The Mazak HQR-100MSY is a compact, high-productivity twin-spindle, twin-turret CNC turning center designed for simultaneous multi-tasking operations. Part of Mazak’s Hyper Quadrex (HQR) series, it is engineered to significantly reduce cycle times by enabling synchronized machining on both spindles using upper and lower turrets. The machine features full milling capability, Y-axis functionality on both turrets, and high-speed rotary tools, allowing it to complete complex parts in a single setup. It typically includes a 6-inch chuck, up to 6000 rpm spindle speeds, and a maximum machining diameter of approximately 300 mm, making it ideal for small to medium precision components. Mazatrol SmoothG control simplifies programming through conversational interfaces while still supporting traditional G-code programming. The machine is also automation-ready, supporting bar feeders, part unloaders, and robotic integration for lights-out manufacturing. With its ability to perform balanced cutting and simultaneous front-and-back machining, the HQR-100MSY is widely used in industries such as automotive, medical, and high-volume precision engineering where cycle time reduction and accuracy are critical.
MAZAK HQR-100MSYSPECIFICATIONS
MAZAK HQR-100MSY – AXIS
Number of Axes: 6 (X1, Z1, Y1, X2, Z2, Y2 + C-axis on both spindles)
Twin spindle, twin turret configuration
Full Y-axis capability on both upper and lower turrets
Simultaneous multi-axis machining
W-axis (second spindle movement for part transfer)
Rapid Traverse (Y-axis): High-performance movement
Programmable cutting feedrates
Optimized for simultaneous machining
MAZAK HQR-100MSY – COOLANT & CHIP MANAGEMENT
Flood coolant system standard
Optional high-pressure coolant
Integrated chip conveyor
Efficient chip evacuation system
Supports long unattended machining cycles
MAZAK HQR-100MSY – CONTROL SYSTEM
Mazatrol SmoothG CNC Control
Conversational programming capability
EIA/ISO (G-code) compatibility
Advanced synchronization control for twin turrets
Easy programming for balanced cutting
MAZAK HQR-100MSY – POWER & AIR REQUIREMENTS
Power Requirement: Approx. 30–40 kVA
Voltage: 3-phase industrial supply
Air Requirement: Clean, dry compressed air
Air Pressure: Approx. 5–7 bar
MAZAK HQR-100MSY – DIMENSIONS
Machine Length: Approx. 2,300 mm
Machine Width: Approx. 2,900 mm
Machine Height: Approx. 2,400 mm
Machine Weight: Approx. 9,000–9,200 kg
MAZAK HQR-100MSY – GENERAL INFORMATION
Machine Type: Multi-tasking CNC turning center
Twin spindle, twin turret with full Y-axis
Designed for high-volume, complex parts
Enables simultaneous machining on both spindles
Ideal for lights-out manufacturing and automation
INDUSTRIES THAT USE MAZAK HQR-100MSY
Automotive manufacturing
Aerospace components
Medical device manufacturing
Electronics and precision engineering
Oil & gas components
TYPICAL PARTS MAZAK HQR-100MSY CAN PRODUCE
Complex shafts and multi-feature parts
Valve bodies and hydraulic components
Medical implants and precision fittings
Automotive transmission components
High-precision turned and milled parts
WHY CHOOSE MAZAK HQR-100MSY
Dual spindle and dual turret for maximum productivity
Full Y-axis enables complex milling operations
Reduced cycle time with simultaneous machining
High accuracy and repeatability
Advanced Mazatrol control for easy programming
Excellent for high-volume, multi-operation parts
WHY BUY USED MAZAK HQR-100MSY
Buying a used Mazak HQR-100MSY is a strategic decision for manufacturers looking to access advanced multi-tasking technology at a reduced cost. One of the biggest advantages is the significant savings compared to a new machine, while still benefiting from Mazak’s proven build quality and reliability. These machines are designed for long operational life, especially when properly maintained, making them excellent candidates for resale markets. A key advantage of the HQR series is its ability to reduce cycle time through simultaneous machining, which directly impacts productivity and return on investment.
Used machines also offer faster availability, eliminating long lead times often associated with new CNC equipment. Many pre-owned units already include high-value options such as live tooling, Y-axis capability, and automation interfaces, which would otherwise increase the cost significantly if purchased new. Evaluating cutting time is crucial when buying used; machines with lower spindle hours often provide better longevity and reliability regardless of age. Additionally, operators familiar with Mazatrol systems can quickly adapt to used machines, reducing training time. Overall, purchasing a used HQR-100MSY allows businesses to scale production, improve efficiency, and remain competitive without the financial burden of new equipment investment.
HOW MUCH DOES A USED MAZAK HQR-100MSYCOST?
The price of a used Mazak HQR-100MSY varies based on manufacturing year, condition, configuration, and especially cutting time. Machines manufactured before 2000 are relatively rare for this model due to its more modern design lineage, but early-generation multi-turret Mazak machines with similar configurations can range from $30,000 to $70,000, typically with high cutting hours and older control systems.
Machines produced between 2000 and 2010 generally fall in the range of $70,000 to $140,000. These units often provide a strong balance of affordability and performance, particularly if they have moderate cutting hours and have been well maintained. They may include earlier Mazatrol controls but still offer full twin-spindle functionality.
More recent machines from 2010 to 2025 typically range from $140,000 to $300,000 or more, depending on options such as automation integration, advanced controls, and tooling packages. Lower cutting time machines in this category command premium prices due to longer remaining service life and higher productivity potential. Ultimately, cutting hours play a critical role in valuation; a newer machine with excessive usage may be less desirable than an older unit with low cutting time, making usage history as important as age when determining cost.
