USED USED MAZAK HCN 6800II – 2008 - CNC Machine For Sale - USA

USED MAZAK HCN 6800II – 2008

MAKE: MAZAK
MODEL: HCN6800
TYPE: Horizontal Machine
YEAR: 2008
SKU: 112167
DEALER: Orca Machine Tools Inc
COUNTRY: USA

USED MAZAK HCN 6800II – 2008

The MAZAK HCN 6800II – 2008 is a heavy-duty horizontal machining center designed for high-productivity machining of medium-to-large components. With a large 630 mm × 630 mm pallet, approximately 1,050 mm of X-axis travel, 900 mm of Y-axis travel, and 980 mm of Z-axis travel, the HCN 6800II provides a substantial machining envelope for manufacturers that require more capacity than a conventional vertical machining center can provide. The horizontal spindle configuration also provides natural chip evacuation during many machining operations and is well suited to production environments where multiple faces of a component must be machined efficiently.

The HCN 6800II is part of the Mazak HCN horizontal machining center family, which was developed around high rigidity, substantial axis travel, palletized production, and a range of spindle and automation configurations. The documented 2008 machines commonly use a Mazatrol Matrix Nexus control, CAT 50 spindle tooling, a high-torque spindle, and two 24.8-inch-square pallets. The exact machine configuration can vary considerably, however, particularly in spindle speed, automatic tool-changer capacity, coolant equipment, probing, and pallet automation.

A major feature of the HCN 6800II is its twin-pallet configuration. Two 24.8-inch × 24.8-inch pallets allow the operator to load or unload one pallet while machining can continue on the other. This can reduce non-cutting time and make the machine particularly useful for production environments where machine utilization is important. The documented pallet load capacity is approximately 3,300 pounds, giving the machine substantial workholding capability for heavy components and fixtures.

The machine provides approximately 41.43 inches of X-axis travel, 35.43 inches of Y-axis travel, and 38.58 inches of Z-axis travel on the documented 2008 configuration. This large envelope can accommodate substantial workpieces, large fixtures, tombstones, and multi-part production setups. The published HCN-6800 specifications also identify a maximum workpiece size of approximately 41.34 inches in diameter by 51.18 inches in height, subject to the actual pallet, fixture, spindle, and machine configuration.

The CAT 50 spindle gives the HCN 6800II the tooling interface needed for heavy-duty machining. CAT 50 tooling is commonly used for high-power milling applications where rigidity and toolholding strength are important. Documented 2008 HCN 6800II machines are equipped with high-torque spindle configurations, with an 8,000 RPM spindle appearing on several machines. Other 2008 machines were configured with 10,000 or 16,000 RPM spindles, demonstrating that the exact spindle specification must be confirmed for each individual machine.

The machine’s full fourth-axis B-axis capability is another major advantage. The pallet can rotate for indexed or contouring operations, allowing manufacturers to machine multiple sides of a component without removing it from the fixture. One documented configuration specifies 0.001-degree B-axis positioning, while other used listings describe full 360-degree, 360,000-position rotary capability. This capability is particularly valuable for complex housings, valve bodies, manifolds, gear cases, and components requiring machining around several faces.

Tool capacity also varies by configuration. A documented 2008 machine has a 43-position automatic tool changer, while other 2008 HCN 6800II machines have been equipped with 60-, 80-, 120-, or much larger tool-storage systems as part of palletized production installations. For an individual used machine, the actual ATC capacity should always be confirmed from the machine’s serial-number documentation and physical tool magazine.

The Mazatrol Matrix Nexus CNC control provides a powerful control platform for the machine’s multi-axis machining capabilities. Depending on configuration, HCN 6800II machines can include features such as conversational programming, EIA/ISO programming, probing, tool measurement, tool-breakage detection, tilted work plane functions, helical tapping, coordinate transformations, and other advanced machining functions. Some of these features are options rather than universal standard equipment.

The HCN 6800II is therefore particularly attractive to manufacturers that need heavy-duty horizontal machining, large workpiece capacity, palletized production, and multi-face machining. A properly maintained used 2008 machine can provide substantial production capability at a lower acquisition cost than a comparable new horizontal machining center. Because the machine is now more than 18 years old, however, buyers should place considerable emphasis on spindle condition, axis accuracy, pallet changer operation, B-axis positioning, control condition, ATC operation, coolant system, and maintenance history.


