OKUMA GENOS L200E-MY – 2013
USED OKUMA GENOS L200E-MY – 2013
The 2013 OKUMA GENOS L200E-MY is a compact multi-axis CNC turning center designed to combine conventional turning with live-tool milling, Y-axis machining, and C-axis positioning in a single machine platform. This configuration gives manufacturers the ability to perform turning, drilling, tapping, slotting, cross-hole machining, and other milling operations without requiring a separate machining center for many smaller and medium-sized components.
The GENOS L200E-MY is part of OKUMA’s GENOS L Series, a family of CNC turning machines designed around a compact footprint and production-oriented machining capability. The L200E-MY combines an A2-6 main spindle, 12-position live-tool turret, Y-axis capability, and C-axis indexing. Documented specifications for used 2013 machines show a maximum cutting diameter of approximately 7.87 inches, maximum cutting length of approximately 14.96 inches, and a 21-inch distance between centers.
One of the most important features of the L200E-MY is its milling capability. The machine is equipped for live tooling, with current 2013 listings documenting live-tool speeds up to 6,000 RPM. Combined with Y-axis movement and C-axis indexing, this allows milling features to be produced directly on turned components. The result can be fewer setups, improved positional accuracy between turned and milled features, and shorter overall production cycles.
The machine is also well suited to bar-fed production. A documented 2013 example is equipped with an 8-foot Edge Patriot 338 bar feeder, an 8-inch three-jaw hydraulic chuck, 16C collet equipment, programmable tailstock, chip conveyor, and coolant system. These features make the machine particularly attractive for shops producing repeated batches of cylindrical components from bar stock.
The documented 2013 machine uses an OKUMA OSP-P300L-R CNC control, providing the operator with the programming and machine-control environment required for turning and live-tooling operations. Exact control configurations should always be verified against the individual machine being offered for sale because used machines can be modified, retrofitted, or equipped differently over their service life.
The GENOS L200E-MY is particularly useful when a manufacturer needs the flexibility of a multi-axis turning center but does not require the much larger work envelope of a heavy-duty production lathe. Its approximately 7.87-inch maximum cutting diameter and 14.96-inch maximum cutting length make it suitable for a wide range of smaller precision components.
For buyers looking at used CNC equipment, the 2013 L200E-MY can represent an attractive combination of turning, milling, Y-axis machining, bar feeding, and automated production capability. Current used listings demonstrate that these machines can still be offered with substantial production equipment, including bar feeders, tooling, collets, chip conveyors, hydraulic chucks, and live-tool holders.
OKUMA GENOS L200E-MY – AXIS
The GENOS L200E-MY is designed around multi-axis machining rather than basic two-axis turning. The primary X and Z axes handle conventional turning movements, while the Y-axis provides off-center milling capability. C-axis positioning allows the main spindle to orient the workpiece for milling, drilling, tapping, and other operations around the circumference of the component.
A documented 2013 machine has an X-axis travel of 6.5 inches and a Z-axis travel of 15.75 inches. The Y-axis is included, with published used-machine specifications listing approximately ±1.57 to ±1.96 inches of Y-axis travel depending on the specification source/configuration. C-axis indexing is documented through 360 degrees.
| Specification | Details |
|---|---|
| Machine Type | Multi-Axis CNC Lathe / Turning Center |
| X Axis | Yes |
| Z Axis | Yes |
| Y Axis | Yes |
| X Axis Travel | 6.5 inches |
| Y Axis Travel | Approximately ±1.57 to ±1.96 inches |
| Z Axis Travel | 15.75 inches |
| C Axis | Yes |
| C Axis Indexing | 360° |
| Live Tooling | Yes |
| Turning Capability | Yes |
| Milling Capability | Yes |
| Configuration | Y-Axis Multi-Axis Turning Center |
OKUMA GENOS L200E-MY – AXIS TRAVELS / WORK ENVELOPE
The L200E-MY is designed for smaller precision components where efficient use of floor space and multiple operations in one setup are important. The published maximum machining diameter is 7.87 inches, while the maximum machining length is approximately 14.96 inches.
The 21-inch distance between centers provides additional information about the overall turning envelope, although actual usable workpiece dimensions depend on tooling, chuck or collet setup, tailstock use, workholding, and the specific operation being performed.
| Specification | Details |
|---|---|
| Maximum Cutting Diameter | 7.87 inches |
| Maximum Machining Length | 14.96 inches |
| Distance Between Centers | 21 inches |
| X Axis Travel | 6.5 inches |
| Y Axis Travel | Approximately ±1.57 to ±1.96 inches |
| Z Axis Travel | 15.75 inches |
| C Axis | 360° indexing |
| Swing Over Bed | Approximately 17.72 inches |
| Swing Over Saddle | Approximately 11.81 inches |
| Work Envelope | Configuration and tooling dependent |
| Maximum Part Size | Dependent on workholding and tooling |
The approximately 17.72-inch swing over the bed provides considerably more physical clearance than the machine’s 7.87-inch maximum machining diameter would suggest. This distinction is important because swing represents available physical clearance, while maximum machining diameter represents the practical cutting envelope.
