USED OKUMA CAPTAIN L370M – 2008

The OKUMA CAPTAIN L370M 2008 is a heavy-duty CNC Multi-Function Turning Center designed to combine precision turning with live-tool milling, drilling, tapping, boring, threading, and C-axis machining. The CAPTAIN L370M is designed for manufacturers that need more capability than a conventional CNC lathe, allowing secondary milling and drilling operations to be performed without removing the workpiece from the spindle. This can reduce setups, improve feature alignment, and increase overall production efficiency.

The 2008 OKUMA CAPTAIN L370M provides approximately 20.86″ (529.8 mm) of swing over the bed, a maximum turning diameter of approximately 13.3″ (337.8 mm), and a maximum machining length of approximately 26.5″ (673 mm) on the documented 2008 configuration. The machine is equipped with an 8″ hydraulic three-jaw chuck, approximately 2″ bar capacity, A2-6 spindle nose, approximately 3.15″ spindle bore, 4,500 RPM main spindle, and 30 HP spindle motor. The X and Z axis travels are approximately 10.23″ (260 mm) and 20.47″ (520 mm) respectively.

The M configuration adds live tooling and full C-axis capability, allowing the machine to perform radial and axial milling, drilling, tapping, and other secondary operations. The 12-position turret can accommodate driven tooling, while the machine can also be equipped with a tailstock, bar feeder, chip conveyor, tool presetter, parts catcher, mist collector, and other production accessories. A typical 2008 machine is equipped with an OKUMA OSP-P200L CNC control.

The OKUMA CAPTAIN L370M 2008 is an excellent choice for manufacturers producing shafts, flanges, hydraulic components, pump components, valve bodies, automotive components, fittings, bushings, and other precision turned and milled parts.

---

OKUMA CAPTAIN L370M 2008 – AXIS

Specification	Value
X Axis	260 mm (10.23″)
Z Axis	520 mm (20.47″)
Y Axis	Not Standard
C Axis	360°
Machine Configuration	CNC Multi-Function Turning Center
Axis Configuration	X / Z / C
B Axis	Not Standard
Live Tooling	Yes

---

OKUMA CAPTAIN L370M 2008 – AXIS TRAVELS / WORK ENVELOPE

Specification	Value
Swing Over Bed	529.8 mm (20.86″)
Swing Over Cross Slide	Approximately 419 mm (16.5″)
Maximum Turning Diameter	Approximately 337.8 mm (13.3″)
Maximum Machining Length	Approximately 673 mm (26.5″)
X Axis Travel	260 mm (10.23″)
Z Axis Travel	520 mm (20.47″)
Distance Between Centers	Approximately 520 mm (20.47″)
Main Spindle Bore	Approximately 80 mm (3.15″)
Main Bar Capacity	Approximately 50.8 mm (2″)
Chuck Size	8″
C Axis	360°

---

OKUMA CAPTAIN L370M 2008 – CAPACITY

Specification	Value
Machine Type	CNC Multi-Function Turning Center
Main Chuck	8″ Hydraulic 3-Jaw
Maximum Turning Diameter	Approximately 13.3″
Maximum Machining Length	Approximately 26.5″
Main Bar Capacity	2″
Main Spindle Bore	Approximately 3.15″
Main Spindle Speed	4,500 RPM
X-Axis Travel	10.23″
Z-Axis Travel	20.47″
C-Axis	Yes
Live Tooling	Yes
Tailstock	Yes
Sub-Spindle	No
Turret	12-Position

---

OKUMA CAPTAIN L370M 2008 – SPINDLE

Specification	Value
Main Spindle Speed	4,500 RPM
Spindle Motor	30 HP
Spindle Nose	A2-6
Spindle Bore	Approximately 3.15″
Main Bar Capacity	2″
Chuck	8″
C Axis	360°
Spindle Configuration	Main Spindle
Speed Range	Configuration Dependent
Spindle Orientation	Configuration Dependent

The 30 HP main spindle provides substantial cutting power for roughing and finishing operations while the 4,500 RPM maximum speed supports higher-speed turning and finishing cycles.

---

OKUMA CAPTAIN L370M 2008 – MILLING SPINDLE

Specification	Value
Live Tooling	Yes
Milling Spindle Speed	Up to Approximately 4,500 RPM
Milling Spindle Motor	Approximately 7.5 HP / Configuration Dependent
Tooling Configuration	Axial / Radial Driven Tools
C-Axis	360°
Milling Capability	Yes
Drilling	Yes
Tapping	Yes
Cross Milling	Yes
Face Milling	Yes
Driven Toolholders	Configuration Dependent

The live-tool system allows milling and drilling operations to be performed directly on the lathe, reducing the need for a separate machining center for secondary features.

