USED HAAS VF-5/40 – 2009

The HAAS VF-5/40 2009 is a large-capacity CNC Vertical Machining Center designed for milling, drilling, boring, tapping, pocketing, contouring, and precision production machining. The VF-5/40 provides significantly more working envelope than smaller VF-series models, making it particularly useful for manufacturers that need long X-axis travel and substantial table capacity while retaining the versatility of a standard 40-taper vertical machining center.

The 2009 HAAS VF-5/40 provides approximately 50″ (1,270 mm) of X-axis travel, 26″ (660 mm) of Y-axis travel, and 25″ (635 mm) of Z-axis travel. The machine uses a large approximately 54″ × 24″ table with a maximum evenly distributed table load of approximately 4,000 lbs. A typical 2009 configuration is equipped with a CAT40 spindle, 7,500 RPM spindle speed, 20 HP spindle motor, and 24+1 side-mount automatic tool changer.

The machine can also be equipped with valuable production options including a 2-speed gearbox, 300 PSI through-spindle coolant, Renishaw WIPS probing, chip auger, programmable coolant, rigid tapping, remote jog handle, spindle orientation, fourth-axis drive and wiring, macro programming, and intuitive programming functions. The standard X, Y, and Z rapid traverse rate is approximately 710 IPM, providing good positioning speed for production machining.

The HAAS VF-5/40 2009 is an excellent choice for manufacturers producing aerospace components, automotive parts, heavy equipment components, fixtures, molds, dies, industrial machinery components, large brackets, housings, and other precision parts requiring a large vertical machining envelope.

---

HAAS VF-5/40 2009 – AXIS

Specification	Value
X Axis	1,270 mm (50″)
Y Axis	660 mm (26″)
Z Axis	635 mm (25″)
Machine Configuration	CNC Vertical Machining Center
Axis Configuration	3-Axis
Fourth Axis	Option / Configuration Dependent
Fifth Axis	Configuration Dependent
Guideway Configuration	CNC Vertical Mill

---

HAAS VF-5/40 2009 – AXIS TRAVELS / WORK ENVELOPE

Specification	Value
X Axis Travel	1,270 mm (50″)
Y Axis Travel	660 mm (26″)
Z Axis Travel	635 mm (25″)
Table Length	Approximately 1,372 mm (54″)
Table Width	Approximately 610 mm (24″)
Maximum Table Load	1,814 kg (4,000 lbs)
Spindle Nose to Table	Configuration Dependent
T-Slot Width	16 mm (5/8″)
T-Slot Center Distance	Approximately 80 mm (3.15″)
Standard T-Slots	7
Fourth-Axis Capability	Option

---

HAAS VF-5/40 2009 – CAPACITY

Specification	Value
Machine Type	CNC Vertical Machining Center
Table Size	Approximately 54″ × 24″
Maximum Table Load	4,000 lbs
X-Axis Travel	50″
Y-Axis Travel	26″
Z-Axis Travel	25″
Spindle Taper	CAT40
Spindle Speed	7,500 RPM
Spindle Motor	20 HP
Tool Capacity	24+1 Tools
Number of Axes	3
Fourth Axis	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent
Rigid Tapping	Yes

---

HAAS VF-5/40 2009 – SPINDLE

Specification	Value
Main Spindle Speed	7,500 RPM
Spindle Motor	20 HP
Spindle Taper	CAT40
Spindle Configuration	Vertical
Drive System	Belt Drive / Configuration Dependent
Spindle Torque	Approximately 75 ft-lb, Configuration Dependent
2-Speed Gearbox	Option
Spindle Orientation	Equipped / Configuration Dependent
Through-Spindle Coolant	Option
Spindle Cooling	Configuration Dependent

The 7,500 RPM, 20 HP CAT40 spindle provides a useful balance between cutting power and speed for general machining of aluminum, steel, stainless steel, cast materials, plastics, and other engineering materials.

---

HAAS VF-5/40 2009 – TOOL CHANGER

Specification	Value
Tool Capacity	24+1 Tools
Tool Changer	Side-Mount Automatic Tool Changer
Tool Interface	CAT40
Tool Changer Type	Twin-Arm / Side-Mount
Maximum Tool Weight	Approximately 12 lbs
Maximum Tool Diameter	Configuration Dependent
Tool-to-Tool Time	Configuration Dependent
Chip-to-Chip Time	Configuration Dependent
Tool Management	Automatic

The 24+1 side-mount automatic tool changer provides substantial tool capacity for machining programs requiring multiple cutters, drills, taps, boring tools, and finishing tools.