OKUMA GENOS L200E-MY – CAPACITY / WORKHOLDING
The L200E-MY uses an A2-6 spindle nose and is commonly equipped for 8-inch chucking applications. A documented 2013 machine currently offered in the used market includes an 8-inch three-jaw hydraulic chuck described as being in like-new condition.
The machine can also be equipped for collet work. A current 2013 example includes a 16C collet set covering approximately 3/16 through 1-5/8 inches. This gives the machine flexibility when manufacturing smaller turned components where collet workholding can provide good concentricity and fast loading.
| Specification | Details |
|---|---|
| Chuck Size | 8 inches |
| Chuck Type | 3-Jaw Hydraulic |
| Spindle Nose | A2-6 |
| Bar Capacity | 1.7 inches |
| Spindle Bore | 2.6 inches |
| Collet Capability | 16C |
| Documented Collet Range | Approximately 3/16 to 1-5/8 inches |
| Tailstock | Available / documented |
| Tailstock Type | Programmable on documented machine |
| Workholding | Chuck and collet capable |
| Touch Setter | Documented removable touch setter |
| Workholding Configuration | Verify individual machine |
OKUMA GENOS L200E-MY – SPINDLE
The main spindle provides the turning power for the L200E-MY and is built around an A2-6 spindle nose with a 2.6-inch spindle bore. Current listings for the exact 2013 machine document a maximum spindle speed of 4,500 RPM and a 15 HP spindle motor.
Some older GENOS literature lists different spindle ratings and speed information for L200E-MY configurations, including lower motor ratings and 3,000 RPM specifications. Because the exact used 2013 machine currently documented has a 15 HP, 4,500 RPM configuration, buyers should verify the machine’s nameplate and build specification before purchasing.
| Specification | Details |
|---|---|
| Main Spindle | CNC Turning Spindle |
| Spindle Nose | A2-6 |
| Spindle Bore | 2.6 inches |
| Bar Capacity | 1.7 inches |
| Maximum Spindle Speed | 4,500 RPM on documented 2013 configuration |
| Spindle Motor | 15 HP on documented 2013 configuration |
| Spindle Type | Main Turning Spindle |
| C Axis | Yes |
| C Axis Indexing | 360° |
| Speed Control | CNC Controlled |
| Chuck Compatibility | 8-inch chuck documented |
| Exact Spindle Configuration | Verify individual machine |
The 2.6-inch spindle bore and 1.7-inch bar capacity provide a useful combination for small-to-medium turned components. The machine’s 4,500 RPM maximum speed also makes it appropriate for high-speed machining of smaller diameters, especially when combined with suitable workholding and cutting tools.
OKUMA GENOS L200E-MY – TOOL CHANGER / TURRET
The GENOS L200E-MY uses a 12-position turret. Unlike a conventional turning turret that is limited primarily to stationary turning tools, the MY configuration incorporates live-tool capability so milling cutters, drills, taps, and other driven tools can be used.
The documented 2013 machine includes axial and radial live-tool holders, with two axial and two radial holders specifically identified in the equipment list.
| Specification | Details |
|---|---|
| Turret Type | Live-Tool CNC Turret |
| Turret Capacity | 12 Positions |
| Live Tooling | Yes |
| Live Milling Speed | Up to 6,000 RPM |
| Axial Live Holders | 2 documented |
| Radial Live Holders | 2 documented |
| Tool Positions | 12 |
| Milling Operations | Drilling, milling, tapping and related operations |
| Tooling Configuration | Verify individual machine |
| Tool Holder Type | Configuration dependent |
The live tooling system is one of the defining advantages of the L200E-MY. Instead of removing a turned part from the lathe and transferring it to another machine for every secondary milling operation, many features can be completed while the component remains in the same workholding setup.
OKUMA GENOS L200E-MY – CONTROL SYSTEM
A documented 2013 L200E-MY is equipped with the OKUMA OSP-P300L-R CNC control. The control provides the machine interface for programming and operating turning, C-axis positioning, Y-axis movement, and live-tool machining.
