USED HAAS UMC750SS – 2018
The 2018 HAAS UMC750SS is a 5-axis CNC universal machining center designed for manufacturers that need high-speed machining, multi-sided access, and reduced setup requirements. The UMC750SS combines a vertical machining center platform with an integrated dual-axis trunnion table, allowing manufacturers to perform 3+2 machining as well as simultaneous 5-axis machining. The documented 2018 configuration provides 30 inches of X-axis travel, 20 inches of Y-axis travel, and 20 inches of Z-axis travel, giving the machine a substantial working envelope for medium-sized components.
The “SS” designation identifies the Super Speed version of the UMC750. Compared with the standard UMC750, the UMC750SS is equipped with a higher-speed spindle and is designed to provide faster machining cycles. Documented 2018 machines are equipped with a 15,000 RPM inline direct-drive spindle rated at 30 HP, providing the spindle speed required for aluminum, stainless steel, plastics, brass, and many other materials.
The integrated trunnion is one of the most important features of the UMC750SS. Its B axis tilts from approximately +120 degrees to -35 degrees, while the C axis provides 360 degrees of rotation. This allows the cutting tool to approach multiple faces and complex surfaces from different orientations without repeatedly removing and repositioning the workpiece.
The UMC750SS uses a 19.7-inch diameter platter with a documented maximum workpiece load of approximately 660 pounds. The platter incorporates T-slots and a precision pilot bore for flexible workholding and fixture positioning. This makes the machine suitable for vises, custom fixtures, tombstone-style workholding arrangements, and other 5-axis production setups.
Tool management is handled by a side-mount automatic tool changer. The documented 2018 machine has a 40-position tool changer, while Haas specifications for the UMC750SS family also identify 30+1 and 40+1 configurations depending on production version and equipment. The 2018 used-machine examples specifically show a 40-position ATC.
The UMC750SS also benefits from Haas’ Next Generation CNC control environment. Documented 2018 machines include features such as Dynamic Work Offsets, Tool Center Point Control, rigid tapping, high-speed machining, macros, Ethernet, USB, wireless networking, and Renishaw Wireless Intuitive Probing System. These functions are particularly valuable when the machine is used for complex multi-axis components.
Another important production feature is through-spindle coolant. A documented 2018 UMC750SS includes through-spindle coolant, programmable coolant, a chip conveyor, and an auxiliary coolant filter. These systems can improve tool life, chip evacuation, and cutting performance during deep-hole drilling, pocketing, and high-material-removal applications.
The UMC750SS is particularly well suited to aerospace, defense, medical, automotive, energy, mold and die, precision engineering, and general contract manufacturing. Its ability to machine multiple faces in one setup can reduce fixture changes, improve positional accuracy between features, and shorten overall production time.
For manufacturers purchasing a used 5-axis machining center, the 2018 HAAS UMC750SS provides an attractive combination of high spindle speed, 5-axis capability, 30 × 20 × 20 inch travels, 40-tool capacity, probing, through-spindle coolant, and Haas CNC control.
HAAS UMC750SS – AXIS
The UMC750SS is a 5-axis CNC universal machining center. The three linear axes are X, Y, and Z, while the integrated trunnion provides B-axis tilting and C-axis rotation.
The X axis provides 30 inches of travel, while both Y and Z provide 20 inches. The B axis provides approximately +120 to -35 degrees of tilt, and the C axis provides continuous 360-degree rotation.
| Specification | Details |
|---|---|
| Machine Type | 5-Axis Universal Machining Center |
| Axis Configuration | 5 Axis |
| Linear Axes | X / Y / Z |
| Rotary Axes | B / C |
| X Axis Travel | 30 inches / 762 mm |
| Y Axis Travel | 20 inches / 508 mm |
| Z Axis Travel | 20 inches / 508 mm |
| B Axis | Tilt |
| B Axis Travel | +120° to -35° |
| C Axis | Rotary |
| C Axis Travel | 360° |
| Simultaneous 5-Axis | Yes |
| 3+2 Machining | Yes |
| Tool Center Point Control | Yes |
| Dynamic Work Offsets | Yes |
The integrated B and C axes allow the UMC750SS to orient a workpiece toward the cutting tool while maintaining a single primary setup. This is particularly useful for parts with angled holes, compound surfaces, multiple faces, and complex 3D geometry.
