USED MAZAK QUICKTURN NEXUS 300 - CNC Machine For Sale - UK - Europe - Shipping Globally

MAZAK QUICKTURN NEXUS 300

MAKE: MAZAK
TYPE: Lathe
SKU: 112180
COUNTRY: UK

USED MAZAK QUICK TURN NEXUS 300

The MAZAK QUICK TURN NEXUS 300 is a heavy-duty CNC turning center designed for production machining of medium-to-large diameter components. It combines a rigid horizontal turning platform with a powerful main spindle, large work envelope, automatic turret, and MAZATROL CNC control. Documented QTN 300 machines are available in configurations with approximately 26.77 to 29.5 inches of swing, maximum turning diameters around 16.5 inches, and machining lengths approaching 48 to 50 inches, depending on the exact machine configuration.

The QTN 300 is positioned above smaller QUICK TURN models and is intended for shops that need greater turning diameter, spindle capacity, and cutting power. Used examples have been documented with a 35 HP spindle motor, 4,000 RPM maximum spindle speed, A2-8 spindle nose, and spindle bore of approximately 3.46 inches. These characteristics give the machine the power and rigidity needed for steel, stainless steel, tool steel, aluminum, and other industrial materials.

A major advantage of the QUICK TURN NEXUS 300 is its ability to combine a relatively large turning envelope with a conventional 2-axis CNC configuration. The machine does not require the complexity of a mill-turn center when the production requirement is primarily turning, facing, boring, threading, grooving, and related operations.

The QTN 300 has been documented with a 12-station automatic turret, allowing multiple turning, boring, threading, grooving, and finishing tools to remain loaded during production. Automatic tool indexing reduces setup and operator intervention while allowing several machining operations to be completed in a single cycle.

The machine can also be equipped with a programmable tailstock, automatic tool eye, chip conveyor, coolant system, and other production accessories. A documented 2006 QTN 300 includes a programmable tailstock and quill, automatic tool eye, side-discharge chip conveyor, and MAZATROL Fusion 640T control.

The MAZATROL 640T NEXUS control is another defining feature of this generation of QUICK TURN NEXUS machines. Used QTN 300 examples have been documented with MAZATROL 640T controls, including machines with EIA/ISO capability, Ethernet, RS232 communication, and other production-oriented options.

The QUICK TURN NEXUS 300 is particularly useful for manufacturers producing shafts, bushings, flanges, housings, rollers, hydraulic components, machine components, and other rotational parts. Its combination of a large chuck, substantial spindle motor, automatic turret, and long machining capacity makes it suitable for both job-shop and repetitive production environments.

For a used CNC buyer, the QTN 300 can be an attractive alternative to smaller turning centers when additional spindle power and work envelope are required. However, because used machines are available with different chuck sizes, center distances, spindle speeds, controls, and accessories, the exact machine configuration should always be verified before purchase.


MAZAK QUICK TURN NEXUS 300 – AXIS

The standard QUICK TURN NEXUS 300 is a 2-axis CNC turning center, using X-axis movement for radial tool positioning and Z-axis movement for longitudinal movement along the workpiece.

The X axis controls cutting diameter while the Z axis controls cutting length. This configuration is well suited to standard CNC turning operations such as outside-diameter turning, facing, boring, threading, grooving, chamfering, and taper turning.

Documented QTN 300 machines show approximately 8.85 inches of X-axis travel and approximately 49 inches of Z-axis travel on the longer-bed configuration.

SpecificationDetails
Machine TypeCNC Turning Center
Axis Configuration2 Axis
Controlled AxesX / Z
X AxisRadial Tool Movement
Z AxisLongitudinal Tool Movement
Y AxisNo
C AxisNo
Main SpindleYes
Sub SpindleNo
Live ToolingNo on standard documented configuration
Automatic TurretYes
TailstockYes
Programmable TailstockConfiguration Dependent
Automatic Tool SettingConfiguration Dependent
CNC TurningYes

The 2-axis arrangement makes the QTN 300 relatively straightforward to program and operate compared with more complex multi-axis turning centers.


MAZAK QUICK TURN NEXUS 300 – AXIS TRAVELS / WORK ENVELOPE

The QTN 300 provides a substantial turning envelope for a conventional 2-axis CNC lathe. Documented machines have approximately 26.77 inches of swing and maximum cutting diameters around 16.53 inches. Some listings report approximately 29.5 inches of maximum swing depending on the specific configuration.

The longer-bed configuration provides approximately 48.23 inches of machining length, making the machine capable of handling relatively long shafts and other cylindrical components.

