USED HAAS VF5/40XT

The Haas VF-5/40XT is an extended-travel vertical machining center designed for machining larger parts while maintaining the performance and reliability of the VF-Series platform. The “XT” designation refers to extended X-axis travel, providing significantly more machining range than the standard VF-5/40. The machine offers approximately 60 inches of X-axis travel, 26 inches of Y-axis travel, and 25 inches of Z-axis travel, allowing operators to machine longer workpieces or place multiple fixtures on the table for production work.

The VF-5/40XT is equipped with a 40-taper inline direct-drive spindle rated at 30 horsepower, capable of speeds up to 8,100 RPM. This configuration provides the power and stability needed for machining aluminum, stainless steel, tool steel, and other industrial materials.

A large table measuring about 62 inches by 23 inches supports heavy workpieces and allows the use of multiple vises or fixtures for increased productivity. The machine is commonly used in production environments where long plates, structural components, or large machined parts are required.

Used Haas VF-5/40XT machines remain popular because they combine a large machining envelope with the simplicity of the Haas CNC control system. Haas machines are widely supported globally, making parts, service, and operator training readily available. For many machine shops, the VF-5/40XT provides an efficient and affordable solution for machining large parts.

HAAS VF5/40XT SPECIFICATIONS

WHY BUY USED HAAS VF5/40XT

Purchasing a used Haas VF-5/40XT is often a practical choice for machine shops that need a large machining envelope without the high cost of buying a brand-new CNC machining center. The extended X-axis travel allows shops to handle long workpieces or multiple setups, which can significantly increase productivity in both job shop and production environments.

One of the major advantages of the VF-5/40XT is its large work area. With 60 inches of X-axis travel, it can machine longer plates, structural components, and industrial parts that would not fit comfortably on smaller vertical machining centers. This capability makes the machine popular in industries such as aerospace, automotive, and general manufacturing.

The VF-5/40XT also features a powerful 30-horsepower spindle and a reliable inline direct-drive system that delivers consistent cutting performance across a wide range of materials. Shops machining aluminum, steel, and stainless components often benefit from this balance of power and precision.

Another reason many businesses purchase used Haas machines is the ease of operation. The Haas CNC control is widely known for its intuitive interface and simple programming workflow. Operators familiar with other Haas machines can quickly adapt to the VF-5/40XT.

Combined with strong resale value, readily available spare parts, and reliable performance, a used VF-5/40XT can be an excellent investment for manufacturers looking to increase machining capacity.

HOW MUCH DOES A USED HAAS VF5/40XT COST?

The price of a used Haas VF-5/40XT depends on several factors including manufacturing year, machine condition, installed options, and total cutting hours. Because the VF-5/40XT offers extended X-axis travel and a larger work envelope than many standard vertical machining centers, it often commands higher resale prices than smaller machines.

Machines manufactured before 2005 typically sell between $25,000 and $45,000. These machines often have higher cutting hours and older control systems, so buyers should carefully inspect spindle condition, axis backlash, and maintenance history.

VF-5/40XT machines produced between 2005 and 2015 generally range from $45,000 to $90,000 depending on their configuration and total cutting hours. Machines with options such as probing systems, chip conveyors, or side-mount tool changers may sell at higher prices.

More recent machines built between 2015 and 2025 usually sell between $90,000 and $160,000 or more. Newer machines often include upgraded Haas Next Generation Control (NGC) systems and additional automation options.

Cutting time significantly affects value. Machines with less than 5,000–7,000 cutting hours often command premium prices, while machines with 15,000+ hours may be discounted because buyers anticipate maintenance for components such as spindle bearings, ballscrews, or tool changer mechanisms.