USED HAAS DM-2 – 2021
The HAAS DM-2 2021 is a compact, high-speed CNC Vertical Machining Center designed for drilling, milling, tapping, pocketing, contouring, and high-volume precision production. The DM-2 combines a 40-taper inline direct-drive spindle, fast linear-axis movement, 18+1 automatic tool changer, and a compact footprint, making it particularly useful for manufacturers that need high productivity without taking up the floor space of a larger vertical machining center.
The 2021 HAAS DM-2 provides approximately 28″ (711 mm) of X-axis travel, 16″ (406 mm) of Y-axis travel, and 15.5″ (394 mm) of Z-axis travel. Its 34″ × 15″ (864 × 381 mm) worktable is suitable for fixtures, vises, smaller production components, and multiple-part setups. The machine is commonly configured with a 15,000 RPM inline direct-drive spindle, 15 HP spindle motor, CAT40 tooling, and an 18+1 side-mount automatic tool changer.
The machine provides exceptionally fast axis movement, with rapid traverse rates of approximately 2,400 IPM (61 m/min) on X, Y, and Z, while maximum cutting feed can reach approximately 1,200 IPM (30.5 m/min). Typical 2021 machines use the Haas Next Generation Control and may include wireless probing, fourth-axis wiring, rigid tapping, high-speed machining, chip auger, programmable coolant, through-spindle coolant preparation, oil skimmer, and other production options.
The HAAS DM-2 2021 is an excellent choice for manufacturers producing small and medium-sized aerospace components, automotive parts, fixtures, medical components, electronic housings, precision brackets, tooling, and other parts where rapid cycle times and repeatable CNC performance are important.
HAAS DM-2 2021 – AXIS
| Specification | Value |
|---|---|
| X Axis | 711 mm (28″) |
| Y Axis | 406 mm (16″) |
| Z Axis | 394 mm (15.5″) |
| Machine Configuration | CNC Vertical Drill/Mill Center |
| Axis Configuration | 3-Axis |
| Fourth Axis | Configuration Dependent |
| Guideway Configuration | Linear |
| Spindle Position | Vertical |
HAAS DM-2 2021 – AXIS TRAVELS / WORK ENVELOPE
| Specification | Value |
|---|---|
| X Axis Travel | 28″ (711 mm) |
| Y Axis Travel | 16″ (406 mm) |
| Z Axis Travel | 15.5″ (394 mm) |
| Spindle Nose to Table – Maximum | Approximately 21.5″ (546 mm) |
| Spindle Nose to Table – Minimum | Approximately 6″ (152 mm) |
| Table Length | 34″ (864 mm) |
| Table Width | 15″ (381 mm) |
| T-Slot Width | Approximately 5/8″ (16 mm) |
| T-Slot Center Distance | Approximately 4.92″ (125 mm) |
| Standard T-Slots | 3 |
| Maximum Table Load | Approximately 250–500 lbs, Depending on Rapid-Traverse Conditions |
HAAS DM-2 2021 – CAPACITY
| Specification | Value |
|---|---|
| Machine Type | CNC Vertical Drill/Mill Center |
| Table Size | 34″ × 15″ |
| Maximum Table Load | Approximately 500 lbs |
| X-Axis Travel | 28″ |
| Y-Axis Travel | 16″ |
| Z-Axis Travel | 15.5″ |
| Spindle Taper | CAT40 / BT40 |
| Standard Spindle Speed | 15,000 RPM Configuration |
| Standard Spindle Power | 15 HP |
| Tool Capacity | 18+1 Tools |
| Number of Axes | 3 |
| Fourth Axis | Configuration Dependent |
| Rigid Tapping | Yes |
| High-Speed Machining | Yes |
HAAS DM-2 2021 – SPINDLE
| Specification | Value |
|---|---|
| Main Spindle Speed | 15,000 RPM |
| Spindle Motor | 15 HP / 11.2 kW |
| Spindle Taper | CAT40 / BT40 |
| Maximum Torque | Approximately 46 ft-lb at 1,700 RPM |
| Drive System | Inline Direct Drive |
| Bearing Lubrication | Air / Oil Injection |
| Spindle Cooling | Air Cooled |
| Spindle Orientation | Yes |
| Rigid Tapping | Yes |
| High-Speed Machining | Yes |
The 15,000 RPM inline direct-drive spindle provides the speed required for drilling, small-tool milling, aluminum machining, finishing, and high-productivity production cycles while maintaining the versatility of 40-taper tooling.
HAAS DM-2 2021 – TOOL CHANGER
| Specification | Value |
|---|---|
| Tool Capacity | 18+1 Tools |
| Tool Changer | Side-Mount Automatic Tool Changer |
| Tool Interface | CAT40 / BT40 |
| Maximum Tool Diameter | Approximately 2.5″ (64 mm) |
| Maximum Tool Length | Approximately 7″ (178 mm) |
| Maximum Tool Weight | Approximately 12 lbs (5.4 kg) |
| Tool-to-Tool Time | Approximately 1.75 sec |
| Chip-to-Chip Time | Approximately 2.0 sec |
| Tool Management | Automatic |
The fast side-mount tool changer minimizes non-cutting time and allows multiple drills, end mills, taps, boring tools, and finishing tools to remain available during production.