SpecificationDetails
Maximum SwingApproximately 26.77–29.5 inches
Maximum Turning DiameterApproximately 16.53 inches
Maximum Machining LengthApproximately 48.23 inches
X Axis TravelApproximately 8.85–10.13 inches
Z Axis TravelApproximately 48.75–49 inches
Center DistanceConfiguration Dependent
Long-Bed ConfigurationApproximately 48-inch cutting length documented
Standard Machining DiameterConfiguration Dependent
Maximum DiameterTool-clearance dependent
Maximum LengthTailstock / bed configuration dependent
Work EnvelopeConfiguration Dependent
Tailstock ClearanceConfiguration Dependent

Actual maximum cutting dimensions depend on the tooling arrangement, chuck, tailstock position, workpiece geometry, and exact machine configuration.


MAZAK QUICK TURN NEXUS 300 – CAPACITY / CHUCK

The QTN 300 is commonly found with a 10- or 12-inch chuck, depending on configuration. A documented 2005 QTN 300 is equipped with a 12-inch chuck, while other documented machines use a 10-inch hydraulic chuck.

The larger chuck options provide the workholding capacity necessary for the machine’s relatively large turning envelope.

SpecificationDetails
Chuck Type3-Jaw / Configuration Dependent
Chuck Size10 or 12 inches documented
Larger Chuck12 inches documented
Spindle NoseA2-8
Bar CapacityApproximately 3.0–3.5 inches
Spindle BoreApproximately 3.46 inches
TailstockYes
Tailstock CenterMT No. 4 or MT No. 5 documented
Programmable TailstockConfiguration Dependent
Hydraulic ChuckConfiguration Dependent
Manual ChuckAvailable on some machines
Steady RestOptional / Configuration Dependent
WorkholdingConfiguration Dependent
Parts CatcherOptional / Configuration Dependent

The approximately 3.5-inch bar capacity is particularly useful for shaft and bar-stock production, although the actual capacity depends on the spindle configuration and drawtube arrangement.


MAZAK QUICK TURN NEXUS 300 – SPINDLE

The QTN 300 uses a substantial main spindle designed for both production turning and heavy cutting. Documented machines have been equipped with a 35 HP spindle motor, while the documented spindle speed is approximately 4,000 RPM.

The combination of high spindle power and moderate maximum speed gives the machine useful torque for larger-diameter work while still providing enough speed for finishing and smaller components.

SpecificationDetails
Spindle OrientationHorizontal
Spindle TypeMain Turning Spindle
Spindle Motor35 HP documented
Spindle PowerApproximately 26.1 kW
Maximum Spindle Speed4,000 RPM documented
Spindle NoseA2-8
Spindle BoreApproximately 3.46 inches
Bar CapacityApproximately 3–3.5 inches
Spindle TorqueConfiguration Dependent
Speed RangeConfiguration Dependent
Heavy TurningYes
Steel MachiningYes
Stainless Steel MachiningYes
Aluminum MachiningYes
Tool Steel MachiningYes

Some QTN 300 listings report lower maximum spindle speeds, such as 3,300 RPM, showing that spindle configuration can vary between individual machines.


MAZAK QUICK TURN NEXUS 300 – TOOL CHANGER / TURRET

The QTN 300 is equipped with an automatic turret designed to provide multiple cutting tools for a complete turning cycle. Documented machines have a 12-station turret, with approximately 0.2-second indexing time for one position on a documented configuration.

SpecificationDetails
Tool ChangerAutomatic Turret
Turret TypeDrum Turret on documented machine
Tool Stations12
Turret Index TimeApproximately 0.2 sec / position
Tool Shank SizeApproximately 1 inch square documented
Boring Bar DiameterApproximately 1.5–2 inches configuration dependent
Turning ToolsYes
Boring ToolsYes
Threading ToolsYes
Grooving ToolsYes
Facing ToolsYes
Tool PresetterConfiguration Dependent
Automatic Tool EyeDocumented
Live ToolingNo on standard QTN 300
Tool ManagementCNC Controlled

A 12-station turret provides sufficient tool capacity for many production parts while keeping the machine’s tooling system relatively simple.


MAZAK QUICK TURN NEXUS 300 – CONTROL SYSTEM

The QTN 300 is commonly associated with the MAZATROL 640T NEXUS CNC control. A documented 2005 machine uses MAZATROL PC-Fusion 640T with a 10.4-inch color LCD, while other machines are identified specifically as MAZATROL 640T NEXUS.

The control can support conversational MAZATROL programming while also providing EIA/ISO programming capabilities on appropriately equipped machines.

