The 2010 Haas DT1 is a compact, high-speed CNC drill/tap machining center designed for rapid production, precision machining, and exceptional reliability. Built around a rigid cast-iron frame with linear guideways and a BT30 inline direct-drive spindle, the DT1 delivers fast acceleration, short cycle times, and excellent accuracy for aluminum, steel, stainless steel, and engineering plastics. Featuring a 20+1 side-mount automatic tool changer, rapid axis speeds, and the proven Haas CNC control, the 2010 DT1 is ideal for medical, electronics, aerospace, automotive, mold making, and high-volume production applications.
The machine provides 20 in (508 mm) of X-axis travel, 16 in (406 mm) of Y-axis travel, and 15.5 in (394 mm) of Z-axis travel. It is equipped with a 10,000 RPM inline direct-drive BT30 spindle producing 15 HP (11.2 kW) and a 20+1 side-mount automatic tool changer capable of extremely fast tool changes. With rapid traverse rates of 2,400 IPM (61 m/min), rigid tapping, Ethernet connectivity, and a compact footprint, the 2010 Haas DT1 is an excellent solution for shops focused on productivity and repeatability.
HAAS DT1 2010 – AXIS
Specification
Details
X-Axis Travel
20 in (508 mm)
Y-Axis Travel
16 in (406 mm)
Z-Axis Travel
15.5 in (394 mm)
Axis Configuration
3-Axis Vertical Drill/Tap Machining Center
Rapid Traverse (X/Y/Z)
2,400 IPM (61 m/min)
Guideway Type
Linear Guideways
HAAS DT1 2010 – TABLE
Specification
Details
Table Size
26 × 15 in (660 × 381 mm)
Maximum Table Load
500 lbs (227 kg)
T-Slots
3
T-Slot Width
0.625 in (16 mm)
HAAS DT1 2010 – SPINDLE
Specification
Details
Maximum Spindle Speed
10,000 RPM
Spindle Power
15 HP (11.2 kW)
Maximum Torque
46 ft-lb (62 Nm)
Spindle Taper
BT30
Drive Type
Inline Direct Drive
Spindle Cooling
Air Cooled
HAAS DT1 2010 – TOOL CHANGER
Specification
Details
Tool Capacity
20 + 1 Tools
Tool Changer Type
Side-Mount Tool Changer
Tool-to-Tool Time
1.75 sec
Chip-to-Chip Time
2.0 sec
Maximum Tool Weight
5.5 lbs (2.5 kg)
Maximum Tool Length
7 in (178 mm)
HAAS DT1 2010 – CONTROL SYSTEM
Specification
Details
CNC Control
Haas CNC Control
Programming
ISO G-Code
Ethernet
Standard
USB
Standard
Rigid Tapping
Standard
High-Speed Machining
Optional
HAAS DT1 2010 – COOLANT SYSTEM
Specification
Details
Flood Coolant
Standard
Coolant Tank Capacity
55 gal (208 L)
Through-Spindle Coolant
Optional
Chip Auger
Optional
Programmable Coolant Nozzle
Optional
HAAS DT1 2010 – POWER REQUIREMENTS
Specification
Details
Electrical Supply
220V / 440V, 3-Phase
Connected Load
40A @ 220V
Air Requirement
4 SCFM @ 100 PSI
HAAS DT1 2010 – DIMENSIONS
Specification
Details
Machine Length
100 in (2,540 mm)
Machine Width
80 in (2,032 mm)
Machine Height
98 in (2,489 mm)
Machine Weight
5,150 lbs (2,336 kg)
HAAS DT1 2010 – GENERAL INFORMATION
Specification
Details
Manufacturer
Haas Automation
Model
DT1
Year
2010
Machine Type
CNC Drill/Tap Machining Center
Condition
Used
Country of Origin
USA
WHY BUY USED HAAS DT1 2010
Purchasing a used Haas DT1 2010 is an excellent way to acquire a fast, compact production machine at a fraction of the cost of a new machine. Its BT30 spindle, rapid tool changes, and high-speed axis movements make it ideal for shops producing small precision components in medium- to high-volume production. Many used machines are equipped with valuable factory options such as through-spindle coolant, probing systems, chip augers, programmable coolant nozzles, and 4th-axis readiness.
HOW MUCH DOES A USED HAAS DT1 2010 COST?
The value of a used Haas DT1 2010 depends on spindle hours, maintenance history, tooling, machine condition, and installed options.
Most used Haas DT1 2010 machines typically sell between $20,000 and $40,000, depending on condition, spindle hours, and included accessories. Machines equipped with probing systems, through-spindle coolant, chip management systems, and documented maintenance histories generally command higher resale values.
Before purchasing, buyers should inspect the spindle, linear guideways, ballscrews, tool changer, lubrication system, coolant system, and machine geometry to ensure reliable long-term performance.
INDUSTRIES THAT USE HAAS DT1 2010
Aerospace Manufacturing
Medical Device Manufacturing
Electronics
Automotive
Mold & Die
Precision Engineering
Tool & Fixture Manufacturing
Contract Manufacturing
Prototype Development
General CNC Machine Shops
TYPICAL PARTS HAAS DT1 2010 CAN PRODUCE
Medical Components
Aerospace Brackets
Electronic Housings
Mold Inserts
Precision Fixtures
Aluminum Components
Valve Bodies
Tooling Plates
Prototype Parts
Small Mechanical Components
WHY CHOOSE HAAS DT1 2010
The Haas DT1 2010 is a proven high-speed drill/tap machining center that delivers excellent productivity, reliability, and machining accuracy. Its 10,000 RPM BT30 inline spindle, 20+1 side-mount tool changer, rapid traverse rates, and compact footprint make it an outstanding solution for manufacturers producing precision components.
Whether machining medical devices, aerospace components, electronics, tooling, or production parts, the Haas DT1 2010 offers fast cycle times, dependable performance, low operating costs, and strong resale value, making it one of the most popular used drill/tap machining centers available.