HAAS UMC750SS – AXIS TRAVELS / WORK ENVELOPE
The UMC750SS provides a 30 × 20 × 20 inch XYZ travel envelope. Haas identifies approximately 4 inches minimum and 24 inches maximum spindle-nose-to-platter distance on the current UMC750SS specifications.
However, 5-axis work envelopes should not be evaluated solely from the linear travels. The physical size and shape of the workpiece, fixture height, tool length, B-axis angle, C-axis position, and collision-clearance requirements can all reduce the practical machining envelope. Haas specifically notes that the work envelope of a 5-axis machine is different from its simple axis-travel dimensions.
| Specification | Details |
|---|---|
| X Axis Travel | 30 inches / 762 mm |
| Y Axis Travel | 20 inches / 508 mm |
| Z Axis Travel | 20 inches / 508 mm |
| Minimum Spindle Nose to Platter | Approximately 4 inches |
| Maximum Spindle Nose to Platter | Approximately 24 inches |
| B Axis Travel | +120° to -35° |
| C Axis Travel | 360° |
| Maximum Part Swing | Approximately 27 inches / 686 mm |
| Work Envelope | 5-Axis / Fixture Dependent |
| Maximum Part Height | Configuration Dependent |
| Maximum Part Diameter | Configuration Dependent |
| Tool Clearance | Tool and Fixture Dependent |
| Simultaneous Machining | Yes |
| 3+2 Machining | Yes |
HAAS UMC750SS – CAPACITY / TABLE
The UMC750SS uses an integrated high-speed trunnion table with a 19.7-inch / 500 mm diameter platter. The documented maximum load is approximately 660 pounds / 300 kg.
The platter incorporates standard T-slots and a precision pilot bore. This provides flexibility when installing vises, fixtures, rotary workholding, custom tooling plates, and other workholding equipment.
| Specification | Details |
|---|---|
| Platter Diameter | 19.7 inches / 500 mm |
| Maximum Platter Load | 660 lb / approximately 300 kg |
| Platter Type | Integrated Trunnion |
| T-Slots | Yes |
| Standard T-Slots | 7 documented |
| T-Slot Width | Approximately 0.626–0.630 inch |
| T-Slot Center Distance | Approximately 2.48 inches |
| Precision Pilot Bore | Yes |
| B Axis | +120° to -35° |
| C Axis | 360° |
| Workholding | Fixture / Vise / Custom |
| Maximum Part Weight | Approximately 660 lb |
| Maximum Part Size | Configuration Dependent |
| Pallet Pool Compatibility | Configuration Dependent |
The 660-pound capacity is a substantial advantage for a machine in this class, although the practical allowable weight can be affected by the position of the workpiece on the platter and the orientation used during 5-axis machining.
HAAS UMC750SS – SPINDLE
The 2018 UMC750SS is documented with a 15,000 RPM inline direct-drive spindle and a 30 HP spindle motor. The spindle uses a CAT40 configuration on the documented 2018 machine, while the UMC750SS family can also be configured with BT40 or HSK-A63 tooling depending on equipment.
The high-speed spindle is particularly useful for smaller cutting tools, aluminum machining, high-speed finishing, plastics, and other applications where elevated spindle speeds can improve productivity and surface finish.
| Specification | Details |
|---|---|
| Spindle Orientation | Vertical |
| Spindle Type | Inline Direct Drive |
| Spindle Speed | 15,000 RPM documented |
| Spindle Motor | 30 HP / 22.4 kW |
| Spindle Taper | CAT40 documented |
| Other Taper Options | BT40 / HSK-A63 configuration dependent |
| Maximum Torque | Approximately 90 ft-lb |
| Torque Speed | Approximately 2,000 RPM |
| Spindle Cooling | Liquid Cooled |
| Bearing Lubrication | Air / Oil Injection |
| Spindle Orientation | Yes |
| Rigid Tapping | Yes |
| High-Speed Machining | Yes |
| Through-Spindle Coolant | Equipped on documented machine |
| Tool Center Point Control | Yes |
The combination of 30 HP and 15,000 RPM provides the UMC750SS with considerable flexibility. Heavy roughing can utilize the available spindle power, while smaller cutters can benefit from the higher speed range.
