USED MAZAK PFH-4800 – 2005
The 2005 MAZAK PFH-4800 is a heavy-duty horizontal machining center designed for manufacturers requiring rigid four-axis machining capability, substantial workpiece capacity, and reliable production performance. Manufactured by Yamazaki Mazak, the PFH-4800 belongs to Mazak’s PFH family of horizontal machining centers and is designed around a robust machine structure, large work envelope, high-speed spindle, automatic tool changing, and palletized workholding. The machine is particularly well suited for manufacturers machining medium and large industrial components where rigidity, accessibility, and efficient chip evacuation are important.
The MAZAK PFH-4800 utilizes a horizontal spindle configuration that allows chips to fall naturally away from the cutting area during machining. This horizontal orientation is particularly beneficial during deep-hole machining, pocketing, and heavy material-removal operations because chips are less likely to accumulate around the cutting zone. The rigid machine construction also supports stable machining during aggressive cutting operations, helping manufacturers maintain dimensional consistency and surface quality across production runs.
The PFH-4800 provides a substantial machining envelope with approximately 1,000 mm of X-axis travel, approximately 800 mm of Y-axis travel, and approximately 825 mm of Z-axis travel. This combination provides sufficient working capacity for a broad range of industrial components. The machine is commonly configured around a 500 mm square pallet, making it suitable for medium-to-large workpieces and production applications requiring repeatable four-axis machining.
The machine’s fourth-axis capability provides manufacturers with additional flexibility when machining components from multiple sides. Workpieces can be indexed around the B-axis to access different faces without removing the component from the pallet. This can reduce setup time, improve positional consistency, and eliminate the need for multiple manual workholding setups.
The MAZAK PFH-4800 is commonly equipped with a high-performance horizontal spindle capable of reaching approximately 10,000 RPM, depending on configuration. Spindle motor power can reach approximately 30 HP, providing sufficient cutting power for machining steel, cast iron, aluminum, stainless steel, and other industrial materials. The combination of spindle speed and torque makes the machine suitable for both heavy roughing and precision finishing operations.
Automatic tool changing further improves production efficiency. The PFH-4800 can be equipped with a large-capacity automatic tool changer, allowing manufacturers to maintain numerous cutting tools within the machine and reduce operator intervention during production. Tool capacity varies by individual machine configuration and may include 40- or 60-tool arrangements.
The machine can be used across automotive, aerospace, heavy equipment, energy, industrial machinery, transportation, and general contract manufacturing. Typical components include housings, gearbox components, valve bodies, pump components, structural plates, manifolds, brackets, bearing housings, and other precision-machined parts.
Depending on the individual machine, additional equipment can include a chip conveyor, coolant-through-spindle system, probing, rotary pallet systems, high-pressure coolant, and automatic tool management. These accessories can significantly increase productivity and reduce non-cutting time.
Because of its combination of horizontal machining, large travels, four-axis capability, substantial spindle power, and palletized production, the 2005 MAZAK PFH-4800 remains a useful used CNC horizontal machining center for manufacturers seeking reliable heavy-duty machining capability.
MAZAK PFH-4800 – AXIS
| SpecificationDetails | |
|---|---|
| Machine Configuration | Horizontal Machining Center |
| Axis Configuration | X, Y, Z, B |
| Number of Controlled Axes | 4 |
| X-Axis Travel | Approx. 39.4 in |
| Y-Axis Travel | Approx. 31.5 in |
| Z-Axis Travel | Approx. 32.5 in |
| B-Axis | 360° Rotary Indexing |
| X/Y/Z Rapid Traverse | Approx. 1,575 IPM |
| Machine Structure | Rigid Horizontal Configuration |
MAZAK PFH-4800 – AXIS TRAVELS / WORK ENVELOPE
| SpecificationDetails | |
|---|---|
| X-Axis Travel | Approx. 1,000 mm / 39.4 in |
| Y-Axis Travel | Approx. 800 mm / 31.5 in |
| Z-Axis Travel | Approx. 825 mm / 32.5 in |
| Pallet Size | Approx. 500 × 500 mm |
| Maximum Workpiece Diameter | Approx. 800 mm |
| Maximum Workpiece Height | Approx. 1,000 mm |
| B-Axis | 360° Indexing |
| Spindle-to-Pallet Distance | Configuration Dependent |
The substantial axis travels and 500 mm pallet provide a useful machining envelope for medium and large industrial components requiring multi-face machining.