MAZAK HCN 6800II – AXIS

SpecificationDetails
Machine TypeCNC Horizontal Machining Center
Primary Configuration4-Axis Horizontal Machining
X-AxisYes
Y-AxisYes
Z-AxisYes
B-AxisYes
B-Axis FunctionFull Rotary / 4th-Axis Pallet Indexing
B-Axis Positioning0.001 Degree on Documented Configuration
X-Axis Travel41.43 in / 1,050 mm
Y-Axis Travel35.43 in / 900 mm
Z-Axis Travel38.58 in / 980 mm
Pallets2
Pallet Size24.8 × 24.8 in / 630 × 630 mm
CNC ControlMazatrol Matrix Nexus
Spindle TaperCAT 50
Machine CategoryHorizontal Machines
Primary ApplicationHeavy-Duty Horizontal Machining

The HCN 6800II’s fourth-axis architecture allows the workpiece to be rotated around the B-axis while remaining securely mounted to the pallet. This is especially valuable for machining several faces of a component in one setup and can significantly reduce manual repositioning.


MAZAK HCN 6800II – AXIS TRAVELS / WORK ENVELOPE

SpecificationDetails
X-Axis Travel41.43 in / 1,050 mm
Y-Axis Travel35.43 in / 900 mm
Z-Axis Travel38.58 in / 980 mm
X-Axis DirectionColumn Right / Left
Y-Axis DirectionSpindle Up / Down
Z-Axis DirectionTable Back / Forth
Pallet Surface to Spindle CenterApproximately 3.94–39.37 in
Pallet Center to Spindle Gage LineApproximately 3.94–42.52 in
Maximum Workpiece DiameterApproximately 41.34 in / 1,050 mm
Maximum Workpiece HeightApproximately 51.18 in / 1,300 mm
Work EnvelopeLarge Horizontal Machining Envelope
Multi-Side MachiningYes
Fourth-Axis MachiningYes

The combination of 1,050 mm X travel, 900 mm Y travel, and 980 mm Z travel gives the HCN 6800II a substantial work envelope. Mazak’s published HCN-6800 specifications confirm these axis strokes and the associated workpiece envelope.

The generous Y and Z movements are especially useful for tall fixtures, large housings, deep pockets, and components that require considerable tool clearance. The horizontal orientation also provides favorable access for chip evacuation during many machining operations.


MAZAK HCN 6800II – CAPACITY / PALLET

SpecificationDetails
Number of Pallets2
Pallet Size24.8 × 24.8 in / 630 × 630 mm
Pallet Load CapacityApproximately 3,300 lb / 1,497 kg
Pallet TypeAutomatic Pallet System
Pallet IndexingFull 4th Axis
B-AxisYes
B-Axis Resolution0.001 Degree on Documented Configuration
Maximum Workpiece DiameterApproximately 41.34 in
Maximum Workpiece HeightApproximately 51.18 in
Maximum Workpiece WeightApproximately 3,307 lb / 1,500 kg in published specification
WorkholdingFixture, Vise, Tombstone, Rotary Workholding
Production LoadingTwin-Pallet

The 630 × 630 mm pallet is large enough to support substantial fixtures and multi-part production setups. The two-pallet arrangement also provides a major productivity advantage because one pallet can be prepared while the other is inside the machining enclosure.

The documented 2008 machines list pallet capacities around 3,300 pounds, although actual usable capacity should be determined from the machine’s individual documentation and the distribution of the workpiece and fixture weight.


MAZAK HCN 6800II – SPINDLE

SpecificationDetails
Spindle OrientationHorizontal
Spindle TaperCAT 50
Standard Documented Speed8,000 RPM
Other Configurations10,000 RPM / 16,000 RPM
Spindle TypeHigh-Torque
Main MotorApproximately 50 HP
Continuous Motor RatingApproximately 40 HP on documented configuration
Published Motor Rating50 HP / 37 kW
Number of Spindle Ranges2 on documented configuration
Spindle TorqueApproximately 890 ft-lb on documented 8,000 RPM configuration
Heavy-Duty MachiningYes
High-Speed MachiningConfiguration Dependent
Through-Spindle CoolantAvailable / Configuration Dependent
Spindle ChillerAvailable / Configuration Dependent

The HCN 6800II was available with different spindle configurations. The documented 2008 machine currently listed by several dealers uses an 8,000 RPM high-torque spindle and approximately 50 HP motor, while other 2008 machines were configured with 10,000 RPM or 16,000 RPM spindles.