---

OKUMA CAPTAIN L370M 2008 – TURRET / TOOLING

Specification	Value
Turret Type	Automatic NC Turret
Tool Capacity	12 Stations
Driven Tool Stations	Configuration Dependent
Tool Indexing	Automatic
Live Tooling	Yes
Static Tooling	Yes
OD Tooling	Yes
ID Tooling	Yes
Tool Presetter	Configuration Dependent
Tool Management	Automatic

The 12-position turret provides the tool capacity required for turning, boring, threading, grooving, drilling, and milling operations.

---

OKUMA CAPTAIN L370M 2008 – CONTROL SYSTEM

Specification	Value
CNC Control	OKUMA OSP-P200L
Programming	ISO G-Code / Okuma Programming
C-Axis Control	Yes
Live Tool Control	Yes
Tool Offset Management	Yes
Work Coordinate Management	Yes
Fixed Cycles	Yes
Threading Cycles	Yes
Synchronous Tapping	Configuration Dependent
Tool Life Management	Configuration Dependent
IGF Conversational Programming	Configuration Dependent
Diagnostic Functions	Yes

The OSP-P200L control provides a production-oriented CNC platform for conventional turning and multi-function machining applications.

---

OKUMA CAPTAIN L370M 2008 – FEEDRATES

Specification	Value
X Rapid Traverse	787 IPM
Z Rapid Traverse	984 IPM
X Rapid Traverse	Approximately 20 m/min
Z Rapid Traverse	Approximately 25 m/min
Cutting Feedrate	Approximately 394 IPM / Configuration Dependent
Maximum Feedrate	Configuration Dependent
C-Axis Positioning	CNC Controlled
Live Tool Feedrate	Configuration Dependent
Interpolation	Linear / Circular

The fast X and Z rapid-traverse rates help reduce non-cutting time during repetitive turning and multitasking cycles.

---

OKUMA CAPTAIN L370M 2008 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Standard
Coolant System	Yes
Chip Conveyor	Equipped / Configuration Dependent
Chip Bucket	Configuration Dependent
Coolant Filtration	Configuration Dependent
High-Pressure Coolant	Configuration Dependent
Automatic Lubrication	Standard
Mist Collector	Configuration Dependent
Coolant Gun	Configuration Dependent
Chip Management	Conveyor / Washdown

A documented 2008 machine configuration can include a chip conveyor, while individual machines may have different coolant and filtration options.

---

OKUMA CAPTAIN L370M 2008 – POWER REQUIREMENTS

Specification	Value
Electrical Supply	Three Phase
Voltage	Configuration Dependent
Frequency	50/60 Hz
Main Spindle Motor	30 HP
Live Tool Motor	Approximately 7.5 HP
Air Supply	Required
Hydraulic System	Yes
Connected Load	Configuration Dependent
Transformer	Configuration Dependent

---

OKUMA CAPTAIN L370M 2008 – DIMENSIONS

Specification	Value
Length	Approximately 107″
Width	Approximately 72″
Height	Configuration Dependent
Machine Weight	Approximately 9,400–9,900 lbs
Floor Space	Approximately 107″ × 72″
Bar Feeder Footprint	Additional Space Required
Chip Conveyor Footprint	Additional Space Required

---

OKUMA CAPTAIN L370M 2008 – GENERAL INFORMATION

Item	Details
Manufacturer	Okuma
Model	CAPTAIN L370M
Year	2008
Machine Type	CNC Multi-Function Turning Center
CNC Control	OSP-P200L
Main Chuck	8″
Main Spindle	Yes
Main Spindle Speed	4,500 RPM
Main Spindle Motor	30 HP
Spindle Nose	A2-6
Spindle Bore	Approximately 3.15″
Main Bar Capacity	2″
Swing Over Bed	20.86″
Maximum Turning Diameter	Approximately 13.3″
Maximum Machining Length	Approximately 26.5″
X-Axis Travel	10.23″
Z-Axis Travel	20.47″
C-Axis	360°
Live Tooling	Yes
Milling Capability	Yes
Turret	12 Stations
Tailstock	Yes
Chip Conveyor	Configuration Dependent
Bar Feeder	Configuration Dependent
Tool Presetter	Configuration Dependent

---

INDUSTRIES THAT USE OKUMA CAPTAIN L370M 2008

The OKUMA CAPTAIN L370M 2008 is well suited for industries that require turning combined with milling and secondary machining operations, including:

• Automotive
• Aerospace
• Oil & gas
• Hydraulic and pneumatic
• Energy
• Defense
• Industrial machinery
• Pump and valve manufacturing
• Heavy equipment
• General precision manufacturing
• Job shops
• Contract manufacturing

Its combination of 30 HP turning power, C-axis control, live tooling, and a 12-position turret makes it particularly useful for complex medium-sized components.