MAZAK PFH-4800 – CAPACITY / TABLE
| SpecificationDetails | |
|---|---|
| Machine Type | Horizontal Machining Center |
| Pallet Configuration | Single Pallet |
| Pallet Size | Approx. 500 × 500 mm |
| Number of Pallets | 1 |
| Maximum Workpiece Weight | Approx. 1,100 lbs |
| Rotary Axis | B-Axis |
| Workholding | Fixture / Vise / Custom Workholding |
| Production Capability | Medium & Heavy-Duty Machining |
MAZAK PFH-4800 – SPINDLE
| SpecificationDetails | |
|---|---|
| Spindle Configuration | Horizontal |
| Maximum Spindle Speed | Approx. 10,000 RPM |
| Spindle Motor Power | Approx. 30 HP |
| Spindle Taper | CAT 50 / Configuration Dependent |
| Spindle Orientation | Horizontal |
| Spindle Application | Heavy-Duty Milling |
| Cutting Capability | Roughing & Finishing |
| Coolant Through Spindle | Configuration Dependent |
The high-power horizontal spindle provides the torque and cutting capability required for machining steel, cast iron, and other demanding industrial materials.
MAZAK PFH-4800 – TOOL CHANGER
| SpecificationDetails | |
|---|---|
| Tool Changer Type | Automatic Tool Changer |
| Tool Capacity | Approx. 40–60 Tools |
| Tooling Type | CAT 50 |
| Tool Change | Automatic |
| Tool Storage | Side-Mounted Tool Magazine |
| Tool Monitoring | Configuration Dependent |
| Tool Management | CNC-Controlled |
The large automatic tool magazine allows manufacturers to keep a wide variety of cutters available for complex production work and reduces manual tool-changing requirements.
MAZAK PFH-4800 – CONTROL SYSTEM
| SpecificationDetails | |
|---|---|
| CNC Control Platform | Mazatrol CNC |
| Common Control | Mazatrol Fusion / Configuration Dependent |
| Programming Capability | Conversational & G-Code |
| EIA/ISO Programming | Yes |
| CNC Display | Color Display / Configuration Dependent |
| Tool Offset Management | CNC Controlled |
| Custom Programming | Available |
| Fourth-Axis Programming | Yes |
Exact control generation can vary according to the individual 2005 machine and should be verified from the machine’s control cabinet and documentation.
MAZAK PFH-4800 – COOLANT / CHIP MANAGEMENT
| SpecificationDetails | |
|---|---|
| Coolant Delivery System | Flood Coolant |
| Chip Management | Chip Conveyor |
| Coolant Through Spindle | Configuration Dependent |
| High-Pressure Coolant | Available |
| Coolant Filtration | Configuration Dependent |
| Machine Enclosure | Fully Enclosed |
| Chip Evacuation | Horizontal Gravity-Assisted |
The horizontal spindle arrangement provides natural chip evacuation from the cutting area, while a chip conveyor can remove accumulated material from the machine enclosure during continuous production.
MAZAK PFH-4800 – ROTARY / B-AXIS
| SpecificationDetails | |
|---|---|
| Rotary Axis | B-Axis |
| Rotary Range | 360° |
| Axis Type | CNC Rotary Indexing |
| Multi-Face Machining | Yes |
| Angular Positioning | CNC Controlled |
| Typical Indexing | 1° / Configuration Dependent |
| Application | Four-Sided & Multi-Face Machining |
The B-axis allows the workpiece to be indexed around the horizontal machining center, enabling manufacturers to access multiple sides of a component without removing it from the workholding fixture.
MAZAK PFH-4800 – POWER REQUIREMENTS
| SpecificationDetails | |
|---|---|
| Main Spindle Motor | Approx. 30 HP |
| Electrical Configuration | Industrial CNC |
| Voltage Requirement | Configuration Dependent |
| Phase | 3-Phase |
| Transformer Requirement | Configuration Dependent |
| Pneumatic Requirement | Standard Shop Air |
| Installation | Industrial Production Environment |
Actual electrical requirements should be verified from the individual machine’s electrical documentation before installation.
MAZAK PFH-4800 – DIMENSIONS
| SpecificationDetails | |
|---|---|
| Approximate Machine Weight | 30,000+ lbs |
| Machine Length | Configuration Dependent |
| Machine Width | Configuration Dependent |
| Machine Height | Configuration Dependent |
| Installation Footprint | Large Production Layout |
| Floor Space | Heavy-Duty Horizontal Machining |
Exact dimensions and weight can vary depending on chip conveyor, coolant equipment, tool magazine capacity, rotary table configuration, and other installed options.