---

HAAS VF-5/40 2009 – CONTROL SYSTEM

Specification	Value
CNC Control	Haas CNC Control
Control Generation	Configuration Dependent
Programming	ISO G-Code
Intuitive Programming	Equipped / Configuration Dependent
Tool Offset Management	Yes
Work Offset Management	Yes
Rigid Tapping	Equipped
Macro Programming	Equipped / Configuration Dependent
Spindle Orientation	Equipped / Configuration Dependent
Coordinate Rotation	Configuration Dependent
Scaling	Configuration Dependent
Remote Jog Handle	Equipped / Configuration Dependent
Probing	Renishaw WIPS / Configuration Dependent

The Haas control platform provides a practical programming environment for both production machining and job-shop applications.

---

HAAS VF-5/40 2009 – FEEDRATES

Specification	Value
X Rapid Traverse	710 IPM / 18 m/min
Y Rapid Traverse	710 IPM / 18 m/min
Z Rapid Traverse	710 IPM / 18 m/min
Maximum Cutting Feed	Approximately 500 IPM / 12.7 m/min
Maximum X Thrust	Approximately 2,550 lbf
Maximum Y Thrust	Approximately 4,100 lbf
Maximum Z Thrust	Approximately 4,100 lbf
Feedrate Override	Yes
Rapid Override	Yes

The approximately 710 IPM rapid-traverse rate provides efficient positioning between machining operations while maintaining the machine’s large work envelope.

---

HAAS VF-5/40 2009 – FOURTH AXIS / ROTARY CAPABILITY

Specification	Value
Fourth-Axis Drive	Option
Fourth-Axis Wiring	Option
Rotary Table	Configuration Dependent
Indexing Machining	Yes, When Equipped
Continuous Rotary Machining	Configuration Dependent
Multi-Sided Machining	Yes
Rotary Probing	Configuration Dependent
Simultaneous 4-Axis	Configuration Dependent

A VF-5/40 equipped with fourth-axis drive and wiring can be paired with a compatible Haas rotary table for indexed or continuous rotary machining.

---

HAAS VF-5/40 2009 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Standard
Coolant Tank	Configuration Dependent
Coolant Pump	Yes
Chip Auger	Option
Through-Spindle Coolant	300 PSI Option
Programmable Coolant	Option
High-Pressure Coolant	Configuration Dependent
Coolant Filtration	Configuration Dependent
Window Air Blast	Configuration Dependent
Automatic Lubrication	Yes

The chip auger and coolant options can substantially improve production efficiency, especially when the machine is used for long unattended machining cycles.

---

HAAS VF-5/40 2009 – POWER REQUIREMENTS

Specification	Value
Electrical Supply	Three Phase
Low Voltage	Approximately 220 VAC
High Voltage	Configuration Dependent
Frequency	50/60 Hz
Full Load Amps	Configuration Dependent
Air Requirement	Approximately 4 SCFM at 100 PSI
Minimum Air Pressure	Approximately 80 PSI
Connected Load	Configuration Dependent
Transformer	Configuration Dependent

---

HAAS VF-5/40 2009 – DIMENSIONS

Specification	Value
Length	Approximately 149″
Width	Approximately 114″
Height	Approximately 119″
Machine Weight	Approximately 14,000–14,600 lbs
Floor Space	Configuration Dependent
Shipping Configuration	Configuration Dependent

The large work envelope and substantial table capacity make the VF-5/40 a significantly larger machine than the smaller VF-series models.

---

HAAS VF-5/40 2009 – GENERAL INFORMATION

Item	Details
Manufacturer	Haas Automation
Model	VF-5/40
Year	2009
Machine Type	CNC Vertical Machining Center
CNC Control	Haas CNC Control
X-Axis Travel	50″
Y-Axis Travel	26″
Z-Axis Travel	25″
Table Size	Approximately 54″ × 24″
Maximum Table Load	4,000 lbs
Spindle Taper	CAT40
Spindle Speed	7,500 RPM
Spindle Motor	20 HP
Tool Capacity	24+1
Rapid Traverse	710 IPM
Maximum Cutting Feed	Approximately 500 IPM
Rigid Tapping	Yes
Through-Spindle Coolant	Configuration Dependent
Renishaw Probing	Configuration Dependent
Fourth Axis	Configuration Dependent
Chip Auger	Configuration Dependent
2-Speed Gearbox	Configuration Dependent

---

INDUSTRIES THAT USE HAAS VF-5/40 2009

The HAAS VF-5/40 2009 is well suited for industries requiring a large machining envelope and dependable CNC milling performance, including:

• Aerospace
• Automotive
• Defense
• Heavy equipment
• Energy
• Industrial machinery
• Mold and die
• Fabrication
• Hydraulic and pneumatic
• General precision manufacturing
• Job shops
• Contract manufacturing

Its 50″ X-axis travel, 26″ Y-axis travel, 25″ Z-axis travel, and 4,000 lb table capacity make it particularly useful for large fixtures, structural components, housings, plates, molds, and long machining applications.

