USED DMG MORI WASINO GG-5

The DMG MORI WASINO GG-5 is a high-precision flat-tooling CNC turning center with a dual-spindle configuration, designed for compact, high-efficiency machining of small components with strong emphasis on accuracy, accessibility, and reduced lead time. It belongs to the WASINO G-series, which is known for combining rigid machine construction with precision-oriented flat-tooling architecture.

The machine supports a maximum workpiece diameter of approximately 50 mm and a maximum workpiece length of around 40 mm, with bar capacity typically up to 45 mm, depending on configuration. It is designed for small, high-value parts such as medical components, dental screws, connectors, and precision mechanical elements.

A key feature of the GG-5 is its parallel dual-spindle structure, allowing machining operations to be performed on both front and rear faces within the same machine. This significantly reduces production lead time and eliminates the need for secondary setups. The system is designed for simultaneous or sequential machining, depending on the part process flow.

The machine uses a flat-tooling (gang tool) system, which eliminates turret indexing time and improves both rigidity and positional accuracy. This contributes to highly stable machining and excellent surface finish quality, especially in small, precise components.

The GG-5 is built with a compact footprint and high rigidity bed structure, which improves vibration damping and ensures consistent accuracy during continuous operation. Its design is optimized for space-saving production cells, making it suitable for automated manufacturing environments.

Automation compatibility is a key strength, as the GG-5 can be integrated with gantry loaders, bar feeders, and part handling systems, enabling semi or fully automated production lines for 24/7 operation.

Overall, the DMG MORI WASINO GG-5 is a compact, dual-spindle precision turning system designed for high-accuracy machining, reduced cycle time, and efficient small-part production in space-constrained, high-value manufacturing environments.

DMG MORI WASINO GG-5 SPECIFICATIONS

WHY BUY USED DMG MORI WASINO GG-5

Buying a used DMG MORI WASINO GG-5 is a strong option for manufacturers focused on high-precision small-part production with reduced cycle time and compact automation requirements. Its dual-spindle architecture and flat-tooling system make it valuable even in used condition.

The biggest advantage is parallel machining efficiency. The dual-spindle setup allows front and rear machining within one machine cycle, reducing total production time and eliminating secondary operations. Even older machines maintain strong productivity if properly maintained.

Cutting time is an important factor in valuation. These machines are typically used in continuous production environments, so wear depends on operational intensity. Machines with lower cutting time (under 15,000–20,000 hours) are generally preferred. Units under 10,000–12,000 hours are considered premium because spindle alignment, tooling accuracy, and guideway condition remain close to original standards.

Another advantage is low mechanical complexity compared to multi-axis production systems, which improves long-term reliability and reduces maintenance costs. The flat-tool system also reduces wear compared to turret-based systems.

The GG-5 is especially suitable for medical, dental, electronics, and precision engineering industries, where small parts require consistent accuracy and repeatability.

DMG MORI support and WASINO engineering heritage ensure spare parts availability, although older control systems may sometimes require modernization depending on production needs.

While not designed for heavy machining, it excels in small-part, high-precision, repeatable production with efficient cycle time reduction.

In summary, a used GG-5 offers strong value through dual-spindle productivity, compact automation capability, and high-accuracy machining performance in small-part manufacturing environments.

HOW MUCH DOES A USED DMG MORI WASINO GG-5 COST?

The cost of a used DMG MORI WASINO GG-5 depends on manufacturing year, spindle condition, automation level, control system, and cutting time.

For older machines manufactured before 2000, similar dual-spindle flat-tooling CNC lathes typically range from $25,000 to $60,000, depending on wear, retrofits, and control system condition. These machines may require electrical or CNC upgrades for modern compatibility.

Machines produced between 2000 and 2010 generally fall within the $60,000 to $120,000 range, depending on spindle health, synchronization accuracy, and maintenance quality. Machines with lower cutting time (under 15,000–20,000 hours) are priced higher due to better retained precision.

For 2010–2025-era machines or well-maintained units, prices typically range from $120,000 to $220,000+, especially if equipped with automation systems such as gantry loaders, bar feeders, chip conveyors, and upgraded CNC controls.

Cutting time plays a key role, but in this machine it reflects precision wear and spindle synchronization quality rather than just production hours. Machines with low cutting time (under 10,000–12,000 hours) are highly desirable because they maintain better alignment between spindles and tool systems.

Other important pricing factors include:

• Spindle vibration and bearing condition
• Synchronization accuracy between spindles
• Guideway wear and backlash
• Control system generation (Fanuc upgrades increase value)
• Automation integration level

Buyers should prioritize test cutting results, spindle accuracy, and mechanical condition over age alone.

Overall, the cost of a used WASINO GG-5 is determined by precision condition, automation setup, and usage history, with cutting time serving as a key indicator of long-term reliability and production stability.