MAZAK PFH-4800 – GENERAL INFORMATION
| SpecificationDetails | |
|---|---|
| Manufacturer | Mazak |
| Model | PFH-4800 |
| Year | 2005 |
| Machine Category | Horizontal Machining Center |
| Axis Configuration | 4-Axis |
| Pallet Size | Approx. 500 × 500 mm |
| Spindle Orientation | Horizontal |
| Spindle Power | Approx. 30 HP |
| Maximum Spindle Speed | Approx. 10,000 RPM |
| X-Axis Travel | Approx. 39.4 in |
| Y-Axis Travel | Approx. 31.5 in |
| Z-Axis Travel | Approx. 32.5 in |
| Rotary Axis | B-Axis |
| Primary Application | Heavy-Duty Multi-Face Machining |
INDUSTRIES THAT USE MAZAK PFH-4800
The MAZAK PFH-4800 is well suited to industries requiring rigid horizontal machining capability for medium and large precision components. Its four-axis configuration allows manufacturers to machine multiple faces of a workpiece while reducing the need for repeated manual repositioning.
Automotive manufacturers can use the PFH-4800 for machining engine components, transmission housings, gearbox components, brackets, structural components, bearing housings, and other large production parts. The horizontal configuration is particularly useful for components containing deep pockets and multiple machined faces.
Heavy equipment manufacturers can utilize the machine for machining hydraulic components, gear housings, mounting structures, brackets, pump bodies, bearing supports, and other components used in construction and industrial equipment.
Aerospace manufacturers can use the PFH-4800 for machining structural components, housings, brackets, supports, adapters, and other large precision components requiring accurate multi-face machining.
Oil and gas manufacturers can utilize the machine for producing valve bodies, pump components, manifolds, flanges, housings, and other industrial components requiring substantial material removal and multi-face machining.
Energy and power-generation manufacturers can use the PFH-4800 for machining turbine-related housings, generator components, pump bodies, structural supports, and other heavy industrial parts.
Industrial machinery manufacturers can use the machine for producing gearbox housings, bearing blocks, machine bases, support structures, brackets, and other large components.
General machine shops can also benefit from the PFH-4800 when they need a flexible horizontal machining center capable of handling large workpieces and multiple machining operations.
The B-axis adds considerable flexibility for machining components with features on several sides. Instead of removing the workpiece and creating multiple setups, manufacturers can index the component within the machine and continue machining.
The machine is therefore particularly valuable for manufacturers requiring rigidity, large travels, four-axis capability, and efficient chip evacuation for medium- and heavy-duty machining applications.
TYPICAL PARTS MAZAK PFH-4800 CAN PRODUCE
| Part TypeExamples | |
|---|---|
| Automotive Components | Transmission Housings, Engine Parts |
| Heavy Equipment Parts | Hydraulic Bodies, Brackets, Supports |
| Aerospace Components | Housings, Adapters, Structural Parts |
| Oil & Gas Components | Valve Bodies, Manifolds, Flanges |
| Industrial Machinery | Gear Housings, Bearing Blocks |
| Energy Components | Pump Bodies, Generator Components |
| Precision Components | Plates, Mounts, Supports, Fixtures |
WHY CHOOSE MAZAK PFH-4800
The MAZAK PFH-4800 is designed for manufacturers seeking a rigid horizontal machining center capable of handling substantial workpieces and demanding cutting operations. One of its biggest advantages is the combination of large axis travels, a 500 mm-class pallet, high spindle power, and fourth-axis machining capability.
The horizontal spindle configuration provides important advantages during heavy machining. Chips naturally fall away from the cutting area instead of accumulating around deep pockets and machined surfaces. This can improve chip evacuation and reduce the risk of chip recutting during extended machining cycles.
The approximately 30 HP spindle provides substantial cutting power for steel, cast iron, stainless steel, and other industrial materials. Combined with a spindle speed of approximately 10,000 RPM, the machine can support both heavy roughing and higher-speed finishing operations.
The four-axis configuration is another major benefit. The B-axis allows manufacturers to index a component around the rotary axis and access multiple faces without removing the workpiece. This can reduce setup time, improve positional consistency, and simplify production of components with multiple machined surfaces.
The large X, Y, and Z travels provide substantial machining flexibility. With approximately 39.4 inches of X travel, 31.5 inches of Y travel, and 32.5 inches of Z travel, the machine can accommodate a broad range of medium and large industrial components.
Automatic tool changing further improves production efficiency. A large tool magazine allows manufacturers to keep multiple cutters loaded and reduces operator intervention during complex machining cycles.
The machine can also be equipped with useful production accessories such as chip conveyors, coolant-through-spindle systems, probing, high-pressure coolant, rotary workholding, and tool-management equipment. The availability of these options can make individual used machines significantly more production-ready.
Mazak’s CNC control platform also provides manufacturers with conversational and EIA/ISO programming capability, making the machine suitable for both experienced CNC programmers and shops already operating Mazak equipment.
For manufacturers seeking a dependable horizontal machining center with substantial travels, strong spindle power, fourth-axis capability, and production-oriented construction, the MAZAK PFH-4800 remains a useful platform in the used CNC machinery market.
