USED OKUMA MB-5000H – 2015
The OKUMA MB-5000H – 2015 is a high-performance horizontal machining center designed for precision production and heavy-duty machining of medium-sized components. Okuma’s MB series is known for rigid machine construction, high-speed spindle performance, and strong thermal stability, making the MB-5000H well suited for demanding production environments.
The MB-5000H provides approximately 30 inches of X-axis travel, 28 inches of Y-axis travel, and 32 inches of Z-axis travel, depending on the specific configuration. The machine typically features a 500 mm pallet, allowing manufacturers to machine substantial workpieces while maintaining efficient chip evacuation and accessibility around the component.
A typical machine is equipped with a 12,000 RPM spindle and approximately 30 HP spindle motor, with CAT 40 tooling and a high-capacity automatic tool changer. The horizontal configuration allows chips to fall naturally away from the cutting area, making the machine particularly effective for deep-pocket machining, heavy roughing, and high-volume production.
The 2015 MB-5000H is an excellent choice for manufacturers seeking a rigid, automated horizontal machining platform for automotive, aerospace, energy, industrial equipment, and general precision manufacturing applications.
OKUMA MB-5000H – 2015 – AXIS
| Specification | Details |
|---|---|
| Machine Type | CNC Horizontal Machining Center |
| Axis Configuration | 4-Axis |
| X-Axis Travel | Approx. 30″ / 760 mm |
| Y-Axis Travel | Approx. 28″ / 710 mm |
| Z-Axis Travel | Approx. 32″ / 810 mm |
| B-Axis | 360° Indexing |
| B-Axis Increment | 1° Standard / Configuration Dependent |
| Simultaneous Interpolation | Available |
| Rigid Tapping | Standard |
| 4th-Axis Machining | Standard |
OKUMA MB-5000H – 2015 – WORK ENVELOPE
| Specification | Details |
|---|---|
| Pallet Size | 19.7″ x 19.7″ / 500 x 500 mm |
| Maximum Workpiece Diameter | Approx. 31.5″ |
| Maximum Workpiece Height | Approx. 39.4″ |
| Maximum Workpiece Weight | Approx. 1,100 lbs |
| Pallet Configuration | Dual Pallet |
| Pallet Change | Automatic |
| Rotary Table | Standard B-Axis |
| Workholding | Fixtures / Vises |
| Multiple Fixture Machining | Supported |
| Tombstone Machining | Excellent |
The horizontal layout and dual-pallet arrangement make the MB-5000H particularly effective for production environments where setup time and machine utilization are important.
OKUMA MB-5000H – 2015 – SPINDLE
| Specification | Details |
|---|---|
| Spindle Type | High-Speed Horizontal |
| Spindle Taper | CAT 40 |
| Maximum Spindle Speed | 12,000 RPM |
| Spindle Motor | Approx. 30 HP |
| Peak Power | Approx. 40 HP |
| Spindle Nose | CAT 40 |
| Spindle Cooling | Standard |
| Spindle Orientation | Standard |
| Rigid Tapping | Standard |
| Through-Spindle Coolant | Optional |
The 12,000 RPM spindle provides a strong combination of speed and torque for roughing and finishing a wide variety of materials.
OKUMA MB-5000H – 2015 – TOOL CHANGER
| Specification | Details |
|---|---|
| Tool Changer Type | Automatic |
| Tool Capacity | 32 Tools Standard |
| Expanded Capacity | Available |
| Tool Taper | CAT 40 |
| Tool Change | Automatic |
| Tool Management | CNC Controlled |
| Heavy Tool Support | Yes |
| Long Tool Support | Yes |
| Random Tool Selection | Standard |
| Tool-Life Management | Available |
The automatic tool changer supports unattended production and allows a large number of machining operations to be programmed within a single cycle.