This variation is important when comparing used machines. An 8,000 RPM high-torque spindle may be more appropriate for heavy steel machining and large-diameter cutters, while a higher-speed spindle may be advantageous for aluminum, smaller tools, and high-speed machining applications.

The CAT 50 taper provides the rigidity required for substantial cutting forces. For a used machine, spindle condition should be evaluated through warm-up testing, vibration monitoring, taper inspection, spindle runout measurement, bearing noise evaluation, and load testing.


MAZAK HCN 6800II – TOOL CHANGER

SpecificationDetails
Automatic Tool ChangerYes
Documented Standard ATC43 Positions
Other Configurations60 / 80 / 120 / 240 Positions
Tool InterfaceCAT 50
Maximum Tool LengthApproximately 24.8 in / 630 mm
Maximum Tool DiameterApproximately 4.92 in / 125 mm
Maximum Tool Diameter with Adjacent Empty PocketApproximately 9.84 in / 250 mm
Maximum Tool WeightApproximately 66 lb / 30 kg
Tool Change TimeApproximately 4.2 sec on documented 43-tool configuration
Tool MeasurementAvailable
Tool Breakage DetectionAvailable
Automatic Tool ManagementConfiguration Dependent

The 43-position ATC is a well-documented configuration for the 2008 HCN 6800II. Other machines have significantly larger tool magazines, especially HCN systems integrated with Palletech automation.

The large CAT 50 tool capacity is well suited to jobs requiring multiple roughing, finishing, drilling, boring, tapping, chamfering, and specialty tools. Tool capacity becomes particularly important when the HCN 6800II is used in high-mix production, because a large tool magazine can reduce the frequency of tool changes between jobs.


MAZAK HCN 6800II – CONTROL SYSTEM

SpecificationDetails
CNC ControlMazatrol Matrix Nexus
Control ManufacturerMazak
Control TypeMazatrol Conversational CNC
DisplayColor CNC Display
EIA/ISO ProgrammingAvailable
Conversational ProgrammingYes
3D Machining FunctionsConfiguration Dependent
Coordinate TransformationAvailable
Helical TappingAvailable
Tilted Work PlaneAvailable
Tool MeasurementAvailable
Tool Breakage DetectionAvailable
ProbingConfiguration Dependent
USB / Data TransferConfiguration Dependent
Windows-Based FunctionsConfiguration Dependent
Manual Pulse GeneratorAvailable / Configuration Dependent

The Mazatrol Matrix Nexus control is a key component of the HCN 6800II. Documented used machines list functions including EIA/ISO programming, EIA 3D compensation, helical tapping, tilted work plane, polar coordinates, tool measurement, tool-breakage detection, and other advanced functions. The precise software package varies by individual machine.

For a used 2008 HCN 6800II, buyers should inspect the control carefully. The display, keyboard, control boards, memory, program storage, data-transfer capability, servo drives, spindle drive, and machine parameters should all be verified before purchase.


MAZAK HCN 6800II – COOLANT / CHIP MANAGEMENT

SpecificationDetails
Coolant SystemYes
Flood CoolantYes
Through-Spindle CoolantAvailable
Documented High-Pressure Coolant213 PSI on Certain Configuration
Higher-Pressure TSCAvailable on Some Machines
Chip ConveyorYes
Chip ManagementHorizontal Machining Chip Evacuation
Spindle ChillerAvailable
Workpiece Air BlastAvailable
Coolant FiltrationConfiguration Dependent
Mist CollectorAvailable on Certain Machines
Auto Pecking with Load DetectionAvailable on Certain Machines

The horizontal design of the HCN 6800II is particularly useful for chip evacuation because chips can fall away from the cutting area rather than accumulating around the workpiece as readily as they can on some vertical machines.

Documented 2008 machines include chip conveyors, through-spindle coolant, high-pressure coolant systems, and spindle chillers. One machine lists 213 PSI through-spindle coolant, while other configurations have been equipped with significantly higher-pressure systems.

For used equipment, the coolant system should be inspected thoroughly. The pump, tank, filters, coolant lines, rotary unions, spindle passages, nozzles, chip conveyor, and filtration system should all be tested.


