USED HAAS DT1 2018

The 2018 Haas DT1 is a compact, high-speed 3-axis drill/tap machining center engineered for manufacturers requiring exceptional productivity, rapid spindle acceleration, and precision machining of small to medium-sized components. As part of Haas Automation’s Drill/Tap/Mill Series, the DT1 is built around a BT30 spindle platform, allowing faster acceleration and shorter tool change times than traditional 40-taper machining centers. Designed for high-volume production environments, the machine delivers outstanding performance in drilling, tapping, light milling, and precision finishing applications. It is widely used in aerospace, medical device manufacturing, electronics, automotive, precision engineering, and general contract machining where short cycle times and consistent accuracy are essential.

The 2018 model provides 20 inches of X-axis travel, 16 inches of Y-axis travel, and 15.5 inches of Z-axis travel, offering an efficient machining envelope for a broad range of production components. Built on a rigid cast-iron frame with precision linear guideways, the DT1 provides excellent structural rigidity, thermal stability, and vibration control while maintaining extremely fast axis movement. Its compact footprint allows manufacturers to install multiple machines in limited floor space, increasing overall production capacity without expanding the shop floor. The machine is capable of producing precision components in aluminum, steel, stainless steel, plastics, brass, titanium, and composite materials while maintaining exceptional repeatability and superior surface finishes.

The Haas DT1 features a 10,000 RPM inline direct-drive BT30 spindle delivering 15 HP and approximately 46 ft-lb of torque. The lightweight BT30 spindle provides rapid acceleration and deceleration, making it ideal for repetitive drilling, tapping, engraving, and light milling operations. A 20+1 side-mount automatic tool changer delivers chip-to-chip tool change times of approximately 1.6 seconds, minimizing idle time and maximizing spindle utilization during production. Combined with rapid traverse rates of 2,400 IPM, the machine significantly reduces cycle times while maintaining excellent machining accuracy.

The 2018 model comes equipped with the Haas Next Generation Control (NGC), providing faster processing speeds, improved graphics, expanded memory, Ethernet connectivity, USB ports, rigid tapping, and advanced diagnostics. Many used machines are equipped with factory-installed options such as Wireless Intuitive Probing System (WIPS), through-spindle coolant, programmable coolant nozzle, chip augers, fourth-axis preparation, and high-speed machining software. These options further improve setup efficiency, reduce production time, and increase machining flexibility for demanding manufacturing environments.

In today’s used CNC machinery market, the 2018 Haas DT1 continues to be one of the most sought-after compact drill/tap machining centers because of its dependable performance, simple maintenance, low operating costs, and excellent resale value. Whether machining aerospace brackets, medical components, electronic housings, tooling, or prototype parts, the used Haas DT1 delivers exceptional productivity and long-term reliability for manufacturers seeking a high-speed production solution.

HAAS DT1 SPECIFICATIONS

Axis

Axis Travels / Work Envelope

Table

Spindle

Tool Changer

Control System

Coolant / Chip Management

Power Requirements

Dimensions

General Information

WHY BUY USED HAAS DT1 2018

Purchasing a used 2018 Haas DT1 allows manufacturers to acquire a modern, production-proven drill/tap machining center at a significantly lower investment than purchasing new equipment. The 2018 model benefits from the Haas Next Generation Control, providing improved processing speed, enhanced graphics, expanded networking capabilities, and a more intuitive operator interface.

The machine’s BT30 spindle is specifically designed for rapid acceleration, making it ideal for repetitive drilling, tapping, engraving, and light milling operations. Combined with its ultra-fast 20+1 side-mount tool changer and 2,400 IPM rapid traverse rates, the DT1 minimizes non-cutting time and maximizes overall production efficiency.

Many used DT1 machines include valuable factory-installed options such as Wireless Intuitive Probing (WIPS), through-spindle coolant, fourth-axis wiring, chip augers, programmable coolant nozzles, and high-speed machining software. These options reduce setup times, improve machining flexibility, and increase spindle utilization throughout production.

Haas machines are well known for their dependable reliability, simple maintenance, readily available replacement parts, and extensive factory support network. A properly maintained used 2018 Haas DT1 continues to provide excellent long-term value for manufacturers focused on high-speed production.

HOW MUCH DOES A USED HAAS DT1 2018 COST?

The market value of a used 2018 Haas DT1 depends on spindle hours, machine condition, installed options, tooling packages, and maintenance history. Machines equipped with Wireless Intuitive Probing, through-spindle coolant, additional software options, and low spindle hours typically command higher resale prices.

Before purchasing, buyers should inspect spindle condition, linear guideways, lubrication system, automatic tool changer operation, coolant system, CNC diagnostics, axis backlash, and maintenance documentation. Machines with complete service records generally retain stronger resale values while providing greater long-term reliability.

A used 2018 Haas DT1 typically sells between $40,000 and $65,000, depending on spindle hours, tooling packages, installed options, maintenance history, and overall machine condition. Well-maintained machines equipped with premium factory options continue to provide outstanding return on investment for manufacturers requiring high-speed production capability.

INDUSTRIES THAT USE HAAS DT1

• Aerospace Manufacturing
• Medical Device Manufacturing
• Electronics Manufacturing
• Automotive Manufacturing
• Precision Engineering
• Mold & Die Industry
• Contract Manufacturing
• Tool & Die Manufacturing
• Defense Manufacturing
• General Manufacturing
• Educational Institutions
• Research & Development

TYPICAL PARTS HAAS DT1 CAN PRODUCE

• Aerospace Brackets
• Medical Components
• Electronic Housings
• Precision Fixtures
• Mold Inserts
• Aluminum Plates
• Hydraulic Manifolds
• Precision Connectors
• Machine Components
• Tooling Plates
• Prototype Parts
• Custom Precision Components

WHY CHOOSE HAAS DT1 2018

The 2018 Haas DT1 combines a compact footprint, high-speed BT30 inline direct-drive spindle, rapid 2,400 IPM traverse rates, an ultra-fast 20+1 side-mount automatic tool changer, and the advanced Haas Next Generation Control into one of the industry’s most productive compact drill/tap machining centers. Its lightweight spindle design and high-speed tool changes significantly reduce production cycle times while maintaining outstanding machining precision.

Manufacturers choose the Haas DT1 because of its dependable performance, modern CNC control, low operating costs, extensive service support, and excellent resale value. Whether producing precision prototypes or high-volume production components, the used 2018 Haas DT1 remains one of the best compact drill/tap machining centers available, delivering exceptional speed, accuracy, reliability, and long-term return on investment.