USED HAAS DS-30SSY – 2014
The HAAS DS-30SSY – 2014 is a dual-spindle CNC turning center with Y-axis and live tooling, designed for manufacturers that need turning, milling, drilling, and secondary operations in a single machine. The DS-30SSY combines a main spindle and secondary spindle with a Y-axis, C-axis, and driven tooling, making it suitable for complex parts that would otherwise require multiple setups.
The machine provides a substantial turning envelope with a documented 16-inch maximum turning diameter, 23-inch maximum turning length, and 31.8-inch swing. It features a 30 HP main spindle, approximately 4,500 RPM main spindle speed, and an 8-inch-class main chuck depending on configuration. The secondary spindle is rated at approximately 20 HP and can operate at up to 4,800 RPM.
One of the most important features of the DS-30SSY is its Y-axis capability. The approximately 4-inch Y-axis travel allows the machine to perform off-center milling and drilling operations, while C-axis positioning enables precise spindle orientation for driven-tool work. This makes the DS-30SSY particularly useful for components requiring flats, slots, cross-holes, radial holes, and other milled features.
The machine also incorporates a 24-station turret, live tooling, and a secondary spindle. Together, these features allow manufacturers to machine multiple features on the same component and transfer the part between spindles for additional operations.
A 2014 used example has been documented with Haas CNC control, 24-station turret, Y-axis, live tooling, tool presetter, Renishaw probing, main and sub-spindle collet chucks, chip conveyor, and parts-catching capability, although equipment varies from machine to machine.
HAAS DS-30SSY – 2014 – AXIS
| Specification | Details |
|---|---|
| Machine Type | CNC Turning Center |
| Configuration | Dual Spindle / Y Axis |
| Controlled Axes | 4+ Axis Capability |
| X Axis | Yes |
| Z Axis | Yes |
| Y Axis | Yes |
| C Axis | Yes |
| B Axis | Sub-Spindle Positioning |
| Main Spindle | Yes |
| Sub Spindle | Yes |
| Live Tooling | Yes |
| Tailstock | No |
The DS-30SSY combines X, Z and Y-axis movement with C-axis spindle positioning and a secondary spindle. This configuration provides multi-operation machining capability without requiring as many workpiece transfers.
HAAS DS-30SSY – 2014 – AXIS TRAVELS / WORK ENVELOPE
| Specification | Details |
|---|---|
| X Axis Travel | 12.5″ |
| Z Axis Travel | 23″ |
| Y Axis Travel | ±2.0″ / 4″ total |
| Maximum Turning Diameter | 16″–18″, configuration dependent |
| Maximum Turning Length | 23″ |
| Swing | 31.8″ |
| Swing Over Saddle | Approximately 20.8″ |
| Distance Between Centers | 23″ |
The Y-axis provides approximately 4 inches of total travel, allowing the machine to perform milling and drilling operations away from the spindle centerline.
HAAS DS-30SSY – 2014 – CAPACITY / CHUCK
| Specification | Details |
|---|---|
| Main Chuck | 10″ documented configuration |
| Main Chuck Alternative | 8.3″ configuration |
| Sub-Spindle Chuck | 8″–8.3″ |
| Bar Capacity | 2″–3″, configuration dependent |
| Spindle Bore | Approximately 3.5″ |
| Maximum Turning Diameter | Up to 18″ configuration dependent |
| Maximum Turning Length | 23″ |
| Workholding | Hydraulic Chuck / Collet Configuration Dependent |
Some 2014 DS-30SSY machines were configured with a 10-inch main chuck and 3-inch bar capacity, while other specifications for the model show an 8.3-inch chuck and 2-inch bar capacity. The exact workholding configuration should therefore be verified for each individual machine.
HAAS DS-30SSY – 2014 – MAIN SPINDLE
| Specification | Details |
|---|---|
| Main Spindle Motor | 30 HP |
| Main Spindle Speed | 4,500 RPM documented configuration |
| Model Rating | Up to 4,800 RPM |
| Spindle Nose | A2-6 |
| Spindle Bore | Approximately 3.5″ |
| Chuck | 10″ documented configuration |
| C Axis | Yes |
| Spindle Orientation | Yes |
The 30 HP main spindle provides the power required for heavy turning operations while also supporting C-axis positioning for live-tooling applications.
HAAS DS-30SSY – 2014 – SUB SPINDLE
| Specification | Details |
|---|---|
| Sub Spindle | Yes |
| Sub-Spindle Motor | 20 HP |
| Sub-Spindle Speed | 4,800 RPM |
| Sub-Spindle Chuck | 8″ documented configuration |
| Spindle Nose | A2-5 |
| C Axis | Yes |
| Part Transfer | Yes |
| Parts Pass-Off | Yes |
The secondary spindle allows the DS-30SSY to transfer the workpiece and perform machining on the opposite end without manually removing and repositioning the part.
This is particularly useful for components requiring front- and back-side machining.
