USED DN SOLUTIONS SVM 5100L – 2025

The DN SOLUTIONS SVM 5100L – 2025 is a large-format CNC vertical machining center designed for high-productivity machining of medium and large workpieces. It is part of DN Solutions’ SVM series, which focuses on high acceleration and deceleration rates, reduced non-cutting time, direct-coupled spindle performance, and stable high-speed machining.

The SVM 5100L provides 50 inches of X-axis travel, 20 inches of Y-axis travel, and 20 inches of Z-axis travel, giving it a substantially larger X-axis machining envelope than the SVM 4100. The machine has a 52 x 20-inch table and supports workpieces weighing up to approximately 1,764 lbs. DN Solutions specifies rapid traverse rates of approximately 1,417 IPM on all three linear axes.

The standard machine uses an ISO #40 spindle with a maximum speed of approximately 12,000 RPM, while the spindle motor is rated at 25 HP (18.5 kW) with approximately 70 ft-lb of torque. The SVM 5100L is also available with a 30-tool automatic tool changer, CAT 40 BIG-PLUS spindle, through-spindle coolant, and FANUC 0i-Plus control with iHMI, making it well suited to demanding production environments.

---

DN SOLUTIONS SVM 5100L – 2025 – AXIS

Specification	Details
Machine Type	CNC Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	50″ / 1,270 mm
Y-Axis Travel	20″ / 510 mm
Z-Axis Travel	20″ / 510 mm
CNC Interpolation	3-Axis
4th-Axis Capability	Optional
5th-Axis Capability	Optional
Rotary Integration	Available
Rigid Tapping	Available
Spindle Orientation	Standard

DN Solutions officially lists 1,270 mm X, 510 mm Y, and 510 mm Z travel for the SVM 5100L.

---

DN SOLUTIONS SVM 5100L – 2025 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	50″ / 1,270 mm
Y-Axis Travel	20″ / 510 mm
Z-Axis Travel	20″ / 510 mm
Work Envelope	Approx. 50″ x 20″ x 20″
Spindle Nose to Table	Configuration Dependent
Table Length	52″ / 1,320 mm
Table Width	20″ / 510 mm
Maximum Workpiece Weight	1,764 lbs / 800 kg

The large X-axis travel makes the SVM 5100L particularly useful for long components, multiple fixtures, and production work requiring several parts to be machined on one table.

---

DN SOLUTIONS SVM 5100L – 2025 – CAPACITY / TABLE

Specification	Details
Table Length	52″ / 1,320 mm
Table Width	20″ / 510 mm
Maximum Workpiece Weight	1,764 lbs / 800 kg
Table Type	Fixed T-Slot
Workholding	Vise / Fixture / Rotary
4th-Axis Integration	Optional
Production Fixtures	Supported
Multiple Vises	Supported
Long Workpieces	Supported

The table’s approximately 800 kg load capacity provides sufficient capacity for substantial workpieces and production fixtures.

---

DN SOLUTIONS SVM 5100L – 2025 – SPINDLE

Specification	Details
Spindle Type	Direct-Coupled
Spindle Taper	ISO #40 / 7/24 Taper
Maximum Spindle Speed	12,000 RPM
Spindle Motor	25 HP / 18.5 kW
Maximum Torque	Approx. 70 ft-lb / 95.5 N·m
Drive System	Direct Coupled
Spindle Orientation	Standard
Rigid Tapping	Available
Through-Spindle Coolant	Available
BIG-PLUS	Available / Configuration Dependent

The SVM 5100L’s direct-coupled spindle is designed to reduce thermal displacement and provide rapid acceleration and deceleration. DN Solutions lists a 12,000 RPM maximum speed and 18.5 kW spindle motor.

---

DN SOLUTIONS SVM 5100L – 2025 – TOOL CHANGER

Specification	Details
Tool Changer Type	Double-Arm Automatic Tool Changer
Standard Tool Capacity	30 Tools
Tool Taper	ISO #40 / CAT 40
BIG-PLUS	Available
Automatic Tool Change	Standard
Tool Management	CNC Controlled
Toolholders	40-Taper
Tool Storage	30 Stations
Production Capability	Multi-Operation
Tool Change	Automatic

The SVM 5100L can be equipped with a 30-tool double-arm ATC, making it suitable for machining programs requiring numerous cutting tools.