SpecificationDetails
CNC ControlMAZATROL
Documented ControlMAZATROL 640T NEXUS
Alternate DescriptionMAZATROL PC-FUSION 640T
Display10.4-inch Color LCD documented
Axis ControlX / Z
Conversational ProgrammingYes
EIA/ISO ProgrammingConfiguration Dependent
Tool Offset ManagementYes
Work Offset ManagementYes
Tool Wear CompensationYes
Background Tool Path CheckDocumented
Machining Navi MonitorDocumented
EthernetConfiguration Dependent
RS232Documented
Memory Card InterfaceConfiguration Dependent
Automatic Tool EyeConfiguration Dependent

A documented 2005 machine includes the EIA/ISO option package, Ethernet, IC memory-card interface, PCM/CIA interface, and RS232 interface.


MAZAK QUICK TURN NEXUS 300 – COOLANT / CHIP MANAGEMENT

The QTN 300 is intended for production turning and can be equipped with a dedicated coolant system and chip conveyor. A documented machine has a coolant system rated at approximately 118 PSI and 16 GPM, together with a chip conveyor.

Chip management is particularly important when the machine is used for continuous turning of steel and other materials that produce large volumes of chips.

SpecificationDetails
Coolant SystemYes
Flood CoolantYes
Coolant PressureApproximately 118 PSI documented
Coolant FlowApproximately 16 GPM documented
Coolant TankYes
Chip ConveyorConfiguration Dependent
Side-Discharge ConveyorDocumented
Chip RemovalAutomatic / Conveyor Dependent
FiltrationConfiguration Dependent
High-Pressure CoolantConfiguration Dependent
Through-Tool CoolantConfiguration Dependent
Splash GuardingYes
Full Coverage GuardingDocumented
WashdownConfiguration Dependent

The exact coolant pump and chip-conveyor specifications should be verified against the individual machine.


MAZAK QUICK TURN NEXUS 300 – POWER REQUIREMENTS

Electrical requirements depend on the exact spindle motor, coolant equipment, chip conveyor, control, hydraulic system, transformer, and accessories installed on the machine.

A documented QTN 300 uses a 35 HP / approximately 26.1 kW spindle motor, but total connected electrical load will be higher once auxiliary systems are included.

SpecificationDetails
Spindle Motor35 HP documented
Spindle Motor PowerApproximately 26.1 kW
CNC Control PowerConfiguration Dependent
Hydraulic SystemConfiguration Dependent
Coolant PumpConfiguration Dependent
Chip ConveyorConfiguration Dependent
Tool PresetterConfiguration Dependent
Automatic Tool EyeConfiguration Dependent
TransformerConfiguration Dependent
VoltageVerify Machine Nameplate
PhaseVerify Machine Nameplate
FrequencyVerify Machine Nameplate
Total Connected LoadVerify Individual Machine

The machine’s electrical nameplate should always be used when preparing for installation.


MAZAK QUICK TURN NEXUS 300 – DIMENSIONS

The QTN 300 requires substantially more floor space than smaller QUICK TURN models. A documented long-bed QTN 300 has overall dimensions of approximately 137 inches × 80 inches × 79 inches and a machine weight of approximately 17,200 pounds.

Another documented configuration lists approximately 135.8 × 80.7 inches of floor-space requirements and a weight of approximately 16,314 pounds.

SpecificationDetails
Approximate Machine Length136–137 inches documented
Approximate Machine Width80 inches
Approximate Machine Height79 inches
Machine WeightApproximately 16,300–17,200 lb documented
Floor SpaceConfiguration Dependent
Chip Conveyor SpaceAdditional space required
Shipping WeightVerify Individual Machine
Shipping DimensionsVerify Individual Machine
Service ClearanceRequired
Loading AccessRequired
Door ClearanceVerify Individual Machine

The chip conveyor can extend beyond the main machine footprint, so installation planning should account for the complete machine and accessories.