HAAS UMC750SS – TOOL CHANGER
The documented 2018 UMC750SS uses a 40-position side-mount automatic tool changer. Haas documentation identifies the UMC750SS family with high-capacity side-mount tool-changing configurations, with the historical specification sheet showing a 40+1 tool changer.
The additional tool capacity is useful for 5-axis work because complex components can require many different cutters for roughing, finishing, drilling, chamfering, threading, and angled-feature machining.
| Specification | Details |
|---|---|
| Tool Changer | Side-Mount Automatic Tool Changer |
| Documented Capacity | 40 Tools |
| Historical Capacity | 40+1 |
| Tool Taper | CAT40 documented |
| Tool Change | Automatic |
| Maximum Tool Diameter, Full | Approximately 2.5 inches / 64 mm |
| Maximum Tool Diameter, Adjacent Empty | Approximately 5 inches / 127 mm |
| Maximum Tool Length | Approximately 12 inches / 305 mm |
| Maximum Tool Weight | Approximately 12 lb / 5.4 kg |
| Tool-to-Tool Time | Approximately 1.8 sec average |
| Chip-to-Chip Time | Approximately 2.4 sec average |
| Tool Management | CNC Controlled |
| Tool Presetter | Configuration Dependent |
| Tool Life Management | Yes |
A 40-position tool changer gives the machine sufficient capacity for many complex production programs without repeatedly stopping the machine to replace tools.
HAAS UMC750SS – CONTROL SYSTEM
The 2018 UMC750SS uses the Haas Next Generation CNC control. Documented machines include features designed specifically for 5-axis machining, including Dynamic Work Offsets (DWO) and Tool Center Point Control (TCPC).
These functions allow the control to compensate for changes in workpiece orientation during multi-axis machining, making them particularly valuable when machining complex parts on the integrated trunnion.
| Specification | Details |
|---|---|
| CNC Control | Haas Next Generation Control |
| Control Type | CNC |
| 5-Axis Control | Yes |
| Dynamic Work Offsets | DWO |
| Tool Center Point Control | TCPC |
| Rigid Tapping | Yes |
| High-Speed Machining | Yes |
| Macros | Yes |
| Spindle Orientation | Yes |
| Visual Programming System | VPS Editing |
| Coordinate Rotation | Yes |
| Coordinate Scaling | Yes |
| Program Memory | 1 GB documented |
| Ethernet | Yes |
| USB | Yes |
| Wireless Networking | Documented |
| Media Display | Yes |
| Remote Jog Handle | Documented |
| HaasConnect | Documented |
| Probing Integration | Yes |
The documented 2018 machine includes a Renishaw Wireless Intuitive Probing System. Probing can improve setup efficiency by allowing automated workpiece measurement and tool-setting routines.
HAAS UMC750SS – COOLANT / DUST / WATER MANAGEMENT
The UMC750SS is designed for wet machining and can be equipped with substantial coolant and chip-management equipment. A documented 2018 machine includes through-spindle coolant, programmable coolant, an auxiliary coolant filter, an integrated coolant tank, and a Hennig chip conveyor.
The current Haas specifications identify a 55-gallon / 208-liter coolant capacity and approximately 4 SCFM at 100 PSI air requirements.
| Specification | Details |
|---|---|
| Coolant System | Yes |
| Coolant Capacity | 55 gal / 208 L |
| Through-Spindle Coolant | Documented |
| Through-Spindle Coolant Pressure | 300 PSI documented on 2018 listing |
| Programmable Coolant Nozzle | Yes |
| Auxiliary Coolant Filter | Documented |
| Integrated Coolant Tank | Yes |
| Chip Conveyor | Hennig documented |
| Chip Removal | Automatic |
| Flood Coolant | Yes |
| Coolant Filtration | Configuration Dependent |
| Air Blast | Through-Tool Air Blast documented |
| Coolant Management | Production Oriented |
Through-spindle coolant is particularly useful for deep drilling and machining operations where conventional flood coolant may not effectively reach the cutting edge.
HAAS UMC750SS – POWER REQUIREMENTS
The UMC750SS uses a 30 HP spindle motor and is designed around 3-phase electrical service. Haas’ current specification identifies 220 VAC 3-phase at 70 amps for the low-voltage configuration and 440 VAC 3-phase at 35 amps with the optional high-voltage transformer.