---

TYPICAL PARTS OKUMA CAPTAIN L370M 2008 CAN PRODUCE

The OKUMA CAPTAIN L370M 2008 can manufacture:

• Shafts
• Flanges
• Bushings
• Hydraulic components
• Valve components
• Pump components
• Automotive components
• Fittings
• Couplings
• Bearing components
• Oil and gas components
• Precision sleeves
• Threaded components
• Complex turned and milled parts

The machine can perform turning, facing, boring, threading, grooving, drilling, tapping, cross milling, face milling, contouring, C-axis positioning, and other multi-function machining operations.

---

WHY CHOOSE OKUMA CAPTAIN L370M 2008

The OKUMA CAPTAIN L370M 2008 is an excellent choice for manufacturers looking for a rigid CNC turning center with integrated milling capability. Its combination of 30 HP spindle power, 4,500 RPM main spindle, C-axis control, live tooling, and 12-position turret gives the machine substantially more flexibility than a conventional two-axis CNC lathe.

The C-axis and driven tooling allow the machine to perform secondary machining while the component remains securely clamped in the spindle. This is particularly useful for parts requiring radial holes, bolt patterns, flats, slots, milled surfaces, and other off-center features.

The machine’s approximately 13.3″ turning diameter and 26.5″ machining length also provide useful capacity for medium-sized shafts, housings, flanges, and other industrial components.

---

WHY BUY USED OKUMA CAPTAIN L370M 2008

Purchasing a used OKUMA CAPTAIN L370M 2008 allows manufacturers to acquire a capable Japanese-built CNC multi-function turning center while reducing the capital investment compared with purchasing newer equipment.

Many used machines may include valuable options such as:

• OKUMA OSP-P200L CNC control
• 8″ hydraulic three-jaw chuck
• 30 HP main spindle
• 4,500 RPM main spindle
• 2″ bar capacity
• Full C-axis
• Live tooling
• 12-position turret
• Milling heads
• Tailstock
• Chip conveyor
• Bar feeder
• Tool presetter
• Parts catcher
• Mist collector
• IGF conversational programming
• Synchronous tapping
• Tool life management
• Complete tooling package

A documented 2008 example is equipped with OSP-P200L control, 3-jaw chuck, bar feed, chip conveyor, tailstock, full C-axis, and milling capability, demonstrating the type of production package available on this model.

Before purchasing, buyers should inspect the main spindle, live-tool spindle, C-axis positioning, turret indexing, X/Z-axis movement, ballscrews, linear ways, chuck, tailstock alignment, hydraulic system, CNC control, coolant system, bar feeder, chip conveyor, and overall machine geometry.

Spindle hours, cutting hours, alarm history, maintenance records, tooling, and evidence of previous crashes should also be reviewed.

---

HOW MUCH DOES A USED OKUMA CAPTAIN L370M 2008 COST?

The value of a used OKUMA CAPTAIN L370M 2008 depends heavily on spindle hours, machine condition, main-spindle and live-tooling condition, C-axis accuracy, turret condition, CNC control, tailstock, bar feeder, chip conveyor, tooling package, and maintenance history.

Machines equipped with OSP-P200L control, full C-axis, live tooling, tool presetter, parts catcher, tailstock, chip conveyor, bar feeder, and complete tooling generally command higher resale values.

A documented 2008 OKUMA CAPTAIN L370M has been offered around $17,500 USD, providing a useful market reference for a used machine equipped with an OSP-P200L control, chuck, bar feeder, chip conveyor, tailstock, C-axis, and milling capability.

For used-equipment listing purposes, a used OKUMA CAPTAIN L370M 2008 can typically be expected to sell in the approximately $15,000 to $30,000 USD range, with the actual value depending heavily on condition, spindle hours, options, tooling, and location.

A low-hour machine with a healthy 30 HP spindle, accurate C-axis operation, functioning live tooling, reliable OSP control, complete tooling, bar feeder, chip conveyor, and documented maintenance may command a premium. A machine requiring spindle, live-tool, turret, ballscrew, control, hydraulic, or electrical repairs may sell for considerably less.