---

DN SOLUTIONS SVM 5100L – 2025 – CONTROL SYSTEM

Specification	Details
CNC Control	FANUC 0i-Plus
Interface	iHMI
Display	Touchscreen Interface
Programming	G-Code / Conversational
Conversational Programming	Available
Tool Offset Management	Standard
Work Offset Management	Standard
Rigid Tapping	Available
High-Speed Machining	Available
AICC II	Standard
Nano Interpolation	Standard
Diagnostics	Standard
Ethernet	Available
USB	Available

The FANUC 0i-Plus control with iHMI touchscreen interface is offered as a standard control configuration, with AICC II and nano interpolation designed to improve high-speed contouring and surface finish.

---

DN SOLUTIONS SVM 5100L – 2025 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	1,417 IPM / 36 m/min
Y-Axis Rapid Traverse	1,417 IPM / 36 m/min
Z-Axis Rapid Traverse	1,417 IPM / 36 m/min
Maximum Cutting Feedrate	Configuration Dependent
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes
High-Speed Machining	Standard
High-Speed Interpolation	Available

The SVM 5100L provides approximately 36 m/min rapid traverse on X, Y, and Z, helping reduce non-cutting time during production cycles.

---

DN SOLUTIONS SVM 5100L – 2025 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Standard
Coolant Pump	Standard
Coolant Tank	Standard
Through-Spindle Coolant	Available / Standard Configuration
High-Pressure Coolant	Available
Chip Conveyor	Optional
Chip Auger	Available
Coolant Filtration	Configuration Dependent
Mist Collector	Optional
Programmable Coolant	Available

The SVM 5100L can be equipped with through-spindle coolant and chip-management systems for production machining. Through-spindle coolant is highlighted among the machine’s standard features in DN Solutions’ product information.

---

DN SOLUTIONS SVM 5100L – 2025 – AUTOMATION / PROBING

Specification	Details
Automatic Tool Changer	Standard
Work Probe	Optional
Tool Probe	Optional
Wireless Probing	Available
4th-Axis Drive	Optional
4th-Axis Ready	Configuration Dependent
Rotary Table Integration	Available
Automatic Tool Measurement	Available
Production Automation	Available
Pallet Automation	Configuration Dependent

The machine can be configured with probing and rotary-axis equipment to reduce setup time and expand its machining capabilities.

---

DN SOLUTIONS SVM 5100L – 2025 – POWER REQUIREMENTS

Specification	Details
Spindle Motor	25 HP / 18.5 kW
Electrical Service	Industrial Three-Phase
Input Voltage	Configuration Dependent
Shop Air	Required
Electrical Cabinet	FANUC / DN Solutions
Power Requirements	Machine Specific
Installation	Industrial
Transformer	Configuration Dependent

Electrical requirements should be confirmed from the specific machine documentation and installed options before installation.

---

DN SOLUTIONS SVM 5100L – 2025 – DIMENSIONS

Specification	Details
Approximate Machine Length	122″ / 3,100 mm
Approximate Machine Height	106″ / 2,681 mm
Approximate Machine Width	87″ / 2,210 mm
Machine Weight	14,330 lbs / 6,500 kg
Floor Space	Large VMC
Installation	Industrial
Rigging	Required
Chip Conveyor	Adds Overall Length

DN Solutions lists the SVM 5100L at approximately 3,100 mm long, 2,681 mm high, 2,210 mm wide, and 6,500 kg.

---

DN SOLUTIONS SVM 5100L – 2025 – GENERAL INFORMATION

Specification	Details
Manufacturer	DN Solutions
Model	SVM 5100L
Year	2025
Machine Category	Vertical Machining Center
Machine Type	CNC VMC
Axis Configuration	3-Axis
X-Axis Travel	50″
Y-Axis Travel	20″
Z-Axis Travel	20″
Table Size	52″ x 20″
Maximum Workpiece Weight	1,764 lbs
Spindle Speed	12,000 RPM
Spindle Power	25 HP
Spindle Torque	Approx. 70 ft-lb
Spindle Taper	ISO #40
Tool Changer	Double-Arm ATC
Tool Capacity	30
CNC Control	FANUC 0i-Plus / iHMI
Rapid Traverse	1,417 IPM
4th-Axis Capability	Optional
Through-Spindle Coolant	Available
Machine Weight	Approx. 14,330 lbs

