USED HAAS TM1 – 2007

The HAAS TM1 – 2007 is a CNC toolroom vertical machining center designed for job shops, prototype work, tooling, maintenance, education, and low-volume production. The TM1 combines the flexibility of a toolroom mill with Haas CNC control, providing a relatively compact machine platform while retaining the accuracy and repeatability of CNC machining.

The 2007 TM1 configuration provides approximately 30 inches of X-axis travel, 12 inches of Y-axis travel, and 16 inches of Z-axis travel. It uses a 40-taper spindle with 7.5 HP and up to 4,000 RPM, making it suitable for general-purpose milling, drilling, tapping, boring, and profiling. Used-machine listings for 2007 TM1 machines confirm this 30 x 12 x 16-inch travel configuration, 7.5 HP spindle, and 4,000 RPM speed.

Unlike the TM1P, the standard TM1 is primarily intended around manual tool changes, although individual machines can be equipped with optional tool-changing equipment. Haas describes the TM series as affordable, easy-to-use CNC toolroom mills with conversational programming and 40-taper tooling.

---

HAAS TM1 – 2007 – AXIS

Specification	Details
Machine Type	CNC Toolroom Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	30″ / 762 mm
Y-Axis Travel	12″ / 305 mm
Z-Axis Travel	16″ / 406 mm
CNC Interpolation	3-Axis
4th-Axis Capability	Optional
Rotary Integration	Available
Rigid Tapping	Available
Spindle Orientation	Configuration Dependent

---

HAAS TM1 – 2007 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	30″ / 762 mm
Y-Axis Travel	12″ / 305 mm
Z-Axis Travel	16″ / 406 mm
Work Envelope	30″ x 12″ x 16″
Spindle Nose to Table Maximum	Approx. 20″ / 508 mm
Spindle Nose to Table Minimum	Approx. 4″ / 102 mm
Table Length	47.75″ / 1,213 mm
Table Width	10.5″ / 267 mm
Maximum Table Load	Approx. 350 lbs / 159 kg

The 30-inch X-axis travel is useful for longer plates, fixtures, brackets, and tooling components while the 12-inch Y-axis travel keeps the TM1 compact.

---

HAAS TM1 – 2007 – CAPACITY / TABLE

Specification	Details
Table Length	47.75″ / 1,213 mm
Table Width	10.5″ / 267 mm
T-Slot Width	Approx. 0.630″
T-Slot Center Distance	4″ / 102 mm
Number of Standard T-Slots	3
Maximum Table Load	Approx. 350 lbs / 159 kg
Workholding	Vise / Fixture / Rotary
4th-Axis Integration	Optional
Table Type	Fixed T-Slot

---

HAAS TM1 – 2007 – SPINDLE

Specification	Details
Spindle Type	Direct-Speed Belt Drive
Spindle Taper	CT 40 / BT40
Maximum Spindle Speed	4,000 RPM
Spindle Motor	7.5 HP / 5.6 kW
Maximum Torque	Approx. 33 ft-lb @ 1,200 RPM
Drive System	Belt Drive
Bearing Lubrication	Grease Packed
Spindle Cooling	Air Cooled
Spindle Orientation	Configuration Dependent
Tool Retention	Manual / Configuration Dependent

The 7.5 HP, 4,000 RPM, 40-taper spindle is well suited to general-purpose machining. Haas’ published TM specifications identify the spindle as 7.5 HP, 4,000 RPM, 40 taper, with 33 ft-lb maximum torque at 1,200 RPM.

---

HAAS TM1 – 2007 – TOOLING

Specification	Details
Standard Tool Changer	None
Tool Change	Manual
Tool Taper	CT 40 / BT40
Tool Capacity	Operator Dependent
Automatic Tool Change	Optional / Configuration Dependent
Tool Management	CNC Offset Management
Toolholding	40-Taper Tooling
Production Style	Toolroom / Prototype / Low Volume

The TM1 is differentiated from the TM1P by its simpler toolroom configuration. The TM1P is the model with the standard 10-tool carousel, while the TM1 can be configured with different tooling arrangements.