WHY BUY USED MAZAK PFH-4800
Purchasing a used 2005 MAZAK PFH-4800 allows manufacturers to obtain substantial horizontal machining capability while reducing the capital investment required compared with purchasing a newer horizontal machining center. The machine’s large travels, rigid construction, powerful spindle, and fourth-axis capability make it particularly useful for manufacturers that routinely process medium and large industrial components.
One of the biggest advantages of purchasing a used PFH-4800 is its ability to handle demanding machining operations. The approximately 30 HP spindle provides considerable cutting power, while the horizontal machine configuration supports efficient chip evacuation during deep pocketing and heavy material removal.
The B-axis is another important benefit. Manufacturers can index workpieces around the rotary axis and access multiple faces without removing the component from its fixture. This can reduce setup requirements and improve positional accuracy between machining operations.
The machine’s large work envelope is also valuable. With approximately 39.4 inches of X-axis travel, 31.5 inches of Y-axis travel, and 32.5 inches of Z-axis travel, the PFH-4800 can accommodate components that may exceed the capacity of smaller horizontal machining centers.
Used PFH-4800 machines may also be available with valuable accessories such as chip conveyors, rotary tables, probing systems, high-pressure coolant, coolant-through-spindle systems, tooling packages, and automatic tool changers. These additions can reduce the cost of preparing the machine for production.
Another advantage of buying used is availability. Manufacturers can potentially locate an available machine and increase machining capacity without waiting for a new machine to be manufactured and delivered.
Before purchasing a used PFH-4800, buyers should inspect the spindle, X/Y/Z axes, B-axis, pallet, tool changer, coolant system, chip conveyor, hydraulic systems, lubrication system, and CNC control.
Spindle hours and maintenance history should be reviewed carefully. Buyers should check spindle runout, bearing condition, vibration, thermal behavior, axis backlash, ballscrew condition, rotary-axis accuracy, and overall machine geometry.
The condition of the tool changer should also be evaluated because reliable automatic tool changing is essential for production efficiency. Buyers should inspect the tool magazine, tool pockets, drawbar, tool-release mechanism, and tool-change cycle.
For manufacturers seeking a large-capacity used horizontal machining center, the MAZAK PFH-4800 can provide substantial production capability and four-axis machining flexibility at a lower acquisition cost than many newer horizontal machining centers.
HOW MUCH DOES A USED MAZAK PFH-4800 COST?
The price of a used MAZAK PFH-4800 depends on several factors including machine condition, spindle hours, control configuration, tool magazine capacity, pallet configuration, B-axis condition, installed options, maintenance history, and overall production history. Because these machines are now older production equipment, condition and service history can have a particularly significant impact on market value.
A typical used MAZAK PFH-4800 may range from approximately $25,000 to $60,000 depending on condition, configuration, accessories, location, and seller. This should be considered a general used-market range rather than a fixed valuation because individual machines can vary considerably.
Machines equipped with larger tool magazines, probing systems, chip conveyors, high-pressure coolant, coolant-through-spindle systems, rotary workholding, and complete tooling packages may command higher asking prices because they can provide greater production readiness.
Spindle condition is one of the most important considerations when evaluating a used PFH-4800. Buyers should inspect spindle bearings, runout, vibration, temperature, spindle taper condition, drawbar operation, and cutting performance.
The condition of the X, Y, and Z axes is equally important. Buyers should check ballscrew backlash, guideway condition, axis positioning accuracy, repeatability, lubrication systems, and servo operation.
The B-axis should receive additional attention because rotary-axis accuracy directly affects the machine’s four-axis machining capability. Buyers should verify indexing accuracy, clamping, backlash, and overall rotary-table condition.
Control condition can also influence value. Because a 2005 machine may have an older Mazatrol control generation, buyers should verify the control’s display, memory, communication functionality, programming capability, and availability of service support.
Transportation and installation should also be considered when calculating the total purchase cost. The PFH-4800 is a substantial industrial machine, and professional rigging, freight, electrical installation, coolant setup, and commissioning may be required.
A well-maintained PFH-4800 with good spindle condition, accurate axes, functioning B-axis, reliable tool changer, documented maintenance history, and useful production accessories can represent significantly different value from a machine requiring major refurbishment.
For manufacturers seeking a heavy-duty horizontal machining center with large travels, fourth-axis capability, and substantial spindle power, the used MAZAK PFH-4800 remains a practical option for expanding CNC machining capacity without the capital cost of new equipment.
Related Products
-
MAZAK - SLANT TURN 50N
VIEW MACHINE -
MAZAK - INTEGREX 100-IISY
VIEW MACHINE -
MAZAK - Vortex i-630V/6S
VIEW MACHINE -
MAZAK - INTEGREX I-450H ST
VIEW MACHINE