MAZAK HCN 6800II – POWER REQUIREMENTS

SpecificationDetails
Main Spindle MotorApproximately 50 HP
Continuous Spindle RatingApproximately 40 HP on Documented Configuration
Motor OutputApproximately 37 kW
Spindle SpeedConfiguration Dependent
Electrical SupplyVerify Machine Nameplate
VoltageVerify Individual Machine
PhaseVerify Individual Machine
FrequencyVerify Individual Machine
TransformerVerify Based on Installation
High-Pressure CoolantAdditional Electrical Load
Chip ConveyorAdditional Electrical Load
Pallet SystemAdditional Electrical Load
Palletech SystemAdditional Load When Equipped

The HCN 6800II is a large industrial machining center, and its facility requirements are considerably greater than those of a small VMC. The exact electrical requirements should be obtained from the machine’s electrical documentation and nameplate.

A machine equipped with a large tool magazine, high-pressure coolant, chip conveyor, spindle chiller, probing, and pallet automation will have additional utility requirements compared with a basic machine.


MAZAK HCN 6800II – DIMENSIONS

SpecificationDetails
Machine WeightApproximately 41,800–44,800 lb depending on configuration
Approximate Weight19,000–20,321 kg
Machine LengthApproximately 226 in on documented configuration
Machine WidthApproximately 120–129 in depending on configuration
Machine HeightApproximately 133–134 in
Installation FootprintLarge Industrial Footprint
Chip ConveyorAdds to Overall Footprint
Pallet AutomationSubstantially Increases Footprint
Palletech SystemRequires Additional Floor Space
RiggingHeavy Industrial Rigging Required

Published specifications show machine weights ranging from approximately 41,800 to 44,800 pounds depending on configuration, while a 2008 machine with twin pallets and associated equipment is listed at approximately 226 × 129 × 133 inches. Another documented machine with a Palletech installation is substantially larger.

This is a machine that requires serious installation planning. Buyers should verify door openings, ceiling height, floor loading, rigging access, truck access, electrical service, coolant requirements, and service clearance before arranging transportation.


MAZAK HCN 6800II – GENERAL INFORMATION

SpecificationDetails
ManufacturerMAZAK
ModelHCN 6800II
Year2008
Machine TypeHorizontal Machining Center
CategoryHorizontal Machines
Configuration4-Axis
Pallets2
Pallet Size24.8 × 24.8 in
Pallet CapacityApproximately 3,300 lb
X-Axis Travel41.43 in
Y-Axis Travel35.43 in
Z-Axis Travel38.58 in
B-AxisFull 4th Axis
Spindle TaperCAT 50
Standard Documented Spindle8,000 RPM High Torque
Spindle MotorApproximately 50 HP
Documented ATC43 Positions
ControlMazatrol Matrix Nexus
Chip ConveyorYes
Through-Spindle CoolantAvailable
High-Pressure CoolantAvailable
Spindle ChillerAvailable
Palletech AutomationAvailable on Certain Machines
Primary ApplicationHeavy-Duty Horizontal Machining

INDUSTRIES THAT USE MAZAK HCN 6800II

The automotive industry can use the HCN 6800II for machining engine components, transmission housings, suspension components, tooling, fixtures, brackets, and other medium-to-large parts. The twin-pallet configuration is particularly useful for production environments where minimizing setup and loading time is important.

The aerospace industry can benefit from the machine’s large work envelope and multi-axis machining capability. Large structural components, housings, fixtures, brackets, and tooling can be produced using horizontal machining strategies. The fourth-axis capability allows features to be machined around multiple faces without repeatedly removing the component from the fixture.

The oil and gas industry is another strong application. Valve bodies, pump components, manifolds, flanges, drilling equipment components, and other large industrial parts can require substantial machining capacity. The CAT 50 spindle and high-torque configuration provide the rigidity required for many heavy cutting operations.

The heavy equipment industry can use the HCN 6800II for construction machinery, agricultural machinery, mining equipment, and industrial equipment components. Large brackets, housings, mounting plates, hydraulic components, and structural parts can be machined within the machine’s large work envelope.

The energy and power-generation industry can use horizontal machining centers for turbine-related components, housings, pump components, fixtures, and other industrial equipment. The fourth axis can simplify the machining of components that require multiple angular orientations.