For an individual 2018 machine, the electrical nameplate should be checked because options and installed equipment can affect total connected load.
| Specification | Details |
|---|---|
| Spindle Motor | 30 HP |
| Spindle Power | 22.4 kW |
| Input Voltage | 220 VAC 3 Phase standard design |
| High-Voltage Option | 380–480 VAC via optional transformer |
| Low-Voltage Full Load | Approximately 70 A |
| High-Voltage Full Load | Approximately 35 A |
| Electrical Phase | 3 Phase |
| Spindle Drive | Vector / Direct Drive System |
| Coolant System | Electrically Powered |
| Chip Conveyor | Electrically Powered |
| Transformer | Configuration Dependent |
| Total Connected Load | Verify Individual Machine |
Haas notes that high-performance spindle options can have different power requirements, so the individual machine’s electrical documentation should be used when preparing the installation site.
HAAS UMC750SS – DIMENSIONS
The UMC750SS is a substantial machine, with documented 2018 machines weighing approximately 18,000 pounds. Shipping dimensions vary according to tool changer and chip-conveyor configuration.
| Specification | Details |
|---|---|
| Machine Weight | Approximately 18,000 lb documented |
| Shipping Weight | Configuration Dependent |
| Shipping Length | Configuration Dependent |
| Shipping Width | Configuration Dependent |
| Shipping Height | Configuration Dependent |
| Service Clearance | Required |
| Chip Conveyor Space | Additional Space Required |
| Electrical Access | Required |
| Air Connection | Required |
| Coolant Access | Required |
| Installation Floor | Suitable Industrial Floor Required |
| Rigging | Required |
Haas’ current shipping specification lists approximately 168 × 92.5 × 110 inches for the domestic pallet configuration, with dimensions increasing when larger tool changers or conveyors are included.
HAAS UMC750SS – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | HAAS |
| Model | UMC750SS |
| Year | 2018 |
| Machine Category | Universal Machining Centers |
| Machine Type | 5-Axis CNC Universal Machining Center |
| Axis Configuration | 5 Axis |
| X Axis Travel | 30 inches / 762 mm |
| Y Axis Travel | 20 inches / 508 mm |
| Z Axis Travel | 20 inches / 508 mm |
| B Axis | +120° to -35° |
| C Axis | 360° |
| Platter Diameter | 19.7 inches / 500 mm |
| Maximum Platter Load | 660 lb / approximately 300 kg |
| Spindle Speed | 15,000 RPM |
| Spindle Motor | 30 HP |
| Spindle Taper | CAT40 documented |
| Tool Changer | 40 Position documented |
| CNC Control | Haas Next Generation |
| Probing | Renishaw WIPS |
| Through-Spindle Coolant | Yes |
| Chip Conveyor | Yes |
| Programmable Coolant | Yes |
| Dynamic Work Offsets | Yes |
| Tool Center Point Control | Yes |
| Rigid Tapping | Yes |
| Machine Weight | Approximately 18,000 lb documented |
| Feed Cutting Time | 4,927 hours documented on one 2018 machine |
| Manufacture Date | November 2018 documented on one machine |
| Exact Equipment | Verify Individual Machine |
One documented 2018 UMC750SS was manufactured in November 2018 and had approximately 4,927 feed-cutting hours as of June 2023, illustrating why spindle, servo, and cutting-hour history should be evaluated on each individual used machine.
INDUSTRIES THAT USE HAAS UMC750SS
Aerospace Manufacturing
The UMC750SS is well suited to aerospace components that require machining on multiple faces or complex three-dimensional surfaces. Five-axis positioning can reduce the number of fixtures required and improve the positional relationship between features.
Defense Manufacturing
Defense manufacturers can use the machine for housings, brackets, structural components, fixtures, and complex precision parts. The Haas control’s DWO and TCPC capabilities are particularly useful for multi-axis machining.
Medical Manufacturing
Medical manufacturers can use the UMC750SS for orthopedic components, surgical instruments, housings, fixtures, and other precision parts. Its probing capability can help with repeatable setups and inspection routines.
Automotive Manufacturing
The machine can produce automotive components such as housings, brackets, wheel components, suspension-related parts, and complex prototype or production components.
Energy Manufacturing
The UMC750SS can machine components used in turbines, pumps, compressors, generators, and other energy equipment where multiple faces and complex geometries must be machined accurately.
