USED HAAS TM2 – 2006

The HAAS TM2 – 2006 is a CNC toolroom vertical machining center designed for machine shops, maintenance departments, educational facilities, prototype work, tooling, and low-volume production. The TM2 combines the flexibility of a toolroom mill with Haas CNC control, allowing operators to machine components with greater repeatability and accuracy than a conventional manual mill.

The TM2 provides approximately 40 inches of X-axis travel, 16 inches of Y-axis travel, and 16 inches of Z-axis travel, giving the machine a substantial working envelope for its class. It features a 40-taper spindle with 7.5 HP and a maximum spindle speed of approximately 4,000 RPM. The machine uses manual tool changes rather than the automatic tool changer found on the TM2P, making the TM2 a relatively simple and economical CNC machining solution.

The long table provides useful capacity for long plates, fixtures, brackets, tooling components, and other workpieces. The Haas CNC control also supports conversational programming, making the machine accessible to operators who may not have extensive experience writing G-code.

---

HAAS TM2 – 2006 – AXIS

Specification	Details
Machine Type	CNC Toolroom Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	40″ / 1,016 mm
Y-Axis Travel	16″ / 406 mm
Z-Axis Travel	16″ / 406 mm
CNC Interpolation	3-Axis
4th-Axis Capability	Optional
Rotary Integration	Available
Rigid Tapping	Available
Spindle Orientation	Available

---

HAAS TM2 – 2006 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	40″ / 1,016 mm
Y-Axis Travel	16″ / 406 mm
Z-Axis Travel	16″ / 406 mm
Spindle Nose to Table Maximum	Approx. 20″ / 508 mm
Spindle Nose to Table Minimum	Approx. 4″ / 102 mm
Work Envelope	40″ x 16″ x 16″
Table Length	Approx. 57.8″ / 1,467 mm
Table Width	Approx. 10.5″ / 267 mm
Maximum Table Load	Approx. 350 lbs / 159 kg

The 40-inch X-axis travel gives the TM2 excellent capacity for a toolroom machine and allows it to handle longer components than many compact CNC mills.

---

HAAS TM2 – 2006 – CAPACITY / TABLE

Specification	Details
Table Length	Approx. 57.8″ / 1,467 mm
Table Width	Approx. 10.5″ / 267 mm
T-Slot Width	Approx. 0.626–0.630″
T-Slot Center Distance	Approx. 4″ / 102 mm
Number of Standard T-Slots	3
Maximum Table Load	Approx. 350 lbs / 159 kg
Workholding	Vise / Fixture / Rotary
4th-Axis Integration	Optional
Table Type	Fixed T-Slot

The long table is useful for holding long plates and fixtures, while the three T-slots provide flexible workholding options.

---

HAAS TM2 – 2006 – SPINDLE

Specification	Details
Spindle Type	Direct-Speed Belt Drive
Spindle Taper	40 Taper
Maximum Spindle Speed	Approx. 4,000 RPM
Spindle Motor	7.5 HP / 5.6 kW
Maximum Torque	Approx. 33 ft-lb
Drive System	Belt Drive
Spindle Cooling	Air Cooled
Bearing Lubrication	Grease Packed
Spindle Orientation	Available
Tool Retention	Manual

The 7.5 HP, 4,000 RPM, 40-taper spindle is suited to general-purpose machining, including steel, aluminum, cast iron, and other common manufacturing materials.

---

HAAS TM2 – 2006 – TOOLING

Specification	Details
Tool Changer	None
Tool Change	Manual
Tool Taper	40 Taper
Tool Capacity	Operator Dependent
Automatic Tool Change	No
Tool Management	CNC Offset Management
Toolholding	40-Taper Tooling
Production Style	Manual Tool Change
Tool Retention	Manual

The TM2 does not have a standard automatic tool changer. This makes it simpler than the TM2P and particularly suitable for applications where operators frequently perform manual tool changes.

---

HAAS TM2 – 2006 – CONTROL SYSTEM

Specification	Details
CNC Control	Haas CNC Control
Programming	G-Code / Conversational
Conversational Programming	Yes
Work Offset Management	Yes
Tool Offset Management	Yes
Rigid Tapping	Available
User-Definable Macros	Configuration Dependent
Ethernet	Configuration Dependent
USB	Configuration Dependent
Rotary Programming	Available

The Haas CNC control gives the TM2 the ability to perform precise programmed movements while also providing conversational programming capabilities for simpler jobs.

---

HAAS TM2 – 2006 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 200 IPM
Y-Axis Rapid Traverse	Approx. 200 IPM
Z-Axis Rapid Traverse	Approx. 200 IPM
Maximum Cutting Feedrate	Approx. 200 IPM
X-Axis Maximum Thrust	Approx. 2,000 lbf
Y-Axis Maximum Thrust	Approx. 2,000 lbf
Z-Axis Maximum Thrust	Approx. 2,000 lbf
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes

The TM2 provides practical feedrates for general toolroom, prototype, maintenance, and small-batch machining applications.

---

HAAS TM2 – 2006 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Available
Coolant Pump	Available
Coolant Tank	Configuration Dependent
Programmable Coolant	Available
Air Blast	Available
Chip Auger	Optional / Configuration Dependent
Chip Conveyor	Configuration Dependent
Through-Spindle Coolant	Optional
Coolant Filtration	Configuration Dependent
Mist Collector	Optional

Because this is a used 2006 machine, the actual coolant and chip-management configuration should be confirmed from the machine’s option list and physical inspection.