HAAS DM-2 2021 – FEEDRATES
| Specification | Value |
|---|---|
| X Rapid Traverse | 2,400 IPM / 61 m/min |
| Y Rapid Traverse | 2,400 IPM / 61 m/min |
| Z Rapid Traverse | 2,400 IPM / 61 m/min |
| Maximum Cutting Feed | 1,200 IPM / 30.5 m/min |
| X Maximum Thrust | Approximately 2,550 lbf |
| Y Maximum Thrust | Approximately 2,550 lbf |
| Z Maximum Thrust | Approximately 4,200 lbf |
| Feedrate Override | Yes |
| Rapid Override | Yes |
The very high rapid-traverse rates are one of the DM-2’s major advantages, allowing fast movement between holes, pockets, contours, and machining locations.
HAAS DM-2 2021 – CONTROL SYSTEM
| Specification | Value |
|---|---|
| CNC Control | Haas Next Generation Control |
| Programming | ISO G-Code |
| Conversational Functions | Available |
| Tool Offset Management | Yes |
| Work Offset Management | Yes |
| Rigid Tapping | Yes |
| High-Speed Machining | Yes |
| Ethernet | Yes |
| Wi-Fi | Yes |
| HaasConnect | Yes |
| HaasDrop | Yes |
| Advanced Tool Management | Yes |
| Program Memory | 1 GB Standard |
| Safe Run | Yes |
| Media Display | Yes |
The Haas Next Generation Control provides a modern operator interface and supports networking, tool management, remote monitoring, program transfer, and high-speed machining functions.
HAAS DM-2 2021 – FOURTH AXIS / ROTARY CAPABILITY
| Specification | Details |
|---|---|
| Fourth-Axis Capability | Configuration Dependent |
| Fourth-Axis Wiring | Available |
| Rotary Table | Optional |
| Simultaneous 4-Axis Machining | Configuration Dependent |
| Rotary Indexing | Yes |
| Multi-Sided Machining | Yes |
| Probing | Configuration Dependent |
Machines equipped with fourth-axis wiring and a compatible rotary table can perform indexed or continuous rotary machining, expanding the DM-2’s capability for cylindrical and multi-sided components.
HAAS DM-2 2021 – COOLANT / CHIP MANAGEMENT
| Specification | Value |
|---|---|
| Flood Coolant | Standard |
| Coolant Tank | 55 Gallons / 208 L |
| Coolant Pump | Standard |
| Variable Flow Coolant | Yes |
| Chip Auger | Configuration Dependent |
| Through-Spindle Coolant | Configuration Dependent |
| High-Pressure Coolant | Option |
| Oil Skimmer | Configuration Dependent |
| Washdown | Configuration Dependent |
| Automatic Lubrication | Yes |
The compact machine enclosure combined with coolant and chip-management equipment helps maintain clean machining conditions during high-volume production.
HAAS DM-2 2021 – POWER REQUIREMENTS
| Specification | Value |
|---|---|
| Electrical Supply | Three Phase |
| Standard Voltage | 220 VAC |
| Optional High Voltage | 440 VAC |
| Low-Voltage Full Load Amps | Approximately 40 A |
| High-Voltage Full Load Amps | Approximately 20 A |
| Air Requirement | 4 SCFM at 100 PSI |
| Minimum Air Pressure | 80 PSI |
| Connected Load | Configuration Dependent |
| Transformer | Configuration Dependent |
HAAS DM-2 2021 – DIMENSIONS
| Specification | Value |
|---|---|
| Shipping Length | Approximately 91″ |
| Shipping Width | Approximately 100″ |
| Shipping Height | Approximately 98″ |
| Machine Weight | Approximately 5,350 lbs |
| Approximate Metric Weight | 2,427 kg |
| Floor Space | Configuration Dependent |
The compact footprint is one of the major advantages of the DM-2, particularly for shops where production capacity must be increased without dedicating a large amount of additional floor space.