Mold and Die Manufacturing
Five-axis machining is valuable for molds, dies, electrodes, inserts, and complex contoured surfaces. Tilting the workpiece can provide better tool orientation and reduce the need for long, flexible cutters.
General Precision Manufacturing
Job shops can use the UMC750SS for a broad range of complex components. Its 5-axis capability allows a shop to accept work that would otherwise require several setups or multiple machines.
Contract Manufacturing
Contract manufacturers benefit from the ability to combine multiple machining operations into one primary setup. This can reduce setup labor and improve consistency between machined features.
TYPICAL PARTS HAAS UMC750SS CAN PRODUCE
| Part Type | Typical Operations |
|---|---|
| Aerospace Brackets | 5-Axis Milling, Drilling |
| Turbine Components | 5-Axis Contouring |
| Impellers | Simultaneous 5-Axis Machining |
| Medical Components | Complex Milling, Drilling |
| Surgical Instruments | Profiling, Contouring |
| Automotive Housings | Milling, Drilling, Tapping |
| Engine Components | Multi-Sided Machining |
| Pump Components | Pocketing, Drilling |
| Valve Components | Multi-Face Milling |
| Compressor Parts | 5-Axis Contouring |
| Mold Components | 3D Contouring |
| Die Components | Surface Milling |
| Aerospace Fixtures | Multi-Sided Milling |
| Defense Components | Complex Milling |
| Machine Components | 3+2 Machining |
| Precision Brackets | 5-Axis Milling |
| Custom Fixtures | Drilling, Pocketing |
| Manifolds | Multi-Face Drilling |
| Prototypes | Multi-Axis Machining |
| Complex Production Parts | Simultaneous 5-Axis |
WHY CHOOSE HAAS UMC750SS
The biggest advantage of the UMC750SS is its integrated 5-axis capability. Instead of removing and repositioning a component for every face, the machine can rotate and tilt the workpiece to access multiple surfaces.
The 30 × 20 × 20 inch travels provide a substantial working envelope for medium-sized components. This makes the UMC750SS suitable for significantly more than small 5-axis prototype work.
The 15,000 RPM spindle is another major advantage over the standard UMC750. The higher speed is useful for small cutters, high-speed finishing, aluminum, plastics, brass, and other applications where elevated spindle speed can improve productivity.
The 30 HP spindle motor also provides sufficient power for substantial material removal. This gives the machine a useful combination of high-speed machining capability and general-purpose cutting performance.
The integrated B/C trunnion provides +120 to -35 degrees of tilt and 360 degrees of rotation. This gives manufacturers substantial flexibility when machining angled surfaces, compound features, holes, pockets, and complex contours.
The 40-position tool changer allows complex programs to run with a broad selection of cutters already loaded. This can be especially valuable when machining components requiring roughing, semi-finishing, finishing, drilling, tapping, chamfering, and specialty tools.
The Renishaw wireless probing system can significantly improve setup efficiency. Automated probing can establish workpiece locations, verify dimensions, and help reduce manual setup operations.
The combination of DWO and TCPC is another major reason to choose the UMC750SS. These functions are designed to simplify and improve multi-axis machining by allowing the control to account for changes in workpiece orientation.
Finally, the UMC750SS provides a strong balance between capability and machine complexity. A manufacturer can gain true 5-axis machining, high-speed spindle performance, automatic tool changing, probing, and through-spindle coolant without moving into the much larger footprint and investment associated with some high-end aerospace machining centers.
WHY BUY USED HAAS UMC750SS
A used 2018 HAAS UMC750SS can provide access to modern 5-axis machining capability at a significantly lower acquisition cost than purchasing a comparable new machine.
The machine’s 15,000 RPM spindle and 30 HP motor make it suitable for both high-speed finishing and demanding production work. The 40-tool ATC further expands the types of jobs that can be completed without manual tool changes.
The integrated trunnion is particularly valuable for shops transitioning from 3-axis machining to 5-axis production. Instead of purchasing several specialized fixtures, the machine can use B and C axis positioning to access multiple faces of a component.
A used UMC750SS can also provide substantial savings when it already includes expensive accessories. Documented 2018 machines have been equipped with through-spindle coolant, Renishaw probing, programmable coolant, chip conveyors, auxiliary coolant filtration, and other production features.