---

HAAS TM1 – 2007 – CONTROL SYSTEM

Specification	Details
CNC Control	Haas CNC Control
Programming	G-Code / Conversational
Conversational Programming	Yes
Work Offset Management	Yes
Tool Offset Management	Yes
Rigid Tapping	Available
User-Definable Macros	Configuration Dependent
USB	Configuration Dependent
Ethernet	Configuration Dependent
Rotary Programming	Available

The Haas CNC system allows the TM1 to be used by both experienced CNC programmers and operators who prefer conversational programming. Haas specifically promotes the TM series as easy to learn and operate, even without extensive G-code experience.

---

HAAS TM1 – 2007 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	200 IPM / 5.1 m/min
Y-Axis Rapid Traverse	200 IPM / 5.1 m/min
Z-Axis Rapid Traverse	200 IPM / 5.1 m/min
Maximum Cutting Feedrate	200 IPM / 5.1 m/min
X-Axis Maximum Thrust	2,000 lbf / 8,896 N
Y-Axis Maximum Thrust	2,000 lbf / 8,896 N
Z-Axis Maximum Thrust	2,000 lbf / 8,896 N
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes

Haas’ published TM1 specifications list 200 IPM rapid traverse and maximum cutting feedrate for all three axes.

---

HAAS TM1 – 2007 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Available
Coolant Pump	Available
Coolant Tank	Configuration Dependent
Programmable Coolant	Available
Chip Auger	Optional
Chip Conveyor	Configuration Dependent
Air Blast	Available
Through-Spindle Coolant	Optional
Coolant Filtration	Configuration Dependent
Mist Collector	Optional

Coolant and chip-management equipment can vary substantially between individual used TM1 machines, so the actual 2007 machine should be inspected to determine which options are installed.

---

HAAS TM1 – 2007 – AUTOMATION / PROBING

Specification	Details
Automatic Tool Changer	Configuration Dependent
Work Probe	Optional
Tool Probe	Optional
Wireless Probing	Configuration Dependent
4th-Axis Drive	Optional
4th-Axis Wiring	Optional
Rigid Tapping	Available
Conversational Programming	Yes
Rotary Table Integration	Available
Manual Tool Change	Standard Configuration

The TM1 can be used with rotary equipment for expanded machining capability. Haas notes that the TM series can support available 4th- and 5th-axis functionality depending on configuration.

---

HAAS TM1 – 2007 – POWER REQUIREMENTS

Specification	Details
Spindle Motor	7.5 HP / 5.6 kW
Single-Phase Input	220 VAC
Single-Phase Full Load	Approx. 40 A
Three-Phase Low Voltage	220 VAC
Three-Phase High Voltage	440 VAC
Electrical Service	Single- or Three-Phase
Shop Air	Required
Air Requirement	4 SCFM @ 100 PSI
Minimum Air Pressure	80 PSI

The current Haas TM1 specification lists 220 VAC single-phase and 220/440 VAC three-phase configurations, with approximately 4 SCFM at 100 PSI compressed air requirement. Exact electrical requirements should be verified from the 2007 machine’s serial-number-specific documentation.

---

HAAS TM1 – 2007 – DIMENSIONS

Specification	Details
Table Length	47.75″ / 1,213 mm
Table Width	10.5″ / 267 mm
Approximate Machine Weight	4,000 lbs / 1,814 kg
Floor Space	Compact Toolroom Configuration
Installation	Industrial
Rigging	Required
Shipping Dimensions	Configuration Dependent

A used 2007 TM1 listing reports approximately 4,000 lbs machine weight, while actual shipping dimensions vary depending on enclosure, coolant equipment, and other options.