HAAS DS-30SSY – 2014 – Y AXIS
| Specification | Details |
|---|---|
| Y Axis | Yes |
| Y Axis Travel | ±2.0″ |
| Total Y Travel | 4″ |
| Y Axis Function | Off-Center Milling / Drilling |
| C Axis | Yes |
| Live Tooling | Yes |
The Y-axis is one of the defining capabilities of the DS-30SSY. It allows driven tools to move above and below the spindle centerline, making it possible to machine features that cannot be produced with X and Z movement alone.
Typical Y-axis operations include:
- Off-center holes
- Slots
- Flats
- Keyways
- Milling pockets
- Radial drilling
- Cross drilling
- Complex milled profiles
HAAS DS-30SSY – 2014 – LIVE TOOLING
| Specification | Details |
|---|---|
| Live Tooling | Yes |
| Live Tool Speed | Up to 6,000 RPM on documented configuration |
| Live Tool Motor | Up to 20 HP configuration dependent |
| C Axis | Yes |
| Y Axis | Yes |
| Driven Tools | Yes |
| Milling | Yes |
| Drilling | Yes |
| Rigid Tapping | Yes |
The combination of live tooling, Y-axis, and C-axis allows the DS-30SSY to perform secondary milling and drilling operations directly on the turning center.
HAAS DS-30SSY – 2014 – TURRET / TOOLING
| Specification | Details |
|---|---|
| Turret Capacity | 24 Stations |
| Turret Type | Hybrid / BOT & VDI |
| Live Tooling | Yes |
| Tooling Interface | Configuration Dependent |
| Tool Presetter | Available |
| Tool Change | Automatic |
| Turret Index Time | Approximately 0.1 Second |
The 24-station turret provides enough positions for a combination of turning tools, boring bars, drills, and driven-tool holders.
HAAS DS-30SSY – 2014 – CONTROL SYSTEM
| Specification | Details |
|---|---|
| CNC Control | Haas CNC |
| Display | Color LCD |
| Programming | G-Code |
| C Axis Control | Yes |
| Y Axis Control | Yes |
| Live Tool Control | Yes |
| Rigid Tapping | Yes |
| USB | Available |
| Ethernet | Configuration Dependent |
| Probing | Renishaw Available |
The Haas control provides integrated management of the turning axes, Y-axis, C-axis, live tooling, turret, and secondary spindle.
HAAS DS-30SSY – 2014 – FEEDRATES
| Specification | Details |
|---|---|
| X Rapid Traverse | 472 IPM |
| Z Rapid Traverse | 945 IPM |
| Y Rapid Traverse | Configuration Dependent |
| Maximum Cutting Feed | Material / Tool Dependent |
| Feed Per Revolution | Programmable |
| C Axis | 360° Positioning |
A documented 2014 DS-30SSY lists 472 IPM X-axis rapid traverse and 945 IPM Z-axis rapid traverse.
HAAS DS-30SSY – 2014 – COOLANT / CHIP MANAGEMENT
| Specification | Details |
|---|---|
| Coolant System | Yes |
| Flood Coolant | Yes |
| Coolant Tank | Configuration Dependent |
| Chip Conveyor | Available |
| High-Pressure Coolant | Configuration Dependent |
| Mist Collector | Configuration Dependent |
| Chip Removal | Conveyor / Collection System |
| Automatic Coolant Management | Configuration Dependent |
Chip conveyors are commonly found on used DS-30SSY machines and are particularly useful for production environments generating large quantities of turning chips.
HAAS DS-30SSY – 2014 – PARTS CATCHER
| Specification | Details |
|---|---|
| Parts Catcher | Available |
| Application | Automatic Finished-Part Removal |
| Integration | CNC Controlled |
| Sub-Spindle | Yes |
| Bar Feeder Compatibility | Yes |
| Production Automation | Yes |
A parts catcher can allow completed components to be automatically removed from the machining area, reducing operator intervention during production runs.
HAAS DS-30SSY – 2014 – PROBING / TOOL PRESETTING
| Specification | Details |
|---|---|
| Tool Presetter | Available |
| Renishaw Probing | Available |
| Automatic Tool Measurement | Configuration Dependent |
| Workpiece Probing | Configuration Dependent |
| Tool Offset Measurement | Yes / Configuration Dependent |
Documented 2014 machines have been equipped with both tool presetters and Renishaw probing, making these useful options to look for when comparing used DS-30SSY machines.
HAAS DS-30SSY – 2014 – POWER REQUIREMENTS
| Specification | Details |
|---|---|
| Electrical Supply | Three Phase |
| Voltage | Configuration Dependent |
| Main Spindle | 30 HP |
| Sub Spindle | 20 HP |
| Live Tooling | Configuration Dependent |
| Full Load Amps | Configuration Dependent |
| Frequency | 50 / 60 Hz Configuration Dependent |
Electrical requirements should be verified from the machine’s electrical nameplate before installation.
HAAS DS-30SSY – 2014 – DIMENSIONS
| Specification | Details |
|---|---|
| Overall Length | Approximately 171″ |
| Overall Width | Approximately 90″ |
| Overall Height | Approximately 92″ |
| Machine Weight | Approximately 16,000 lb |
| Shipping / Footprint | Configuration Dependent |
A documented 2014 machine is listed at approximately 171″ × 90″ × 92″ and approximately 16,000 lb.