The industrial machinery industry is another natural application. Machine builders frequently require large housings, bases, fixtures, gear cases, brackets, and other components that may require multiple machining operations. The HCN 6800II can consolidate many of these operations into a single setup.

The mold and die industry can use the machine for large mold bases, die components, inserts, tooling, and fixture components. The CAT 50 spindle and large axis travel provide the capability required for larger tooling projects, while the automatic tool changer allows multiple cutting tools to remain available throughout a machining program.

The general contract machining and job-shop industry can take advantage of the HCN 6800II’s flexibility. The large work envelope allows a shop to accept larger jobs while the fourth axis provides additional capability for complex components. A twin-pallet machine can also be useful when the shop handles repeated production work.


TYPICAL PARTS MAZAK HCN 6800II CAN PRODUCE

Part TypeTypical Machining Operations
Transmission HousingsMilling, Boring, Drilling, Tapping
Engine ComponentsFacing, Pocketing, Drilling
Hydraulic Valve BodiesBoring, Drilling, Milling
Pump HousingsBoring, Pocketing, Drilling
Gearbox HousingsMilling, Boring, Tapping
Aerospace Structural PartsMilling, Drilling, Contouring
Large FixturesMilling, Drilling, Reaming
Machine BasesFacing, Pocketing, Drilling
Industrial BracketsMilling, Drilling, Tapping
ManifoldsDrilling, Boring, Tapping
FlangesFacing, Drilling, Boring
Heavy Equipment ComponentsHeavy Milling, Drilling
Mold BasesFacing, Pocketing, Contouring
Die ComponentsRoughing, Finishing, Drilling
Pump ComponentsMilling, Boring, Drilling
Valve ComponentsMulti-Side Machining
Gear CasesBoring, Drilling, Milling
Industrial ToolingMilling, Drilling, Tapping
Large Aluminum ComponentsHigh-Speed Milling
Steel ComponentsHeavy-Duty Milling

WHY CHOOSE MAZAK HCN 6800II

The primary reason to choose the MAZAK HCN 6800II is its combination of large work capacity and horizontal machining capability. The approximately 1,050 × 900 × 980 mm axis travel gives the machine enough room for substantial components while maintaining the advantages of a production-oriented HMC.

The twin-pallet configuration can significantly improve productivity. While one pallet is being loaded or unloaded, the second pallet can remain in the machining area. This minimizes idle time and allows operators to prepare the next job while machining continues.

The CAT 50 spindle provides the rigidity required for demanding cutting applications. Compared with smaller spindle interfaces, CAT 50 tooling is well suited to larger cutters and higher cutting forces, making the HCN 6800II particularly attractive for heavy machining.

The full fourth-axis capability is another major benefit. Components can be rotated to different positions, allowing machining on multiple faces without repeatedly removing and repositioning the part. This can improve accuracy because several features can be referenced from a common fixture setup.

The Mazatrol Matrix Nexus control provides both conversational and conventional programming capabilities. This makes the machine suitable for shops that need flexibility between repeat production jobs and one-off or short-run machining work.

The automatic tool changer provides considerable production flexibility. A 43-tool configuration can support many machining operations, while larger 60-, 80-, 120-, and 240-tool configurations have also been used on HCN systems. The exact ATC should be verified on the machine being purchased.

The machine is also designed for high-productivity horizontal machining. Horizontal orientation, automatic pallet changing, high-pressure coolant, chip conveyors, tool measurement, probing, and other available production features can reduce non-cutting time and improve machine utilization.

Finally, the HCN 6800II is attractive because it offers a combination of size, rigidity, automation, and fourth-axis machining that would be expensive to duplicate with several smaller machines. A properly maintained used machine can therefore provide considerable production value.


WHY BUY USED MAZAK HCN 6800II

A used MAZAK HCN 6800II can give manufacturers access to a large horizontal machining platform without the capital expenditure associated with purchasing a new high-capacity HMC.

One of the biggest benefits of buying used is access to heavy-duty machine construction at a reduced acquisition cost. The HCN 6800II was designed for industrial production, and its CAT 50 spindle, large travels, substantial machine mass, and pallet system make it capable of demanding machining applications.

The twin-pallet arrangement can also make a used machine highly productive. For shops running repeat work, the ability to load one pallet while the other is machining can provide a significant improvement in operator efficiency.