OKUMA MB-5000H – 2015 – PALLET SYSTEM
| Specification | Details |
|---|---|
| Pallet Size | 500 x 500 mm |
| Number of Pallets | 2 |
| Pallet Change | Automatic |
| B-Axis | 360° |
| B-Axis Drive | Servo |
| Pallet Indexing | Automatic |
| Pallet Change Time | Approx. 8–12 sec |
| Fixture Capacity | Heavy-Duty |
| Tombstone Compatibility | Yes |
| Pallet Load | Approx. 1,100 lbs |
The dual-pallet system allows operators to load and unload one pallet while the machine continues machining the other, increasing spindle utilization.
OKUMA MB-5000H – 2015 – CONTROL SYSTEM
| Specification | Details |
|---|---|
| CNC Control | Okuma OSP-P300M |
| Programming | G-Code |
| Display | Color LCD |
| Tool Offset Management | Standard |
| Work Offset Management | Standard |
| Conversational Programming | Available |
| Rigid Tapping | Standard |
| Custom Macros | Available |
| Ethernet | Available |
| USB | Available |
| Diagnostics | Standard |
| Thermal Compensation | Standard |
The Okuma OSP-P300M control provides advanced machining functions, user-friendly programming, and integrated monitoring capabilities.
OKUMA MB-5000H – 2015 – FEEDRATES
| Specification | Details |
|---|---|
| X-Axis Rapid Traverse | Approx. 60 m/min |
| Y-Axis Rapid Traverse | Approx. 60 m/min |
| Z-Axis Rapid Traverse | Approx. 60 m/min |
| B-Axis Rapid Traverse | High-Speed Servo |
| Cutting Feedrate | Programmable |
| Feedrate Override | Standard |
| Linear Interpolation | Yes |
| Circular Interpolation | Yes |
| High-Speed Machining | Supported |
| Look-Ahead Control | Available |
OKUMA MB-5000H – 2015 – COOLANT & CHIP MANAGEMENT
| Specification | Details |
|---|---|
| Flood Coolant | Standard |
| Coolant Tank | Standard |
| High-Pressure Coolant | Optional |
| Through-Spindle Coolant | Optional |
| Chip Conveyor | Standard / Optional |
| Chip Management | Excellent |
| Coolant Filtration | Standard |
| Oil Skimmer | Optional |
| Mist Collector | Optional |
| Automatic Lubrication | Standard |
Horizontal machining provides natural chip evacuation, which is especially beneficial when machining deep pockets and large volumes of material.
OKUMA MB-5000H – 2015 – AUTOMATION
| Specification | Details |
|---|---|
| Dual Pallets | Standard |
| Automatic Pallet Changer | Standard |
| Automatic Tool Changer | Standard |
| Tool Presetter | Optional |
| Work Probe | Optional |
| Tool Probe | Optional |
| Pallet Pool Compatibility | Available |
| Robot Integration | Possible |
| Automated Loading | Supported |
| Lights-Out Production | Supported |
OKUMA MB-5000H – 2015 – POWER REQUIREMENTS
| Specification | Details |
|---|---|
| Main Spindle Motor | Approx. 30 HP |
| Electrical Service | Three-Phase |
| Input Voltage | 200 / 220V Configuration Dependent |
| Frequency | 50 / 60 Hz |
| Shop Air | Required |
| Hydraulic System | Standard |
| Lubrication System | Automatic |
| Electrical Cabinet | Okuma |
| Installation | Industrial |
OKUMA MB-5000H – 2015 – DIMENSIONS
| Specification | Details |
|---|---|
| Machine Width | Approx. 145″ |
| Machine Depth | Approx. 140″ |
| Machine Height | Approx. 115″ |
| Machine Weight | Approx. 30,000 lbs |
| Floor Space | Large |
| Installation | Industrial |
| Rigging | Required |
| Chip Conveyor | Configuration Dependent |
OKUMA MB-5000H – 2015 – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | Okuma |
| Model | MB-5000H |
| Year | 2015 |
| Machine Category | Horizontal Machining Center |
| Axis Configuration | 4-Axis |
| Pallet Size | 500 x 500 mm |
| Number of Pallets | 2 |
