Electrical Service | Single- or Three-Phase |
| Shop Air | Required |
| Air Requirement | 4 SCFM @ 100 PSI |
| Minimum Air Pressure | 80 PSI |
Haas specifies 220 VAC single-phase or 220/440 VAC three-phase electrical configurations, depending on configuration.
HAAS TM1P – 2019 – DIMENSIONS
| Specification | Details |
|---|---|
| Shipping Length | 112″ / 284 cm |
| Shipping Width | 80″ / 203 cm |
| Shipping Height | 100″ / 254 cm |
| Shipping Weight | Approx. 4,440 lbs / 2,014 kg |
| Floor Space | Compact Toolroom Configuration |
| Installation | Industrial |
| Rigging | Required |
The published TM1P specifications list approximately 112 x 80 x 100 inches shipping dimensions and approximately 4,440 pounds shipping weight.
HAAS TM1P – 2019 – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | Haas |
| Model | TM1P |
| Year | 2019 |
| Machine Category | Vertical Machining Center |
| Machine Type | CNC Toolroom Mill |
| Axis Configuration | 3-Axis |
| X-Axis Travel | 30″ |
| Y-Axis Travel | 16″ |
| Z-Axis Travel | 16″ |
| Table Size | 47.8″ x 10.5″ |
| Maximum Table Load | 350 lbs |
| Spindle Speed | 6,000 RPM |
| Spindle Power | 7.5 HP |
| Spindle Taper | CT / BT40 |
| Tool Capacity | 10 Stations |
| Maximum Cutting Feedrate | 400 IPM |
| CNC Control | Haas CNC |
| 4th-Axis Capability | Optional |
| Coolant Capacity | Approx. 20 gal |
| Shipping Weight | Approx. 4,440 lbs |
INDUSTRIES THAT USE HAAS TM1P
The HAAS TM1P is suitable for:
- General machine shops
- Aerospace
- Automotive
- Defense
- Tool and die
- Mold manufacturing
- Prototype manufacturing
- Maintenance and repair
- Educational facilities
- Industrial machinery
- Contract manufacturing
- Precision engineering
- Small-batch production
TYPICAL PARTS HAAS TM1P CAN PRODUCE
The TM1P can produce:
- Brackets
- Mounting plates
- Fixtures
- Jigs
- Housings
- Flanges
- Tooling components
- Prototype parts
- Machine components
- Automotive components
- Aerospace components
- Industrial brackets
- Repair components
- Custom production parts
Typical machining operations include face milling, pocketing, contouring, drilling, boring, tapping, reaming, slotting, and 3-axis profiling.
WHY CHOOSE HAAS TM1P
The major advantage of the HAAS TM1P is its combination of 30 x 16 x 16-inch travels, 40-taper spindle, 10-tool ATC, and 400 IPM rapids in a relatively compact toolroom machine.
The 7.5 HP, 6,000 RPM spindle provides sufficient capability for a broad range of general machining work. The automatic tool changer also makes the machine more productive than the standard TM1, particularly when jobs require multiple tools.
The TM1P is also designed to be accessible to operators with varying levels of CNC experience. Conversational programming can simplify setups, while experienced machinists can use standard G-code programming for more complex work.
WHY BUY USED HAAS TM1P – 2019
A used 2019 HAAS TM1P can be an attractive choice for a shop that wants a relatively modern CNC toolroom mill without purchasing a new machine.
The machine offers 30-inch X-axis travel, 16-inch Y and Z travel, a 7.5 HP 6,000 RPM spindle, 10-tool ATC, 400 IPM rapids, and Haas CNC control.
Because a 2019 machine is considerably newer than many used TM-series machines, buyers may find better availability of modern control functions and less age-related wear, although actual condition depends on usage.
Before purchasing, inspect the spindle, ballscrews, linear guides, table, way covers, tool changer, drawbar, coolant system, lubrication system, and electrical cabinet.
Buyers should also request power-on hours, cutting hours, spindle hours, maintenance records, alarm history, crash history, and a test-cut demonstration.
HOW MUCH DOES A USED HAAS TM1P – 2019 COST?
The price of a used 2019 HAAS TM1P depends primarily on machine hours, spindle condition, options, tooling, probing, 4th-axis equipment, and overall maintenance.
For context, Haas published a 2023 TM1P quote at US$42,995 before options, showing that the TM1P remains a relatively substantial CNC investment even in its basic configuration.
A practical used-market estimate for a 2019 machine is:
| USED HAAS TM1P – 2019 PRICE RANGE | ESTIMATED COST |
|---|---|
| High Hours / Basic Configuration | $24,000 – $28,000 |
| Functional Used Machine | $28,000 – $32,000 |
| Good Condition / Production Ready | $32,000 – $36,000 |
| Excellent / Well Equipped | $36,000 – $40,000 |
| Very Low Hours / Premium Configuration | $40,000+ |
For a 2019 HAAS TM1P in good working condition, I would estimate approximately $30,000–$37,000 USD.
For your inventory listing, I would recommend a practical asking-price range of $33,000–$37,000 USD for a clean, operational machine.
A low-hour machine with WIPS probing, 4th-axis capability, excellent spindle condition, additional coolant equipment, and complete tooling could potentially command $37,000–$41,000+.
A high-hour machine with significant wear, missing options, or repair requirements could fall closer to $24,000–$30,000.
Best estimated listing value: $33,000–$37,000 USD.
Related Products
-
HAAS - ST40L
VIEW MACHINE -
HAAS - VF5B/40
VIEW MACHINE -
HAAS - VF0EB
VIEW MACHINE -
HAAS - TM2P
VIEW MACHINE