The machine’s fourth-axis capability is another reason to consider a used unit. A buyer may otherwise need separate fixtures, multiple setups, or additional machines to achieve the same multi-face machining capability.

A used HCN 6800II can also be attractive because many machines are sold with valuable accessories already installed. Depending on the individual machine, these can include chip conveyors, high-pressure through-spindle coolant, Renishaw probes, automatic tool measurement, spindle chillers, tool-breakage detection, and other production equipment.

For shops already using Mazak equipment, the Mazatrol Matrix control environment can make integration easier. Existing operators and programmers may already understand Mazatrol programming, setup procedures, tool management, and machine diagnostics.

However, the age of a 2008 machine means buyers must focus heavily on condition. The spindle, ballscrews, linear guides, pallet changer, B-axis, ATC, coolant system, chip conveyor, electrical cabinet, CNC control, and probing system should all be inspected.

Machine accuracy should also be tested rather than assumed. A ball-bar test, laser measurement, spindle inspection, axis positioning test, and circular interpolation test can help identify mechanical or servo-related issues before purchase.

The complete machine package should also be evaluated. A machine with a healthy spindle, large ATC, functioning pallet changer, chip conveyor, high-pressure coolant, probing, and tooling may provide much better value than a lower-priced machine requiring substantial refurbishment.


HOW MUCH DOES A USED MAZAK HCN 6800II COST?

The price of a used MAZAK HCN 6800II – 2008 varies significantly according to spindle configuration, tool capacity, hours, pallet automation, machine condition, accessories, and location.

A currently advertised 2008 HCN 6800II in the United States is listed with two 24.8 × 24.8-inch pallets, 41.33-inch X travel, 35.43-inch Y travel, 38.58-inch Z travel, 8,000 RPM high-torque spindle, 40 HP spindle motor, and 43-tool ATC. The seller is currently requesting buyers to contact them for pricing rather than publishing a fixed asking price.

Another current 2008 listing provides the same general machine configuration with a Mazatrol Matrix Nexus control, 3,300-pound pallet capacity, CAT 50 spindle, 8,000 RPM high-torque spindle, and 43 ATC, but also does not publish a fixed price.

Historical 2008 machines demonstrate why prices can differ considerably. One sold HCN 6800-II had an 80-position ATC and 16,000 RPM CAT 50 BIG PLUS spindle, while another large installation included a 12-station Palletech system, nine pallets, 10,000 RPM spindle, and 240-tool capacity. These are substantially different production packages from a basic 43-tool, 8,000 RPM machine.

For that reason, buyers should not use a single advertised price as a universal value for every 2008 HCN 6800II.

Value FactorWhat Buyers Should Check
Machine Year2008
SpindleSpeed, torque, noise and vibration
Spindle Motor40/50 HP configuration
Spindle TaperCAT 50 / BIG PLUS if equipped
ATC43 / 60 / 80 / 120 / 240 configuration
PalletsNumber and condition
Pallet Size24.8 × 24.8 in
Pallet ChangerComplete operation
B-AxisPositioning accuracy and backlash
CNC ControlMazatrol Matrix Nexus condition
X/Y/Z AxesAccuracy and repeatability
BallscrewsWear and backlash
Linear GuidesWear and lubrication
CoolantPump, filtration and delivery
TSCPressure and rotary union condition
Chip ConveyorMotor and conveyor condition
ProbeRenishaw operation if equipped
Tool MeasurementOperation if equipped
Spindle ChillerOperation if equipped
Machine HoursTotal and cutting hours
MaintenanceService records
ToolingCAT 50 holders and accessories
AutomationPalletech / cell equipment if included
RiggingHeavy-machine transportation cost

A lower-priced HCN 6800II may appear attractive initially, but refurbishment costs can quickly change the economics if the spindle, pallet changer, B-axis, ATC, or CNC electronics require major work.

Conversely, a higher-priced machine with documented maintenance, good ball-bar results, a healthy spindle, functioning pallet system, high-pressure coolant, probing, and a substantial tooling package may represent considerably better value.

For a used MAZAK HCN 6800II – 2008, the most important consideration is therefore not simply the advertised purchase price. Buyers should compare the machine condition, configuration, included accessories, hours, maintenance history, and production readiness before determining the actual value of the machine.