USED OKUMA MILLAC 1000VH

The OKUMA MILLAC 1000VH is a large-capacity, heavy-duty 5-axis vertical machining center designed for process-intensive machining of medium to large components in a single setup. It belongs to Okuma’s MILLAC VH series, which focuses on high rigidity, multi-face machining, and stable long-term accuracy for demanding industrial applications such as aerospace structures, automotive tooling, heavy engineering, and large mold manufacturing.

A key feature of the MILLAC 1000VH is its rigid box-way construction combined with a swivel spindle and large rotary table system. This allows the machine to perform complex angled machining and multi-sided operations without repeated re-fixturing, significantly reducing setup time and improving accuracy. The structure is designed for heavy cutting stability, making it suitable for steel, cast iron, and large precision components.

The machine offers a working envelope of approximately X: 1,850 mm, Y: 1,300 mm, and Z: 1,000 mm, making it suitable for large and complex parts. The table size is typically 1,000 × 1,000 mm, with a maximum load capacity of around 2,000 kg depending on configuration.

The spindle system is built for both torque and flexibility. Standard spindle speed is 6,000 RPM, with optional configurations up to 10,000 RPM. Spindle power is typically around 18.5–22 kW, allowing strong roughing capability while still supporting precision finishing operations.

Tool capacity is a major strength of this machine, ranging from 80 tools as standard and expanding up to 240 tools depending on production requirements. This makes it highly suitable for complex, multi-operation machining with minimal tool change interruptions.

Rapid traverse rates and rotary axis indexing capability support efficient multi-face machining, while the rigid structure ensures stability during heavy cutting cycles.

Overall, the MILLAC 1000VH is designed for large, complex parts where rigidity, process reduction, and high-accuracy 5-axis machining are essential.

OKUMA MILLAC 1000VH SPECIFICATIONS

WHY BUY USED OKUMA MILLAC 1000VH

Buying a used OKUMA MILLAC 1000VH is a strong option for manufacturers who need a large 5-axis machining center but want to reduce capital investment significantly. Since this machine is built for heavy-duty multi-face machining, it retains strong structural capability even after years of production use.

One of the biggest advantages is cost savings. A new MILLAC 1000VH with high tool capacity, swivel spindle configuration, and automation options can be expensive. A used machine allows access to the same large-format 5-axis capability at a much lower price, making it attractive for job shops and industrial manufacturers handling large components.

Another key benefit is process reduction. The machine is designed to complete multiple operations—milling, drilling, and angled machining—in a single setup. This reduces fixturing errors, improves part accuracy, and shortens overall production time. Even used machines maintain this advantage, making them highly efficient for complex parts.

Cutting time (machine hours) plays an important role in used machine evaluation. Lower-hour machines typically have better spindle condition, improved rotary axis accuracy, and reduced wear on critical components. However, the MILLAC 1000VH is designed with a rigid structure that helps maintain stability even at higher usage levels if properly maintained.

Another advantage is flexibility in production environments. It can handle both low-volume complex parts and higher-volume production depending on tool magazine configuration and setup strategy.

Additionally, Okuma’s global service network ensures long-term availability of parts, support, and control systems, reducing operational risk for used machine buyers.

Overall, a used MILLAC 1000VH offers a strong balance of large-capacity machining, rigidity, and cost efficiency for demanding manufacturing applications.

HOW MUCH DOES A USED OKUMA MILLAC 1000VHCOST?

The cost of a used OKUMA MILLAC 1000VH depends on machine age, condition, spindle configuration, tool capacity, automation level, and total cutting time. As a large 5-axis machining center, pricing is strongly influenced by structural condition and production history.

For older machines (typically pre-2000 or heavily used units with 40,000–70,000+ cutting hours), prices generally range from $90,000 to $180,000. These machines may require spindle refurbishment, control upgrades, or rotary axis recalibration before being fully production-ready.

For machines built between 2000 and 2010, used pricing typically falls between $180,000 and $320,000, depending on condition and maintenance history. Machines in this category often have moderate cutting hours (20,000–40,000 hours) and can still perform reliably in production environments if properly maintained.

For newer machines manufactured between 2010 and 2025, pricing generally ranges from $320,000 to $550,000+. Units with lower cutting time, expanded tool magazines (120–240 tools), or automation systems typically command higher prices.

Cutting time is one of the most important pricing factors. Lower-hour machines generally have better spindle health, tighter axis accuracy, and reduced wear on rotary systems. Higher-hour machines may be more affordable initially but can require additional investment in spindle or axis servicing.

Other key factors affecting price include spindle configuration (6,000 vs 10,000 RPM), control generation (OSP systems), tool magazine size, and whether the machine has been used in continuous heavy production environments.

In conclusion, the used MILLAC 1000VH market is driven mainly by condition and cutting hours. A well-maintained mid-hour machine typically offers the best value, combining large-scale 5-axis capability with significant cost savings over new equipment.