---

INDUSTRIES THAT USE DN SOLUTIONS SVM 5100L

The DN SOLUTIONS SVM 5100L is suitable for:

• Aerospace
• Automotive
• Defense
• Energy
• Heavy equipment
• General machine shops
• Contract manufacturing
• Precision engineering
• Industrial machinery
• Tool and die
• Job shops
• Production machining
• Large component manufacturing
• Fabricated machinery

---

TYPICAL PARTS DN SOLUTIONS SVM 5100L CAN PRODUCE

The SVM 5100L can produce:

• Large brackets
• Mounting plates
• Machine bases
• Housings
• Fixtures
• Jigs
• Flanges
• Structural components
• Aerospace components
• Automotive components
• Industrial machinery components
• Heavy equipment components
• Precision tooling
• Custom production parts

Typical operations include face milling, pocketing, contouring, drilling, boring, tapping, reaming, slotting, thread milling, and 3-axis profiling.

---

WHY CHOOSE DN SOLUTIONS SVM 5100L

The primary advantage of the DN SOLUTIONS SVM 5100L is its combination of 50-inch X-axis travel, high-speed spindle performance, large table capacity, and rapid axis acceleration.

The 50-inch X travel makes the machine especially useful for long components and multiple-workpiece production setups. Its 52 x 20-inch table supports workpieces up to approximately 1,764 lbs, providing substantially more capacity than compact VMC platforms.

The 25 HP, 12,000 RPM direct-coupled spindle gives the machine a useful balance of cutting power and high-speed machining capability. The direct-coupled design also contributes to spindle reliability and reduced thermal displacement.

Another significant advantage is the machine’s production-oriented standard equipment. Depending on configuration, the SVM 5100L can include CAT 40 BIG-PLUS, through-spindle coolant, a 30-tool double-arm ATC, FANUC 0i-Plus with iHMI, AICC II, and nano interpolation.

---

WHY BUY USED DN SOLUTIONS SVM 5100L – 2025

A 2025 DN SOLUTIONS SVM 5100L is an exceptionally new used CNC machine. For a buyer, this can provide the opportunity to obtain a nearly new large-format VMC while potentially paying less than the cost of a factory-new machine.

Because the machine is only a year old, buyers should place particular emphasis on power-on hours, cutting hours, spindle hours, warranty status, original purchase documentation, and the installed options.

A 2025 machine should generally have minimal mechanical wear, but the buyer should still inspect the spindle, linear guides, ballscrews, table, way covers, ATC, coolant system, lubrication system, electrical cabinet, and CNC control.

The most important checks include spindle runout, spindle noise, axis backlash, positioning accuracy, tool changer operation, coolant pressure, control alarms, and evidence of crashes.

Options can make a significant difference in resale value. A machine equipped with 30-tool ATC, BIG-PLUS spindle, through-spindle coolant, high-pressure coolant, chip conveyor, probing, and 4th-axis preparation will generally be more desirable than a basic configuration.

---

HOW MUCH DOES A USED DN SOLUTIONS SVM 5100L – 2025 COST?

Because the SVM 5100L is a relatively recent DN Solutions model, public used-market data for specifically 2025-year machines is limited. Therefore, the following should be treated as an estimated inventory valuation, rather than a verified transaction price.

For a 2025 machine, I would use:

USED DN SOLUTIONS SVM 5100L – 2025 PRICE RANGE	ESTIMATED COST
Higher Hours / Basic Configuration	$90,000 – $105,000
Functional Used Machine	$105,000 – $120,000
Good Condition / Production Ready	$120,000 – $135,000
Excellent / Well Equipped	$135,000 – $150,000
Very Low Hours / Premium Configuration	$150,000 – $165,000+

For a 2025 DN SOLUTIONS SVM 5100L in excellent working condition, I would estimate approximately $120,000–$150,000 USD.

For your inventory listing, I would recommend a practical asking-price range of $135,000–$150,000 USD for a clean, low-hour machine with desirable production options.

A machine with very low hours, 30-tool ATC, BIG-PLUS, through-spindle coolant, high-pressure coolant, probing, chip conveyor, and 4th-axis capability could potentially command $150,000–$165,000+.

A higher-hour base configuration could fall closer to $100,000–$120,000.

Best estimated listing value: $135,000–$150,000 USD.