MAZAK QUICK TURN NEXUS 300 – GENERAL INFORMATION

SpecificationDetails
ManufacturerMAZAK
ModelQUICK TURN NEXUS 300
Machine TypeCNC Turning Center
Machine CategoryLathe
Axis Configuration2 Axis
X Axis TravelApproximately 8.85–10.13 inches
Z Axis TravelApproximately 48.75–49 inches
Maximum SwingApproximately 26.77–29.5 inches
Maximum Turning DiameterApproximately 16.53 inches
Machining LengthApproximately 48.23 inches documented
Chuck Size10–12 inches documented
Spindle BoreApproximately 3.46 inches
Bar CapacityApproximately 3–3.5 inches
Spindle NoseA2-8
Spindle Motor35 HP documented
Maximum Spindle SpeedUp to 4,000 RPM documented
Turret12 Station
TailstockYes
Programmable TailstockConfiguration Dependent
Automatic Tool EyeConfiguration Dependent
Chip ConveyorConfiguration Dependent
CNC ControlMAZATROL 640T NEXUS
Live ToolingNo on standard configuration
Sub SpindleNo
Machine WeightApproximately 16,000–17,200 lb documented
Exact SpecificationsVerify Individual Machine

INDUSTRIES THAT USE MAZAK QUICK TURN NEXUS 300

Automotive Manufacturing

The QTN 300 can produce automotive shafts, hubs, bushings, spacers, brake-related components, transmission components, and other rotational parts. Its 35 HP spindle provides the cutting capability required for production work in steel and other common automotive materials.

Aerospace Manufacturing

Aerospace suppliers can use the QTN 300 for shafts, fittings, housings, sleeves, brackets, and other turned components. The machine’s long machining capacity is useful for components where length is a significant portion of the overall geometry.

Oil and Gas

The machine’s large spindle bore and turning diameter make it suitable for oil-and-gas components such as sleeves, fittings, shafts, flanges, and other cylindrical components.

Hydraulic Manufacturing

Hydraulic manufacturers can use the QTN 300 for cylinders, valve components, pistons, sleeves, manifolds, and precision turned fittings.

Industrial Machinery

Manufacturers of pumps, compressors, gearboxes, machine tools, and automation equipment can use the machine for shafts, housings, rollers, bushings, and other mechanical components.

Heavy Equipment

Construction and agricultural equipment manufacturers can use the QTN 300 for pins, shafts, hubs, bushings, rollers, and other large rotational components.

General Job Shops

Job shops can benefit from the machine’s broad turning envelope and 12-station turret. It can accommodate a variety of customer work without requiring the specialized configuration of a dedicated production lathe.

Contract Manufacturing

Contract manufacturers can use the QTN 300 for repetitive production runs where consistent turning accuracy, automatic tool indexing, coolant delivery, and chip removal are important.


TYPICAL PARTS MAZAK QUICK TURN NEXUS 300 CAN PRODUCE

Part TypeTypical Operations
ShaftsOD Turning, Facing, Grooving
Drive ShaftsTurning, Threading
Hydraulic CylindersOD Turning, Boring
PistonsTurning, Grooving
BushingsOD / ID Turning
SleevesTurning, Boring
FlangesFacing, OD / ID Turning
HubsTurning, Boring
RollersOD Turning, Facing
Bearing HousingsTurning, Boring
Valve ComponentsTurning, Threading
Pump ComponentsTurning, Boring
Compressor ComponentsTurning
Gear BlanksOD Turning
SpacersTurning, Facing
PinsTurning, Grooving
FittingsTurning, Threading
Machine Tool ComponentsPrecision Turning
Industrial ComponentsTurning, Facing, Boring
Custom Job-Shop PartsConfiguration Dependent

WHY CHOOSE MAZAK QUICK TURN NEXUS 300

The first major advantage of the QTN 300 is its large turning capacity. With maximum turning diameters around 16.5 inches and long-bed configurations approaching 48 inches of machining length, the machine can accommodate workpieces beyond the practical range of many smaller CNC lathes.

The 35 HP spindle provides substantial cutting power for a machine of this class. This allows the QTN 300 to perform aggressive roughing operations while retaining the spindle speed necessary for finishing and general production work.

The A2-8 spindle nose and approximately 3.46-inch spindle bore provide useful workholding and bar-stock capacity. A documented machine has approximately 3 inches of standard bar capacity, while other listings identify approximately 3.5 inches.

The 12-station automatic turret is another important production feature. Multiple tools can remain installed simultaneously, reducing setup time and allowing turning, boring, threading, grooving, and finishing operations to be performed in one cycle.

The MAZATROL 640T NEXUS control gives the machine a production-oriented CNC platform with conversational programming and, on appropriately equipped machines, EIA/ISO capability and modern communication options for its generation.

The QTN 300 can also be equipped with a programmable tailstock and automatic tool eye, both of which can reduce setup time and improve production consistency.

The machine’s chip conveyor and coolant system make it better suited to continuous production than a basic CNC lathe without automated chip handling. A documented machine uses a 118 PSI, 16 GPM coolant system.

Finally, the QTN 300 provides a strong balance between machine complexity and capability. Shops that primarily need turning operations can obtain substantial spindle power and work envelope without paying for the additional complexity of a Y-axis, second spindle, or full mill-turn platform.


