The Mazak VERSATECH V-100N/160 is a large-scale 5-axis double-column (gantry-type) machining center designed for high-precision machining of very large and heavy workpieces. It is part of Mazak’s VERSATECH series, which focuses on process integration, reduced setup time, and high productivity for industries such as aerospace, energy, heavy equipment, and die & mold. The machine features a rigid double-column structure with a wide distance between columns, providing excellent stability and the ability to handle oversized components.
The V-100N/160 offers a large table size of approximately 3000 mm × 2100 mm with a load capacity of around 43,000 kg, making it suitable for extremely heavy parts. It is equipped with a powerful BT50 spindle, typically running at 8,000 rpm, with options for higher-speed or high-torque configurations depending on the application.
A key feature is its multi-position spindle head, which can machine vertical, horizontal, and angled surfaces without requiring head changes, significantly reducing non-cutting time. Optional simultaneous 5-axis capability with B- and C-axis movements allows machining of complex geometries in a single setup. Overall, the VERSATECH V-100N/160 is engineered for large-part, high-precision, and high-efficiency machining environments.
MAZAK VERSATECH V-100N/160 SPECIFICATIONS
MAZAK VERSATECH V-100N/160 – AXIS
Number of Axes: 5 (X, Y, Z, W, B)
Axis Configuration: Vertical moving column with horizontal spindle
MAZAK VERSATECH V-100N/160 – POWER & AIR REQUIREMENTS
Power Requirement: Approx. 70–100 kVA
Voltage: 3-phase industrial supply
Air Requirement: Clean, dry compressed air
Air Pressure: Approx. 5–7 bar
MAZAK VERSATECH V-100N/160 – DIMENSIONS
Machine Footprint: Very large floor-standing machine
Structure: Moving column design
Construction: Heavy-duty cast iron
Accessibility: Operator-friendly large work area
Installation: Requires reinforced foundation
MAZAK VERSATECH V-100N/160 – GENERAL INFORMATION
Machine Type: Vertical machining center with horizontal spindle
Capability: Large-part multi-face machining
Design Focus: Heavy-duty and high precision
Advantage: Reduced repositioning for large parts
Ideal For: Large structural and complex components
INDUSTRIES THAT USE MAZAK VERSATECH V-100N/160
Aerospace
Energy
Heavy Equipment
Oil & Gas
Industrial Machinery
TYPICAL PARTS MAZAK VERSATECH V-100N/160 CAN PRODUCE
Structural aerospace components
Turbine housings
Large frames and bases
Heavy machine components
Energy sector parts
WHY CHOOSE MAZAK VERSATECH V-100N/160
Designed for large and heavy workpieces
High rigidity and stability for heavy cutting
Multi-axis capability for complex parts
Reduced setups for large components
Ideal for high-precision heavy-duty machining
WHY BUY USED MAZAK VERSATECH V-100N/160
Buying a used Mazak VERSATECH V-100N/160 is a highly strategic decision for manufacturers working with large and heavy components, as it provides access to advanced 5-axis gantry machining at a significantly reduced cost. These machines are built for heavy-duty applications and long-term durability, meaning they can maintain strong performance over many years if properly maintained.
One of the most important factors when evaluating a used V-100N/160 is cutting time rather than just age. Machines used in heavy industries such as energy, shipbuilding, or aerospace often accumulate high cutting hours due to long machining cycles and demanding materials. This can lead to wear in critical components such as the spindle, guideways, and ball screws, which may require refurbishment. These machines are typically priced lower but may involve higher maintenance costs.
On the other hand, machines used in low-volume production, toolroom work, or specialized applications often have lower cutting hours and better preserved geometry, making them more desirable even if older. Another advantage is that many used units include valuable options such as high-torque spindles, 5-axis heads, and automation systems like PALLETECH, which would be extremely expensive to add to a new machine.
Overall, a used VERSATECH V-100N/160 offers unmatched capacity and capability at a fraction of the cost of a new large gantry system.
HOW MUCH DOES A USED MAZAK VERSATECH V-100N/160COST?
The cost of a used Mazak VERSATECH V-100N/160 varies significantly based on year of manufacture, configuration, and most importantly, cutting hours. Due to its large size and specialized application, pricing is typically higher than standard 5-axis machines.
For machines effectively comparable to early large gantry 5-axis systems (pre-2000), prices generally range from $150,000 to $300,000, though availability is limited and these machines usually have very high cutting hours and outdated controls.
For machines in the 2000–2010 range, prices typically fall between $300,000 and $700,000 depending on condition, spindle type, and included features such as 5-axis heads or turning tables. Machines with lower cutting hours, upgraded controls, or recent rebuilds command higher prices within this range.
For newer machines from 2010 to 2025, prices can range from $700,000 to $2,000,000 or more. Machines equipped with advanced Mazatrol Smooth controls, high-torque spindles, and automation systems such as PALLETECH or large pallet systems are at the top end of the market due to their productivity and capability.
Cutting hours are the most critical pricing factor. Low-hour machines with strong maintenance history command premium pricing, while heavily used machines are discounted due to potential refurbishment costs, especially for spindle systems and large structural components.