---

HAAS TM2 – 2006 – AUTOMATION / PROBING

Specification	Details
Automatic Tool Changer	No
Work Probe	Optional
Tool Probe	Optional
Wireless Probing	Configuration Dependent
4th-Axis Drive	Optional
4th-Axis Wiring	Optional
Rigid Tapping	Available
Conversational Programming	Yes
Rotary Table Integration	Available
Manual Tool Change	Standard

The TM2 can be equipped with additional probing and rotary equipment, but manual tool changing remains one of its primary differences from the TM2P.

---

HAAS TM2 – 2006 – POWER REQUIREMENTS

Specification	Details
Spindle Motor	7.5 HP / 5.6 kW
Electrical Input	220 VAC
Electrical Service	Single- or Three-Phase, Configuration Dependent
Three-Phase Low Voltage	220 VAC
Three-Phase High Voltage	440 VAC
Shop Air	Required
Air Requirement	Approx. 4 SCFM @ 100 PSI
Industrial Power	Required

Electrical requirements should be confirmed from the machine’s serial-number-specific documentation before installation.

---

HAAS TM2 – 2006 – DIMENSIONS

Specification	Details
Approximate Shipping Length	127″
Approximate Shipping Width	78″
Approximate Shipping Height	100″
Approximate Shipping Weight	5,000–5,100 lbs
Approximate Metric Weight	2,270–2,315 kg
Floor Space	Compact Toolroom Configuration
Installation	Industrial
Rigging	Required

Actual shipping dimensions and weight can vary depending on coolant equipment, enclosure configuration, and other options installed on the machine.

---

HAAS TM2 – 2006 – GENERAL INFORMATION

Specification	Details
Manufacturer	Haas
Model	TM2
Year	2006
Machine Category	Vertical Machining Center
Machine Type	CNC Toolroom Mill
Axis Configuration	3-Axis
X-Axis Travel	40″
Y-Axis Travel	16″
Z-Axis Travel	16″
Table Size	Approx. 57.8″ x 10.5″
Maximum Table Load	Approx. 350 lbs
Spindle Speed	Approx. 4,000 RPM
Spindle Power	7.5 HP
Spindle Taper	40 Taper
Tool Changer	None
Tool Change	Manual
Maximum Feedrate	Approx. 200 IPM
CNC Control	Haas CNC
4th-Axis Capability	Optional
Machine Weight	Approx. 5,060 lbs

---

INDUSTRIES THAT USE HAAS TM2

The HAAS TM2 is suitable for:

• General machine shops
• Tool and die
• Mold manufacturing
• Aerospace
• Automotive
• Defense
• Maintenance and repair
• Prototype manufacturing
• Educational facilities
• Industrial machinery
• Contract manufacturing
• Precision engineering

Its large X-axis travel makes it particularly useful for long plates, fixtures, brackets, tooling, and machine components.

---

TYPICAL PARTS HAAS TM2 CAN PRODUCE

The TM2 can machine:

• Brackets
• Mounting plates
• Fixtures
• Jigs
• Housings
• Flanges
• Tooling components
• Prototype parts
• Machine components
• Repair components
• Industrial brackets
• Automotive components
• Custom production parts

Typical operations include face milling, pocketing, contouring, drilling, boring, tapping, reaming, slotting, and 3-axis profiling.

---

WHY CHOOSE HAAS TM2

The major advantage of the HAAS TM2 is its combination of a 40 x 16 x 16-inch work envelope and a relatively simple toolroom-mill design. The 40-inch X-axis travel gives the machine excellent capacity for longer workpieces.

The 7.5 HP, 4,000 RPM, 40-taper spindle provides enough power for a broad range of general machining applications. Its manual tool-change arrangement also eliminates the additional complexity of an automatic tool changer.

For prototype and maintenance work, this can be an advantage because the operator can quickly change tools according to the job without needing a large tool magazine.

---

WHY BUY USED HAAS TM2 – 2006

A used 2006 HAAS TM2 can provide an affordable way for a shop to add CNC milling capability without investing in a newer production VMC.

The machine is particularly attractive for prototype work, repair machining, tooling, maintenance, educational use, and low-volume production. Its 40-inch X-axis travel provides significantly more capacity than many small CNC mills.

Before purchasing a used TM2, buyers should inspect the spindle, ballscrews, linear guides, table, way covers, drawbar, control electronics, coolant system, lubrication system, and electrical cabinet.

Because this is a 2006 machine, it is particularly important to check for backlash, spindle noise, axis accuracy, servo alarms, CRT/control condition, and evidence of previous crashes.

Buyers should also request power-on hours, cutting hours, spindle hours, maintenance records, alarm history, and a test-cut demonstration.

---

HOW MUCH DOES A USED HAAS TM2 – 2006 COST?

The value of a 2006 HAAS TM2 is strongly influenced by its mechanical condition, spindle condition, CNC control, hours, options, tooling, and maintenance history.

As an older TM2 without an automatic tool changer, it generally sells for less than newer TM2P machines. However, a clean machine with good geometry, a healthy spindle, functioning CNC control, and useful tooling can still have strong value for smaller shops.

USED HAAS TM2 – 2006 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$10,000 – $14,000
Functional Used Machine	$14,000 – $18,000
Good Condition / Production Ready	$18,000 – $22,000
Excellent / Well Equipped	$22,000 – $26,000
Very Low Hours / Premium Condition	$26,000+

For a 2006 HAAS TM2 in good working condition, I would estimate approximately $16,000–$22,000 USD.

For your inventory listing, I would recommend a practical asking-price range of $18,000–$22,000 USD for a clean, operational machine.

A low-hour machine with excellent spindle condition, good geometry, probing, 4th-axis capability, coolant equipment, and complete tooling could potentially command $22,000–$26,000+.

A high-hour machine requiring repairs or with substantial backlash, spindle wear, control problems, or missing accessories could fall closer to $10,000–$16,000.

Best estimated listing value: $18,000–$22,000 USD.