USED KINGSTON CHK-3000 – 2001

The 2001 Kingston CHK-3000 is a heavy-duty CNC oil country lathe specifically designed for machining large-diameter pipe, tubular products, and long shafts used in energy, mining, and industrial applications. Manufactured by Kingston Machine Tool, the CHK-3000 combines an enormous spindle bore, rigid cast iron construction, and dependable FANUC CNC control to deliver outstanding performance in demanding environments.

The CHK-3000 is built for large workpieces that exceed the capabilities of standard CNC turning centers. With a 30-inch swing over bed and 120-inch distance between centers, the machine can accommodate long and heavy components with excellent stability. Its defining feature is the 12.5-inch through-hole spindle, which allows large pipe and tubular stock to pass directly through the spindle. This capability is especially valuable in oilfield and OCTG (Oil Country Tubular Goods) machining applications.

Typical specifications include a 24-inch front chuck, 12.5-inch spindle bore, maximum turning diameter of approximately 22 inches, and spindle speeds from 5 to 300 RPM. A 20 HP spindle motor provides high torque for threading, roughing, and finishing large steel and alloy components. Most machines are equipped with a FANUC 0T CNC control, programmable tailstock, hydraulic braking system, and steady rests.

Industries that use the KINGSTON CHK-3000 include oil and gas, pipeline manufacturing, mining, shipbuilding, power generation, and industrial repair. Typical parts include drill pipe, casing couplings, hydraulic cylinders, large shafts, and heavy tubular connectors.

The 2001 model remains highly sought after because of its rugged construction, massive spindle capacity, and ability to perform specialized oilfield machining at a fraction of the cost of newer equipment.

KINGSTON CHK-3000 – AXIS

KINGSTON CHK-3000 – AXIS TRAVELS / WORK ENVELOPE

KINGSTON CHK-3000 – CAPACITY / TABLE

KINGSTON CHK-3000 – SPINDLE

KINGSTON CHK-3000 – TOOL CHANGER

KINGSTON CHK-3000 – CONTROL SYSTEM

KINGSTON CHK-3000 – COOLANT / DUST / WATER MANAGEMENT

KINGSTON CHK-3000 – POWER REQUIREMENTS

KINGSTON CHK-3000 – DIMENSIONS

KINGSTON CHK-3000 – GENERAL INFORMATION

INDUSTRIES THAT USE KINGSTON CHK-3000

• Oil and Gas
• OCTG and Pipe Threading
• Pipeline Manufacturing
• Mining
• Shipbuilding
• Power Generation
• Heavy Equipment Manufacturing
• Industrial Repair
• Steel Service Centers
• General Heavy Machining

TYPICAL PARTS KINGSTON CHK-3000 CAN PRODUCE

• Drill Pipe
• Casing Couplings
• Tubing Connectors
• Hydraulic Cylinders
• Large Shafts
• Pump Sleeves
• Bearing Housings
• Pipe Adapters
• Roller Assemblies
• Heavy Bushings
• Flanges
• Energy Components

WHY CHOOSE KINGSTON CHK-3000

The KINGSTON CHK-3000 is purpose-built for machining large-diameter pipe and tubular products. Its 12.5-inch spindle bore and 24-inch chuck allow oversized materials to be machined efficiently without special fixtures.

The machine’s geared spindle delivers exceptional low-speed torque, making it ideal for threading and roughing alloy steel and oilfield materials. The FANUC control provides reliable CNC performance with familiar programming.

Its rigid construction, steady rests, and hydraulic brake system make the CHK-3000 an excellent solution for demanding heavy-turning applications.

WHY BUY USED KINGSTON CHK-3000

Purchasing a used KINGSTON CHK-3000 – 2001 is a highly cost-effective way to acquire specialized oil country machining capability. New machines with comparable spindle bore and bed length can cost several hundred thousand dollars.

Used machines frequently include valuable accessories such as front and rear chucks, steady rests, taper attachments, and coolant systems. These options significantly reduce setup costs and allow immediate production.

The FANUC 0T control is well known and widely supported, making maintenance and troubleshooting straightforward. Kingston machines are respected for rugged construction and long service life.

For oilfield and heavy industrial manufacturers, the used CHK-3000 offers enormous capacity, dependable operation, and excellent return on investment.

HOW MUCH DOES A USED KINGSTON CHK-3000 COST?

The price of a used KINGSTON CHK-3000 – 2001 depends on machine condition, spindle health, included accessories, and maintenance history. Recent listings for 2001 machines with 12.5-inch spindle bores and full tooling packages have been advertised at prices as low as approximately $15,900, while exceptionally well-equipped machines may command substantially more.

USED KINGSTON CHK-3000 PRICE GUIDE

NEW VS USED COST COMPARISON

Machine value is affected by spindle condition, bed wear, included steady rests, and the presence of front and rear chucks. Buyers should inspect spindle bearings, threading accuracy, and tailstock alignment before purchase.

For companies machining large pipe and tubular products, the used KINGSTON CHK-3000 offers tremendous capacity, proven durability, and outstanding overall value.