| X-Axis Travel | Approx. 30″ |
| Y-Axis Travel | Approx. 28″ |
| Z-Axis Travel | Approx. 32″ |
| B-Axis | 360° |
| Spindle Taper | CAT 40 |
| Spindle Speed | 12,000 RPM |
| Spindle Power | Approx. 30 HP |
| Tool Capacity | 32 |
| CNC Control | Okuma OSP-P300M |
INDUSTRIES THAT USE OKUMA MB-5000H
The OKUMA MB-5000H is commonly used in:
- Automotive
- Aerospace
- Defense
- Energy
- Heavy Equipment
- Industrial Machinery
- Oil & Gas
- Construction Equipment
- General Manufacturing
- Contract Machining
- Precision Engineering
- Die & Mold
TYPICAL PARTS OKUMA MB-5000H CAN PRODUCE
Typical components include:
- Engine components
- Transmission housings
- Gear housings
- Pump bodies
- Valve bodies
- Hydraulic components
- Machine bases
- Industrial housings
- Aerospace structural components
- Heavy equipment components
- Precision castings
- Large fixtures
Typical operations include face milling, pocket milling, contouring, drilling, boring, tapping, reaming, thread milling, and heavy material removal.
WHY CHOOSE OKUMA MB-5000H
The OKUMA MB-5000H is particularly attractive for manufacturers that need high production throughput combined with rigid horizontal machining capability. The 500 mm dual-pallet system allows workpieces to be prepared offline while another pallet is being machined, helping minimize spindle downtime.
Its horizontal spindle orientation also provides excellent chip evacuation during deep-pocket and heavy roughing operations. The CAT 40, 12,000 RPM spindle provides enough speed for finishing while retaining the rigidity necessary for production machining.
The combination of the OSP control, automatic pallet changer, automatic tool changer, and 4-axis B-axis machining makes the MB-5000H a versatile production platform.
WHY BUY USED OKUMA MB-5000H – 2015
A used 2015 OKUMA MB-5000H can offer substantial production capability at a lower investment than purchasing a new horizontal machining center.
Before purchasing, inspect the spindle, pallet changer, B-axis, ballscrews, linear guides, tool changer, coolant system, chip conveyor, hydraulic system, and OSP control. Check spindle runout, axis backlash, pallet positioning accuracy, B-axis indexing, and machine geometry.
A machine with low spindle hours, documented maintenance, high-pressure coolant, through-spindle coolant, probing, chip conveyor, and additional tooling can command a significant premium.
HOW MUCH DOES A USED OKUMA MB-5000H – 2015 COST?
The market value of a used OKUMA MB-5000H – 2015 depends on spindle hours, machine condition, tooling, pallet configuration, coolant options, and maintenance history.
| USED OKUMA MB-5000H – 2015 PRICE RANGE | ESTIMATED COST |
|---|---|
| High Hours / Basic Configuration | $70,000 – $85,000 |
| Functional Production Machine | $85,000 – $105,000 |
| Good Condition / Production Ready | $105,000 – $125,000 |
| Excellent / Well Equipped | $125,000 – $145,000 |
| Low Hours / Fully Equipped | $145,000 – $165,000+ |
For a 2015 OKUMA MB-5000H in good working condition, a realistic market value is approximately $100,000–$135,000 USD.
For your inventory listing, a recommended asking-price range is $115,000–$145,000 USD for a clean machine equipped with a dual-pallet system, 32-tool ATC, 12,000 RPM spindle, chip conveyor, high-pressure coolant, and tooling package.
Best estimated listing value: $115,000–$145,000 USD.
Related Products
-
OKUMA - LB3000 EX II
VIEW MACHINE -
OKUMA - Genos M560-V
VIEW MACHINE -
OKUMA - MULTUS B250II
VIEW MACHINE -
OKUMA - LB3000 EX II
VIEW MACHINE