USED DMG MORI DMP 35

The DMG MORI DMP 35 is a compact, high-speed vertical machining center designed for ultra-productive machining in small footprints. It is part of the DMP series, which focuses on combining high dynamics, precision, and automation readiness for mass production and precision component manufacturing. The machine offers axis travels of approximately 350 mm (X), 420 mm (Y), and 380 mm (Z), making it ideal for small, high-precision parts used in industries such as medical technology, automotive components, electronics, and fine mechanical engineering.

A major strength of the DMP 35 is its extremely compact footprint of only around 3.15 m², allowing it to be installed in very tight production environments without sacrificing performance. Despite its size, it delivers very high dynamics, with rapid traverse rates up to 60 m/min and acceleration up to 2 g, which significantly reduces non-cutting time and improves overall productivity.

The machine is equipped with high-speed spindle options, typically a 15,000 rpm inline spindle as standard, with an optional 24,000 rpm spindle for high-precision finishing applications. This makes it highly suitable for both aluminum and tougher materials like titanium when required in medical or precision engineering sectors.

Another key feature is its focus on automation. The DMP 35 is designed for seamless integration with pallet handling systems such as WH cells, enabling high-volume unattended production. Tool change times are extremely fast, with chip-to-chip times around 1.5 seconds, which directly increases cutting efficiency in production environments.

The machine also uses advanced thermal stability systems, direct scale feedback, and rigid guideway construction to maintain precision over long production cycles. Combined with DMG MORI’s MAPPS and Siemens control systems, it provides strong usability, simulation capabilities, and production optimization tools. Overall, the DMP 35 is a high-efficiency, compact machining center built for speed, automation, and continuous production environments.

DMG MORI DMP 35 SPECIFICATIONS

WHY BUY USED DMG MORI DMP 35

Buying a used DMG MORI DMP 35 is a strong decision for manufacturers focused on high-volume production of small precision parts at low per-unit cost. One of the biggest advantages is depreciation. Since the machine is designed for mass production environments, its value reduces significantly after a few years of operation, allowing buyers to access high-speed automation technology at a much lower investment.

Another key advantage is cutting time efficiency. The DMP 35 is built for extremely fast cycle times with rapid axis movements and very short chip-to-chip times. Even used machines retain excellent dynamic performance if properly maintained. In production environments, this translates directly into lower cycle times and higher output per shift, improving overall profitability.

Durability is also an important factor. The machine is designed for continuous operation rather than heavy cutting loads. Its rigid compact structure and high-quality linear systems ensure stable performance over long production runs. Machines with moderate cutting time (typically under 15,000–25,000 spindle hours) generally still perform very reliably in industrial production. Even higher-hour machines can remain usable, but spindle and automation system wear should be carefully evaluated.

Another major benefit is automation readiness. Many used DMP 35 machines come equipped with pallet changers, chip conveyors, and integration options for robotic handling systems. This allows manufacturers to quickly deploy the machine into automated production lines without heavy additional investment.

Cutting time is more important than manufacturing year when evaluating value. A lower-hour older machine can outperform a newer high-hour unit in real production stability. For manufacturers focused on ROI, automation, and fast cycle production, a used DMP 35 offers excellent efficiency and compact high-performance capability.

HOW MUCH DOES A USED DMG MORI DMP 35 COST?

The cost of a used DMG MORI DMP 35 depends on manufacturing year, configuration, automation level, machine condition, and most importantly, cutting time (spindle hours). Machines with lower spindle hours and strong maintenance records are priced higher, while heavily used machines are more affordable due to wear on components such as spindles, guideways, and automation systems.

For older or early-generation machines, prices typically range from $10,000 to $30,000. These units often have higher cutting hours and older control systems, making them suitable for basic production or secondary machining tasks rather than high-precision, high-speed manufacturing.

For machines from the 2000–2015 period, prices generally range from $30,000 to $70,000 depending on condition and automation setup. Units with moderate cutting time (around 20,000–35,000 spindle hours) are considered good value and still widely used in small-part production environments.

For newer machines from 2015–2025, used DMP 35 units typically range from $70,000 to $140,000 or more depending on configuration. Machines with low cutting hours (under 10,000–15,000 hours), pallet automation systems, and high-speed spindle options command the highest prices. Integrated WH cell automation systems can significantly increase value due to production efficiency benefits.

Cutting time is a critical pricing factor because the DMP 35 is primarily used in continuous production environments. Spindle hours give a more accurate indication of machine wear than manufacturing year alone. A lower-hour older machine may be more valuable than a newer high-hour machine in real production conditions.

Overall, the DMP 35 remains a strong option in the used market for manufacturers focused on compact automation, high-speed machining, and cost-efficient mass production of precision components.