HAAS DM-2 2021 – GENERAL INFORMATION
| Item | Details |
|---|---|
| Manufacturer | Haas Automation |
| Model | DM-2 |
| Year | 2021 |
| Machine Type | CNC Vertical Drill/Mill Center |
| CNC Control | Haas Next Generation Control |
| X-Axis Travel | 28″ |
| Y-Axis Travel | 16″ |
| Z-Axis Travel | 15.5″ |
| Table Size | 34″ × 15″ |
| Spindle Taper | CAT40 / BT40 |
| Spindle Speed | 15,000 RPM Configuration |
| Spindle Motor | 15 HP |
| Maximum Torque | Approximately 46 ft-lb |
| Tool Capacity | 18+1 |
| X/Y/Z Rapid Traverse | 2,400 IPM |
| Maximum Cutting Feed | 1,200 IPM |
| Rigid Tapping | Yes |
| High-Speed Machining | Yes |
| Fourth Axis | Configuration Dependent |
| WIPS Probing | Configuration Dependent |
| Chip Auger | Configuration Dependent |
| Through-Spindle Coolant | Configuration Dependent |
| Oil Skimmer | Configuration Dependent |
INDUSTRIES THAT USE HAAS DM-2 2021
The HAAS DM-2 2021 is well suited for industries requiring fast and repeatable CNC machining of small- and medium-sized components, including:
- Aerospace
- Automotive
- Medical
- Electronics
- Defense
- Robotics
- Industrial machinery
- Precision engineering
- Tool and die
- General manufacturing
- Job shops
- Contract manufacturing
Its high-speed spindle and extremely fast rapid movement make it particularly effective for high-volume drilling, tapping, pocketing, and contouring operations.
TYPICAL PARTS HAAS DM-2 2021 CAN PRODUCE
The HAAS DM-2 2021 can manufacture:
- Aerospace brackets
- Automotive components
- Medical components
- Electronic housings
- Precision fixtures
- Mounting plates
- Small mold components
- Tooling components
- Hydraulic components
- Robotics components
- Precision brackets
- Prototype parts
- Small mechanical housings
The machine can perform face milling, pocket milling, drilling, tapping, boring, reaming, contouring, profiling, chamfering, engraving, and high-speed finishing.
WHY CHOOSE HAAS DM-2 2021
The HAAS DM-2 2021 is an excellent choice for manufacturers looking for a compact, high-speed CNC machining center that delivers production-level performance without requiring the floor space of a larger VMC.
Its 28″ X-axis travel, 16″ Y-axis travel, 15.5″ Z-axis travel, 15,000 RPM spindle, and 18+1 tool changer provide a strong combination of speed, tooling flexibility, and machining capacity.
The 2,400 IPM rapid traverse rate on all three axes is especially valuable for production programs containing large numbers of holes, short toolpaths, and frequent axis movements. The inline direct-drive spindle also supports high-speed cutting and finishing operations.
The DM-2’s compact footprint makes it a particularly attractive option for job shops and manufacturers that need to increase machining capacity while keeping floor-space requirements under control.
WHY BUY USED HAAS DM-2 2021
Purchasing a used HAAS DM-2 2021 allows manufacturers to acquire a relatively modern high-speed CNC machining center while reducing the capital investment compared with purchasing new equipment.
Many used machines may include valuable options such as:
- Haas Next Generation Control
- 15,000 RPM spindle
- 15 HP spindle motor
- CAT40 tooling
- 18+1 side-mount ATC
- Wireless Intuitive Probing System
- Fourth-axis wiring
- Rotary-table capability
- Chip auger
- Through-spindle coolant preparation
- Programmable coolant
- Oil skimmer
- Rigid tapping
- High-speed machining
- HaasConnect
- HaasDrop
- Ethernet
- Wi-Fi
- Advanced Tool Management
Before purchasing, buyers should inspect the spindle, spindle bearings, CAT40 taper, drawbar, X/Y/Z axis movement, ballscrews, linear guides, automatic tool changer, Haas Next Generation Control, probing system, coolant system, chip auger, lubrication system, electrical cabinet, and overall machine geometry.
Spindle hours, cutting hours, alarm history, previous crash history, maintenance records, tooling, and rotary equipment should also be reviewed.
HOW MUCH DOES A USED HAAS DM-2 2021 COST?
The value of a used HAAS DM-2 2021 depends on spindle hours, machine condition, spindle speed, tool changer condition, probing equipment, fourth-axis capability, coolant configuration, tooling package, and maintenance history.
Recent used-market listings for 2021 DM-2 machines have been around $59,900 to $63,500 USD, with equipped examples featuring options such as 15,000 RPM spindles, probing, chip auger, and fourth-axis equipment. This makes approximately $55,000 to $70,000 USD a reasonable working range for a clean 2021 machine, depending heavily on hours, options, tooling, and location.
A low-hour machine with 15,000 RPM spindle, WIPS probing, fourth-axis wiring, chip auger, through-spindle coolant preparation, oil skimmer, complete CAT40 tooling, and documented maintenance can command a premium. A machine requiring spindle, ballscrew, servo, control, or electrical repairs may sell for considerably less.
Before establishing the final selling price, buyers should verify spindle hours, cutting hours, spindle runout, bearing condition, CAT40 taper condition, drawbar force, X/Y/Z-axis accuracy, ballscrew backlash, linear-guide condition, ATC operation, Haas control functionality, probing accuracy, coolant pressure, chip auger operation, lubrication system, electrical condition, rotary-axis equipment, tooling inventory, and overall machine geometry.
Related Products
-
HAAS - TM1
VIEW MACHINE -
HAAS - VF4
VIEW MACHINE -
HAAS - VF7SS
VIEW MACHINE -
HAAS - Super Mini Mill
VIEW MACHINE