The Mazak FF-n5000/40 is a compact, high-speed horizontal machining center designed specifically for mass production environments where cycle time reduction and automation are critical. As part of Mazak’s FF series, the “n” variant focuses on a narrower machine footprint and optimized layout, making it ideal for integration into automated production lines with limited floor space. It features a 500 mm × 500 mm pallet and supports workpieces up to approximately 720 mm in diameter and 715 mm in height, slightly more compact than the standard FF-5000/40.
The machine is equipped with a BT40 spindle capable of speeds up to 12,000 RPM, with rapid acceleration (0–12,000 RPM in about 1.4 seconds), enabling high-speed machining and reduced idle time. Feed rates and acceleration are optimized for productivity, with Z-axis acceleration reaching up to 1.5G, improving drilling and tapping efficiency.
Its fixed table design enhances reliability by keeping axis drives away from chips and coolant, reducing wear and maintenance. A direct automatic tool changer and simplified structure further improve uptime. With Mazatrol SmoothC control and automation compatibility, the FF-n5000/40 is widely used in automotive and high-volume manufacturing lines requiring consistent, repeatable machining performance.
MAZAK FF-n5000/40SPECIFICATIONS
MAZAK FF-n5000/40 – AXIS
3-Axis horizontal machining center (X, Y, Z)
Optional A/B-axis indexing via pallet/fixture systems
Fixed table design for automation integration
Optimized for compact, high-speed production lines
Suitable for mass production machining
MAZAK FF-n5000/40 – AXIS TRAVELS
X-Axis Travel: Approx. 510 mm
Y-Axis Travel: Approx. 550 mm
Z-Axis Travel: Approx. 550 mm
High-speed axis acceleration for reduced cycle times
Compact travel range for efficient machining envelope
MAZAK FF-n5000/40 – CAPACITY
Pallet Size: 500 mm × 500 mm
Maximum Workpiece Diameter: Approx. 720 mm
Maximum Workpiece Height: Approx. 715 mm
Ideal for small to medium production parts
Designed for high-volume manufacturing
MAZAK FF-n5000/40 – SPINDLE
Built-in motor spindle (direct drive)
Spindle Speed: Up to 12,000 RPM
Spindle Taper: BT40 / CAT40
Fast acceleration (~1.4 sec to max speed)
High efficiency with minimal power loss
MAZAK FF-n5000/40 – TABLE
Fixed table with pallet system
High-speed NC rotary indexing table
Table indexing time approx. 1.5 sec (90°)
Designed for automated production lines
Supports robotic and multi-pallet systems
MAZAK FF-n5000/40 – TOOL TURRET
Tool Magazine Capacity: Approx. 20 tools
Direct Automatic Tool Changer (ATC)
No shifter mechanism for improved reliability
Fast and consistent tool changes
Ideal for high-frequency production cycles
MAZAK FF-n5000/40 – FEEDRATES
Rapid Traverse Rate: Up to 62 m/min
Feedrate: Approx. 62,000 mm/min
Z-axis acceleration: Up to 1.5G
Optimized for minimal non-cutting time
High-speed drilling and tapping performance
MAZAK FF-n5000/40 – COOLANT & CHIP MANAGEMENT
Efficient chip evacuation system
Coolant system designed for continuous operation
Axes protected from chips and coolant exposure
Reduced contamination for longer machine life
Suitable for unattended machining environments
MAZAK FF-n5000/40 – CONTROL SYSTEM
Mazatrol SmoothC CNC Control (standard)
Optional Fanuc 32i control
User-friendly conversational programming
Real-time monitoring and diagnostics
Designed for high-efficiency production
MAZAK FF-n5000/40 – POWER & AIR REQUIREMENTS
Power Requirement: Approx. 30–50 kVA
Compressed air required for ATC and automation
Energy-efficient motor spindle design
Suitable for continuous operation environments
MAZAK FF-n5000/40 – DIMENSIONS
Compact footprint for production lines
Space-saving design for automation cells
Machine Weight: Approx. 10,000–14,000 kg
Designed for easy integration into production systems
Requires standard industrial foundation
MAZAK FF-n5000/40 – GENERAL INFORMATION
Compact horizontal machining center for mass production
High-speed, high-productivity design
Excellent reliability with simple mechanical structure
Reduced non-cutting time improves efficiency
Ideal for automated manufacturing environments
INDUSTRIES THAT USE MAZAK FF-n5000/40
Automotive Manufacturing
OEM Production Lines
Industrial Machinery
Precision Engineering
Heavy Equipment Manufacturing
High-volume component production
TYPICAL PARTS MAZAK FF-n5000/40 CAN PRODUCE
Engine components
Transmission housings
Pump and valve bodies
Small to medium cast parts
Automotive structural components
Precision machined housings
WHY CHOOSE MAZAK FF-n5000/40
Compact design ideal for production lines
High-speed machining reduces cycle time
Reliable direct ATC system
Easy integration with automation systems
Excellent performance for mass production
Proven solution for automotive and industrial applications
WHY BUY USED MAZAK FF-n5000/40
Buying a used Mazak FF-n5000/40 is a practical solution for manufacturers focused on high-volume production while controlling capital investment. This machine is purpose-built for continuous operation, and its compact design makes it especially valuable for facilities running multiple machines in automated lines. Even after years of use, Mazak machines maintain strong reliability due to their robust construction and simplified mechanical design.
Machines from pre-2000 production-style horizontals (early equivalents) are typically lower-cost options suited for lighter production demands or backup roles. These machines often have higher cutting hours and older controls but can still perform reliably for basic operations where high-speed performance is not critical.
Units from 2000 to 2010 offer a strong balance of affordability and capability. These machines generally include improved Mazatrol controls, better spindle efficiency, and moderate cutting hours, making them suitable for consistent mid-level production environments such as automotive components or batch manufacturing.
Machines from 2010 onward are best suited for high cutting-time environments, often operating in automated systems with minimal downtime. They feature faster processing speeds, improved thermal stability, and advanced controls. For businesses running long production cycles or multiple shifts, a newer used FF-n5000/40 provides high productivity and a strong return on investment.
HOW MUCH DOES A USED MAZAK FF-n5000/40COST?
The cost of a used Mazak FF-n5000/40 varies depending on manufacturing year, cutting hours, machine condition, and whether it includes automation systems such as pallet changers or robotic loaders. Because these machines are commonly used in high-volume production lines, spindle hours and maintenance history significantly influence pricing.
Machines equivalent to pre-2000 production horizontals typically range from $25,000 to $70,000. These machines often have high cutting hours and older CNC systems, making them suitable for low-cost production or secondary operations rather than continuous high-speed machining.
Machines built between 2000 and 2010 generally fall within the $70,000 to $150,000 range. These units usually feature improved controls, better spindle performance, and moderate cutting hours, making them a strong option for mid-level production environments where reliability and cost efficiency are important.
Machines manufactured between 2010 and 2025 can range from $150,000 to $280,000 or more, particularly if they have low cutting hours, Mazatrol Smooth controls, and automation integration. These machines are optimized for high-output production and command higher prices due to their efficiency and reduced cycle times.
Cutting time remains a critical pricing factor—machines used in 24/7 production environments may show higher wear, while low-hour machines with proper maintenance records typically achieve premium resale values regardless of age.