The Haas Next Generation control is another advantage for shops already operating Haas equipment. Familiar programming, controls, tooling, and service procedures can reduce the learning curve when adding another machine.
The relatively recent 2018 model year also makes these machines attractive compared with significantly older 5-axis equipment. However, age alone should not determine value. Actual spindle hours, feed hours, power-on hours, maintenance history, crash history, and axis accuracy should all be reviewed.
One documented 2018 UMC750SS shows more than 24,000 power-on hours but substantially fewer feed and spindle hours, demonstrating why buyers should examine the complete machine-hour history rather than relying only on the year.
The trunnion should receive particular attention during inspection. Buyers should verify B- and C-axis positioning, backlash, brake operation, rotary accuracy, encoder performance, and signs of crash damage.
The spindle should also be checked at multiple speeds and under cutting load. Bearing noise, temperature, vibration, taper condition, drawbar performance, and spindle orientation should all be evaluated before purchase.
HOW MUCH DOES A USED HAAS UMC750SS COST?
The asking price of a used 2018 HAAS UMC750SS depends heavily on machine hours, spindle condition, trunnion condition, CNC options, probing, coolant equipment, tool changer, chip conveyor, tooling, and overall maintenance history.
A current used-market listing for a 2018 HAAS UMC750SS identifies the machine as being in excellent condition and equipped with a 15,000 RPM spindle, 40-position ATC, Renishaw wireless probing, through-spindle coolant, programmable coolant, chip conveyor, Next Generation Haas control, DWO, TCPC, rigid tapping, Ethernet, USB, wireless networking, and other options.
Another documented 2018 UMC750SS manufactured in November 2018 has approximately 4,927 feed-cutting hours as of June 2023 and was used primarily for plastic, stainless steel, and brass machining.
The Used CNC Exchange listing for this specific model/year currently describes an indicative used-market range of approximately $95,000 to $185,000, depending on spindle hours, condition, installed options, tooling, automation, and overall configuration. This should be treated as a market estimate rather than a guaranteed sale price or appraisal.
| Used Machine Pricing Factor | Effect on Value |
|---|---|
| Machine Year | 2018 |
| Power-On Hours | Important |
| Feed-Cutting Hours | Major valuation factor |
| Spindle Hours | Major valuation factor |
| Spindle Condition | Major valuation factor |
| Trunnion Condition | Major valuation factor |
| B-Axis Accuracy | Major valuation factor |
| C-Axis Accuracy | Major valuation factor |
| Spindle Speed | 15,000 RPM documented |
| Spindle Motor | 30 HP |
| Tool Changer | 40 Position documented |
| Renishaw Probing | Adds production value |
| Through-Spindle Coolant | Adds production value |
| Chip Conveyor | Adds production value |
| Programmable Coolant | Adds capability |
| DWO / TCPC | Important 5-Axis Features |
| CNC Control | Haas Next Generation |
| Tooling Package | Can reduce startup cost |
| Maintenance History | Major valuation factor |
| Crash History | Major valuation factor |
| Current Asking Price | Configuration Dependent |
| Actual Sale Price | May differ from asking price |
A machine toward the lower end of the used-market range may have higher hours, fewer options, worn tooling, or require refurbishment. A premium example with low cutting hours, a healthy spindle, accurate trunnion, probing, through-spindle coolant, chip conveyor, extensive tooling, and documented maintenance can command substantially more.
The most important consideration when purchasing a used UMC750SS is therefore not simply the 2018 model year, but the condition and configuration of the individual machine.
A properly maintained 2018 HAAS UMC750SS remains a highly capable Universal Machining Center for manufacturers requiring 5-axis machining, high-speed cutting, multi-sided access, automatic tool changing, probing, and production-oriented coolant and chip management. Its combination of 30 × 20 × 20 inch travels, 15,000 RPM spindle, 30 HP motor, 40-tool ATC, 500 mm trunnion platter, and B/C-axis capability makes it particularly valuable for aerospace, defense, medical, automotive, mold, energy, and precision manufacturing applications.
Related Products
-
HAAS - VF9/50
VIEW MACHINE -
HAAS - ST45L
VIEW MACHINE -
HAAS - EC1600ZT5AX
VIEW MACHINE -
HAAS - DM1
VIEW MACHINE