---

TYPICAL PARTS HAAS VF-5/40 2009 CAN PRODUCE

The HAAS VF-5/40 2009 can manufacture:

• Aerospace components
• Automotive components
• Large brackets
• Machine bases
• Industrial housings
• Hydraulic components
• Pump components
• Valve components
• Fixtures
• Jigs
• Mold components
• Heavy equipment parts
• Structural components
• Large precision-machined parts

The machine can perform face milling, pocketing, drilling, boring, tapping, reaming, contouring, profiling, slotting, chamfering, engraving, and other general-purpose CNC milling operations.

---

WHY CHOOSE HAAS VF-5/40 2009

The HAAS VF-5/40 2009 is an excellent choice for manufacturers looking for a large-capacity vertical machining center with substantial axis travel and table load capability. Its 50″ X-axis, 26″ Y-axis, and 25″ Z-axis travels provide significantly more working envelope than smaller VMCs, while the CAT40 spindle keeps tooling practical and widely available.

The 4,000 lb table capacity also allows manufacturers to use substantial fixtures or workholding for larger components. The 24+1 tool changer gives production programs enough tool capacity for multiple roughing, finishing, drilling, tapping, and boring operations.

When equipped with options such as 300 PSI through-spindle coolant, Renishaw WIPS probing, chip auger, programmable coolant, rigid tapping, fourth-axis drive, and a 2-speed gearbox, the VF-5/40 becomes a flexible production platform capable of handling demanding machining requirements.

---

WHY BUY USED HAAS VF-5/40 2009

Purchasing a used HAAS VF-5/40 2009 allows manufacturers to acquire a large-capacity CNC vertical machining center while reducing the capital investment compared with purchasing a new VMC.

Many used machines may include valuable options such as:

• Haas CNC control
• 50″ X-axis travel
• 26″ Y-axis travel
• 25″ Z-axis travel
• 54″ × 24″ table
• 4,000 lb table capacity
• CAT40 spindle
• 7,500 RPM spindle
• 20 HP spindle motor
• 24+1 side-mount tool changer
• 2-speed gearbox
• Fourth-axis drive and wiring
• Chip auger
• 300 PSI through-spindle coolant
• Renishaw WIPS probing
• Programmable coolant
• Rigid tapping
• Remote jog handle
• Macro programming
• Spindle orientation
• Complete CAT40 tooling

Before purchasing, buyers should inspect the spindle, spindle bearings, CAT40 taper, drawbar, X/Y/Z-axis movement, ballscrews, guideways, automatic tool changer, Haas control, probing system, coolant system, chip auger, lubrication system, electrical cabinet, and overall machine geometry.

For a 2009 machine, spindle hours, servo hours, alarm history, maintenance records, previous crash history, tooling, and the condition of the control electronics should also be reviewed.

---

HOW MUCH DOES A USED HAAS VF-5/40 2009 COST?

The value of a used HAAS VF-5/40 2009 depends heavily on spindle hours, machine condition, spindle configuration, tool changer, fourth-axis equipment, probing, through-spindle coolant, chip-management system, tooling package, and maintenance history.

A current used example of a 2009 HAAS VF-5/40 is listed with 50″ × 26″ × 25″ travels, 20 HP spindle, 7,500 RPM spindle, 24+1 tool capacity, fourth-axis option, chip auger, 300 PSI through-spindle coolant, Renishaw probing, and other options, providing a useful reference for this model year.

For used-equipment listing purposes, a used HAAS VF-5/40 2009 can typically be expected to sell in the approximately $25,000 to $45,000 USD range, with the actual value depending heavily on condition, spindle hours, options, tooling, and location.

A low-hour machine with a healthy spindle, accurate X/Y/Z positioning, functioning 24+1 tool changer, Renishaw probing, fourth-axis capability, through-spindle coolant, chip auger, complete CAT40 tooling, and documented maintenance may command a premium. A higher-hour machine requiring spindle, ballscrew, servo, control, tool-changer, or electrical repairs may sell for considerably less.