---

HAAS TM1 – 2007 – GENERAL INFORMATION

Specification	Details
Manufacturer	Haas
Model	TM1
Year	2007
Machine Category	Vertical Machining Center
Machine Type	CNC Toolroom Mill
Axis Configuration	3-Axis
X-Axis Travel	30″
Y-Axis Travel	12″
Z-Axis Travel	16″
Table Size	47.75″ x 10.5″
Spindle Speed	4,000 RPM
Spindle Power	7.5 HP
Spindle Taper	CT 40 / BT40
Maximum Torque	Approx. 33 ft-lb
Maximum Feedrate	200 IPM
CNC Control	Haas CNC
4th-Axis Capability	Optional
Coolant	Configuration Dependent
Machine Weight	Approx. 4,000 lbs

---

INDUSTRIES THAT USE HAAS TM1

The HAAS TM1 is suitable for:

• General machine shops
• Aerospace
• Automotive
• Defense
• Tool and die
• Mold manufacturing
• Prototype manufacturing
• Maintenance and repair
• Educational facilities
• Industrial machinery
• Contract manufacturing
• Precision engineering
• Small-batch production

---

TYPICAL PARTS HAAS TM1 CAN PRODUCE

The TM1 can produce:

• Brackets
• Mounting plates
• Fixtures
• Jigs
• Housings
• Flanges
• Tooling components
• Prototype parts
• Machine components
• Automotive components
• Aerospace components
• Industrial brackets
• Repair components
• Custom production parts

Typical operations include face milling, pocketing, contouring, drilling, boring, tapping, reaming, slotting, and 3-axis profiling.

---

WHY CHOOSE HAAS TM1

The main advantage of the HAAS TM1 is its combination of a 30 x 12 x 16-inch work envelope, 40-taper spindle, 7.5 HP motor, and relatively compact footprint. It offers considerably more CNC capability than a conventional manual toolroom mill while remaining relatively straightforward to operate.

The 40-taper spindle provides useful rigidity for machining steel, aluminum, cast iron, and other common materials. The 4,000 RPM spindle is well suited to general-purpose cutting rather than high-speed machining applications.

The TM1 is especially attractive for prototype and maintenance work because jobs can be set up quickly and the Haas control provides conversational programming as well as standard CNC programming.

---

WHY BUY USED HAAS TM1 – 2007

A used 2007 HAAS TM1 can be a cost-effective option for a shop looking to add CNC milling capability without the investment required for a newer production VMC.

Its 30-inch X-axis travel provides useful capacity for long plates, brackets, fixtures, and tooling components. The 40-taper spindle and 7.5 HP motor provide sufficient cutting capability for many general machining applications.

The machine’s age means that condition is more important than the year alone. Buyers should inspect the spindle, ballscrews, linear guides, table, way covers, drawbar, control electronics, lubrication system, coolant system, and electrical cabinet.

Special attention should be given to axis backlash, spindle runout, spindle noise, positioning accuracy, servo alarms, control operation, and evidence of previous crashes.

Hours can make a major difference in value. One currently advertised 2007 TM1 reportedly has only 143 spindle hours, while another used 2007 machine is listed at $18,500, showing how dramatically condition and usage can influence asking prices.

---

HOW MUCH DOES A USED HAAS TM1 – 2007 COST?

The value of a 2007 HAAS TM1 depends heavily on machine hours, spindle condition, axis accuracy, control condition, tooling, coolant equipment, enclosure, and any additional rotary equipment.

Current used-market examples provide a useful reference. One 2007 HAAS TM1 is advertised for $18,500, while another 2007 machine is listed with only 143 spindle hours and equipment including Haas CNC control, USB, intuitive programming, and handwheels.

For a typical operational machine, I would use the following practical pricing range:

USED HAAS TM1 – 2007 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$11,000 – $14,000
Functional Used Machine	$14,000 – $17,000
Good Condition / Production Ready	$17,000 – $20,000
Excellent / Well Equipped	$20,000 – $23,000
Very Low Hours / Premium Configuration	$23,000+

For a 2007 HAAS TM1 in good working condition, I would estimate approximately $15,000–$20,000 USD.

For your inventory listing, I would recommend a practical asking-price range of $17,000–$20,000 USD for a clean, operational machine.

A very low-hour machine with excellent spindle condition, probing, rotary capability, coolant equipment, complete tooling, and a clean control system could potentially command $21,000–$24,000+.

A high-hour machine requiring repairs or showing significant backlash, spindle wear, or control problems could fall closer to $10,000–$14,000.

Best estimated listing value: $17,000–$20,000 USD.