The Mazak Multiplex W-200Y is a high-productivity CNC turning center designed for mid- to high-volume production with advanced multi-tasking capability. It features a twin-spindle, twin-turret symmetrical design that allows simultaneous machining on both sides, significantly reducing cycle times and increasing throughput. What sets the W-200Y apart is its Y-axis capability, which enables off-center milling, drilling, and complex contour machining in a single setup.
The machine typically comes with an 8-inch chuck, a maximum machining diameter of approximately 320 mm, and a machining length of around 180 mm. It is designed for DONE-IN-ONE® machining, where parts are completely finished without requiring secondary operations. The automatic workpiece transfer system ensures seamless transition between the main and sub-spindle, improving accuracy and reducing handling time.
Equipped with Mazatrol control, the machine supports both conversational programming and G-code. Automation options such as gantry loaders and unloaders enable continuous production with minimal operator intervention. Overall, the Multiplex W-200Y is widely used in automotive, electronics, and precision engineering industries where efficiency, flexibility, and reduced cycle time are critical.
Partitioned machining zones to prevent interference
MAZAK MULTIPLEX W-200Y – CONTROL SYSTEM
Mazatrol SmoothG CNC control
Conversational programming capability
EIA/ISO (G-code) compatibility
3D Assist and Quick Mazatrol features
Advanced automation integration
MAZAK MULTIPLEX W-200Y – POWER & AIR REQUIREMENTS
Power Requirement: Approx. 30–50 kVA
Voltage: 3-phase industrial supply
Air Requirement: Clean, dry compressed air
Air Pressure: Approx. 5–7 bar
MAZAK MULTIPLEX W-200Y – DIMENSIONS
Machine Length: Approx. 3,000–4,000 mm
Machine Width: Approx. 2,000–2,800 mm
Machine Height: Approx. 2,200–2,800 mm
Machine Weight: Approx. 7,000–10,000 kg
Compact footprint for dual-machine capability
MAZAK MULTIPLEX W-200Y – GENERAL INFORMATION
Machine Type: Multi-tasking CNC turning center
Dual-spindle, dual-turret with Y-axis
Enables DONE-IN-ONE® machining
Automatic workpiece transfer between spindles
Reduces setup time and improves accuracy
Ideal for mid-to-high volume production
INDUSTRIES THAT USE MAZAK MULTIPLEX W-200Y
Automotive
Aerospace
Medical device manufacturing
Electronics
Precision engineering
TYPICAL PARTS MAZAK MULTIPLEX W-200Y CAN PRODUCE
Complex shafts
Automotive components
Hydraulic fittings
Valve components
Multi-feature precision parts
WHY CHOOSE MAZAK MULTIPLEX W-200Y
Y-axis enables complex off-center machining
Dual spindles and turrets increase productivity
Simultaneous machining reduces cycle time
DONE-IN-ONE® capability minimizes setups
High accuracy and repeatability
Proven Mazak performance for mass production
WHY BUY USED MAZAK MULTIPLEX W-200Y
Buying a used Mazak Multiplex W-200Y is a highly effective way to access advanced multi-tasking CNC technology at a significantly lower cost. One of the biggest advantages is the ability to acquire a twin-spindle, twin-turret machine with Y-axis capability without the high investment required for a new unit. Mazak machines are known for their durability and reliability, often operating efficiently for decades when properly maintained.
A major benefit of the W-200Y is its ability to perform simultaneous machining on both spindles while also handling complex milling operations using the Y-axis. This dramatically reduces cycle times and improves production efficiency. The automatic workpiece transfer system ensures seamless operation between spindles, reducing manual intervention and improving accuracy.
Used machines are typically available immediately, eliminating long lead times associated with new purchases. Many pre-owned units also come equipped with automation features such as gantry loaders, parts catchers, and tool monitoring systems, which further enhance productivity. Cutting time is one of the most important factors when evaluating a used machine; lower spindle hours generally indicate better condition and longer remaining service life. Overall, purchasing a used W-200Y allows manufacturers to increase output, reduce costs, and improve operational efficiency.
HOW MUCH DOES A USED MAZAK MULTIPLEX W-200YCOST?
The cost of a used Mazak Multiplex W-200Y depends on manufacturing year, condition, configuration, and especially cutting time. Machines built before 2000 typically range from $25,000 to $80,000. These older machines often have high cutting hours and older control systems but can still be suitable for basic production or after refurbishment.
Machines produced between 2000 and 2010 generally range from $80,000 to $180,000. These units offer a strong balance between cost and performance, particularly if they have moderate cutting time and have been well maintained. Many include upgraded Mazatrol controls and Y-axis functionality, making them suitable for more complex machining tasks.
More recent machines from 2010 to 2025 typically range from $180,000 to $350,000 or more, depending on configuration, included automation, and overall condition. Machines with low cutting time command premium pricing due to longer remaining service life and higher productivity potential.
Cutting time plays a crucial role in valuation. A newer machine with heavy usage may be less desirable than an older unit with low spindle hours. Buyers should carefully evaluate usage history, maintenance records, and included features to determine the true value of a used Multiplex W-200Y.