HAAS DS-30SSY – 2014 – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | Haas |
| Model | DS-30SSY |
| Year | 2014 |
| Machine Type | CNC Dual-Spindle Turning Center |
| Y Axis | Yes |
| C Axis | Yes |
| Sub Spindle | Yes |
| Live Tooling | Yes |
| Main Spindle Motor | 30 HP |
| Main Spindle Speed | 4,500 RPM |
| Sub-Spindle Motor | 20 HP |
| Sub-Spindle Speed | 4,800 RPM |
| Maximum Turning Diameter | Up to 18″ |
| Maximum Turning Length | 23″ |
| Swing | 31.8″ |
| Bar Capacity | Up to 3″ |
| X Travel | 12.5″ |
| Z Travel | 23″ |
| Y Travel | 4″ |
| Turret | 24 Station |
| Tailstock | No |
| CNC Control | Haas |
| Chip Conveyor | Available |
| Parts Catcher | Available |
| Tool Presetter | Available |
| Renishaw Probing | Available |
INDUSTRIES THAT USE HAAS DS-30SSY
The HAAS DS-30SSY is suitable for a wide range of manufacturing industries, including:
- Automotive
- Aerospace
- Oil and gas
- Industrial equipment
- Hydraulic equipment
- Pumps and valves
- Medical components
- General machining
- Job shops
- Precision manufacturing
- Energy equipment
- Heavy equipment
- Automation components
TYPICAL PARTS HAAS DS-30SSY CAN PRODUCE
The combination of dual spindles, Y-axis, C-axis, and live tooling allows the DS-30SSY to produce complex turned and milled components such as:
- Shafts
- Flanges
- Hubs
- Bushings
- Couplings
- Hydraulic components
- Valve components
- Pump components
- Fittings
- Adapters
- Housings
- Threaded components
- Slotted components
- Cross-drilled components
- Milled turning components
WHY CHOOSE HAAS DS-30SSY – 2014
The HAAS DS-30SSY – 2014 is a strong choice for manufacturers looking for a CNC lathe capable of performing considerably more than conventional turning.
Its biggest advantage is the combination of dual spindles, Y-axis, C-axis, and live tooling. These capabilities allow many components to be machined with turning and secondary milling operations in the same cycle.
The 30 HP main spindle provides substantial turning power, while the secondary spindle enables part transfer and back-side machining. The 24-station turret provides flexibility for multiple turning and driven-tool operations.
For shops producing complex components, the DS-30SSY can reduce setup time and improve consistency by minimizing the need to move parts between separate turning and milling machines.
WHY BUY USED HAAS DS-30SSY – 2014
Buying a used HAAS DS-30SSY – 2014 can provide access to a highly capable multi-function turning center at a substantially lower cost than purchasing a comparable new machine.
Important advantages include:
- Dual-spindle configuration
- Y-axis machining
- C-axis capability
- Live tooling
- 30 HP main spindle
- 20 HP sub-spindle
- Up to 4,500 RPM main spindle
- 4,800 RPM sub-spindle
- Up to 3″ bar capacity
- 23″ turning length
- Up to 18″ turning diameter
- 24-station turret
- Haas CNC control
- Parts catcher availability
- Tool presetter availability
- Renishaw probing availability
- Chip conveyor availability
When purchasing a used DS-30SSY, inspect the main spindle, sub-spindle, chuck jaws, turret indexing, live tooling, Y-axis ballscrew, X/Z ballscrews, linear guides, C-axis positioning, spindle bearings, hydraulic system, coolant system, chip conveyor, CNC control, probing system, and electrical cabinet.
Machine hours, spindle hours, maintenance records, tooling included, and whether the machine can be demonstrated under power should also be considered.
HOW MUCH DOES A USED HAAS DS-30SSY – 2014 COST?
The price of a used HAAS DS-30SSY – 2014 varies significantly depending on machine condition, hours, options, tooling, and location.
Recent used-machine records show 2014 DS-30SSY machines offered at approximately $86,500 to $119,900 USD, demonstrating the range that can exist between different machines and configurations.
A reasonable working market range for a used HAAS DS-30SSY – 2014 is approximately $75,000–$120,000 USD.
Machines toward the higher end of the range are more likely to have desirable options such as:
- Low spindle hours
- Low cutting hours
- 24-station turret
- Y-axis
- Live tooling
- Sub-spindle
- Bar feeder
- Parts catcher
- Chip conveyor
- Tool presetter
- Renishaw probing
- Additional tooling
- Good maintenance history
- Machine currently under power
The final selling price should always be evaluated based on the actual machine configuration, condition, operating hours, spindle condition, tooling package, included accessories, and service history.
Related Products
-
HAAS - VF7/40
VIEW MACHINE -
HAAS - DT1
VIEW MACHINE -
HAAS - VM2
VIEW MACHINE -
HAAS - TL1P Production Toolroom Lathe
VIEW MACHINE