USED MAZAK INTEGREX I-100H S

The Mazak Integrex i-100H S is a compact horizontal multi-tasking CNC machine designed for high-precision machining of small to medium-sized complex components. As part of Mazak’s Integrex i-Series, the “H” configuration provides a horizontal layout for improved chip evacuation and thermal stability, while the “S” designation indicates the inclusion of a second spindle. This allows automatic part transfer and complete back-side machining within a single setup, significantly improving productivity and accuracy.

The machine integrates turning and milling operations under the “DONE IN ONE” concept, eliminating the need for multiple setups. It features a high-speed turning spindle combined with a B-axis milling spindle, enabling full 5-axis simultaneous machining for complex geometries. The i-100H S is typically equipped with a 6-inch chuck and offers a maximum machining diameter of approximately 600 mm and a machining length of around 500–600 mm. Its Y-axis travel of about 200 mm allows efficient off-center machining and contouring.

The milling spindle operates at speeds up to 12,000 RPM, supporting precision and light to medium-duty applications. Advanced features such as Mazatrol Smooth control, thermal compensation, and automation compatibility enhance performance. Overall, the Integrex i-100H S is ideal for aerospace, medical, and precision engineering industries.

MAZAK INTEGREX I-100H S SPECIFICATIONS

WHY BUY USED MAZAK INTEGREX I-100H S

Buying a used Mazak Integrex i-100H S is a practical option for manufacturers seeking dual-spindle multi-tasking capability at a significantly lower investment. Used machines typically offer savings in the range of 40% to 70% compared to new units, depending on age, condition, and cutting hours. This makes it particularly attractive for shops aiming to increase productivity without major capital expenditure.

Cutting time is one of the most critical factors when evaluating a used i-100H S. Machines with higher cutting hours are generally more affordable but may require inspection or maintenance of key components such as both turning spindles, the milling spindle, and guideways. However, Mazak machines are known for their durability and robust construction, allowing even higher-hour machines to remain productive with proper upkeep. Machines with low cutting time command higher prices due to reduced wear and longer operational life.

Another major advantage is efficiency. The dual-spindle configuration allows complete machining in one cycle, reducing setup time, labor, and handling errors. Additionally, used machines are often available much faster than new ones. Overall, buying used provides a strong balance of capability, productivity, and return on investment.

HOW MUCH DOES A USED MAZAK INTEGREX I-100H S COST?

The cost of a used Mazak Integrex i-100H S depends on machine condition, configuration, and especially cutting time. Since this model has been available for several years, machines can be found across multiple age ranges.

Machines built before 2000 are generally rare for this configuration but, if available, typically range between $100,000 and $180,000. These machines often have high cutting hours and may require refurbishment, making them suitable for lighter-duty applications or budget-focused buyers.

Machines from 2000 to 2010 typically range from $180,000 to $350,000, depending on condition and cutting time. These machines offer a strong balance of dual-spindle capability and affordability, especially if well maintained and with moderate cutting hours.

More recent machines from 2010 to 2025 generally range from $350,000 to $700,000 or more, particularly if equipped with advanced controls, automation systems, and low cutting hours. Machines with minimal cutting time command premium prices due to reduced wear and longer service life.

Cutting time remains a key factor in determining value, as it directly impacts spindle condition, axis wear, and overall reliability. Overall, the i-100H S maintains strong resale value due to its compact design, dual-spindle capability, and multi-tasking efficiency.