WHY BUY USED MAZAK QUICK TURN NEXUS 300

A used QTN 300 can provide manufacturers with substantial CNC turning capacity at a potentially lower acquisition cost than a comparable new machine.

The machine’s 35 HP spindle, large chuck options, 3-inch-plus bar capacity, and long machining length make it suitable for work that may be too demanding for smaller used CNC lathes.

A used QTN 300 can also be attractive because many machines already include production accessories such as hydraulic chucks, tailstocks, automatic tool setters, chip conveyors, coolant systems, and tooling.

For example, a documented 2005 machine includes a 10-inch chuck, hydraulic tailstock, tool presetter, chip conveyor, coolant system, Ethernet, EIA/ISO option, and MAZATROL 640T NEXUS control.

The machine is also suitable for shops that need long turning capacity. A 48-inch cutting-length configuration can handle substantially longer components than compact production turning centers.

The QTN 300’s 2-axis architecture can be beneficial when the shop does not need milling or Y-axis operations. Operators can focus on conventional CNC turning processes without the additional programming and maintenance requirements associated with a full mill-turn machine.

However, the age and operating history of a used QTN 300 should be considered carefully. Buyers should inspect the spindle, ball screws, guideways, turret, tailstock, chuck, hydraulic system, CNC control, coolant system, and chip conveyor before purchase.

Spindle condition is particularly important. A machine with a worn spindle bearing or damaged spindle taper can require a significant repair investment.

Axis geometry should also be checked. A machine that has spent many years turning heavy components may show wear in the guideways or ball screws, particularly in frequently used portions of the travel.

The buyer should also verify that all included accessories actually operate correctly. Tool eye, tailstock, turret indexing, chuck clamping, chip conveyor, coolant pump, hydraulic system, and CNC functions should be tested under power before completing a purchase whenever possible.


HOW MUCH DOES A USED MAZAK QUICK TURN NEXUS 300 COST?

The price of a used MAZAK QUICK TURN NEXUS 300 varies substantially depending on year, spindle condition, machining hours, chuck size, bed length, control, turret, tailstock, tooling, chip conveyor, coolant equipment, and overall condition.

Current and recent used listings demonstrate this configuration variability. A documented 2005 QTN 300 is listed with 8,450 cutting hours, 48-inch cutting length, 10-inch chuck, tailstock, tool presetter, chip conveyor, and MAZATROL 640T NEXUS control.

A separate 2005 machine is documented with a 12-inch chuck, 48.23-inch machining length, 35 HP spindle, 4,000 RPM spindle speed, 12-tool turret, and MAZATROL PC-Fusion 640T control.

A 2004 QTN 300 listing demonstrates another configuration, with a 12-inch chuck, approximately 3.5-inch bar capacity, 30 HP power rating, and manual 4-jaw chuck.

Used Machine Pricing FactorEffect on Value
Machine YearMajor valuation factor
Cutting HoursImportant
Spindle ConditionMajor valuation factor
Axis ConditionMajor valuation factor
Maximum Machining LengthImportant
Chuck SizeImportant
Bar CapacityImportant
Spindle MotorMajor capacity factor
Spindle SpeedImportant
Turret ConditionMajor valuation factor
TailstockAdds capability
Programmable TailstockAdds production value
Automatic Tool EyeAdds setup efficiency
Chip ConveyorAdds production value
Coolant SystemImportant
CNC ControlImportant
ToolingCan reduce startup cost
Maintenance HistoryImportant
Machine AccuracyMajor valuation factor
Asking PriceMust be verified for individual machine
Actual Sale PriceMay differ from asking price

Because QTN 300 machines are offered in substantially different configurations, there is no single used-market price that accurately represents every machine.

A shorter-bed QTN 300 with basic workholding should not be valued the same as a long-bed machine with a 35 HP spindle, 12-inch chuck, programmable tailstock, automatic tool eye, chip conveyor, tooling, and documented maintenance history.

For buyers, the best way to evaluate a used QTN 300 is to compare the complete machine configuration, operating hours, physical condition, included accessories, and demonstrated machining accuracy rather than relying on the model name alone.

A properly maintained MAZAK QUICK TURN NEXUS 300 remains a capable production CNC lathe for manufacturers requiring a combination of large turning capacity, strong spindle power, long machining length, automatic tooling, and MAZATROL CNC control. Its configuration makes it particularly useful for automotive, industrial machinery, hydraulic, oil and gas, heavy equipment, aerospace, and general job-shop applications.