Earlier GENOS L-series documentation also identifies OSP-P200L controls on earlier configurations, which is why the control should always be verified on an individual used machine rather than assumed solely from the model name.
| Specification | Details |
|---|---|
| CNC Control | OKUMA OSP-P300L-R on documented 2013 machine |
| Manufacturer | OKUMA |
| Control Type | CNC |
| Turning Control | Yes |
| Live Milling Control | Yes |
| Y Axis Control | Yes |
| C Axis Control | Yes |
| Programmable Workholding Functions | Configuration dependent |
| Tool Setting | Touch setter documented |
| Exact Control Version | Verify individual machine |
OKUMA GENOS L200E-MY – COOLANT / CHIP MANAGEMENT
The L200E-MY is designed as an enclosed CNC turning center with coolant and chip-management capability. A documented 2013 machine includes a coolant system and chip conveyor. These systems are especially valuable in production environments where the machine may operate for extended periods and produce substantial quantities of chips.
Coolant helps control cutting temperature, lubricate the cutting zone, improve tool life, and carry chips away from the cutting area. The chip conveyor can reduce the amount of manual cleaning required around the machine and can make continuous production more practical.
| Specification | Details |
|---|---|
| Coolant System | Yes |
| Coolant Pump | Standard/configuration dependent |
| Chip Conveyor | Documented |
| Chip Removal | Conveyor based on equipped configuration |
| Machine Enclosure | Full enclosure |
| Work Light | Standard/documented |
| Coolant Delivery | Tool and operation dependent |
| High-Pressure Coolant | Verify individual machine |
| Through-Spindle Coolant | Verify individual machine |
| Chip Conveyor Type | Verify individual machine |
The GENOS L-series documentation identifies a coolant system, work lamp, full enclosure shielding, door interlock, and lubrication monitoring as part of the machine’s standard equipment/features.
OKUMA GENOS L200E-MY – POWER REQUIREMENTS
Power requirements can vary according to the exact electrical configuration, options, coolant equipment, bar feeder, chip conveyor, and country in which the machine was installed. A currently documented 2013 L200E-MY is listed with a 220V electrical configuration.
The main spindle on this documented machine is listed at 15 HP. The live-tooling spindle has a substantially smaller motor because its purpose is secondary milling, drilling, tapping, and related operations rather than primary turning.
| Specification | Details |
|---|---|
| Electrical Configuration | 220V documented on current 2013 example |
| Main Spindle Motor | 15 HP |
| Main Spindle Motor Metric Rating | 11.2 kW |
| Live Tool Motor | Configuration dependent |
| Live Milling Motor | Approximately 4.0/1.8 kW in published GENOS documentation |
| Coolant Pump | Configuration dependent |
| Phase | Verify individual machine |
| Frequency | Verify individual machine |
| Total Connected Load | Verify individual machine |
| Electrical Cabinet | CNC machine control cabinet |
| Installation Requirements | Verify machine nameplate |
OKUMA GENOS L200E-MY – DIMENSIONS
The GENOS L200E-MY is intended as a compact production turning center compared with larger industrial multi-axis lathes. Exact footprint dimensions should be verified against the individual machine, particularly when a chip conveyor, bar feeder, or other auxiliary equipment is included.
Published GENOS L-series documentation identifies the L200E-MY as having a machine weight of approximately 4,600 kg with CNC for the documented configuration family.
| Specification | Details |
|---|---|
| Machine Weight | Approximately 4,600 kg / 10,141 lb in published L200E-MY specification |
| Machine Height | Verify individual machine |
| Machine Width | Verify individual machine |
| Machine Length | Verify individual machine |
| Floor Space | Configuration dependent |
| Bar Feeder Footprint | Additional space required |
| Chip Conveyor Footprint | Additional space required |
| Service Clearance | Required around machine |
| Shipping Weight | Verify individual machine |
| Shipping Dimensions | Verify individual machine |
For a used-machine installation, the footprint of the machine itself should not be treated as the complete installation requirement. An 8-foot bar feeder can add considerable length to the overall production cell, while a chip conveyor can also affect the required floor space.
OKUMA GENOS L200E-MY – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | OKUMA |
| Model | GENOS L200E-MY |
| Year | 2013 |
| Machine Category | Multi-Axis Machines |
| Machine Type | Multi-Axis CNC Lathe |
| Primary Process | CNC Turning |
| Secondary Process | Live-Tool Milling |
| Y Axis | Yes |
| C Axis | Yes |
| Maximum Cutting Diameter | 7.87 inches |
| Maximum Cutting Length | 14.96 inches |
| Distance Between Centers | 21 inches |
| Swing Over Bed | 17.72 inches |
| Swing Over Saddle | 11.81 inches |
| Spindle Bore | 2.6 inches |
| Bar Capacity | 1.7 inches |
| Spindle Nose | A2-6 |
| Main Spindle Speed | Up to 4,500 RPM on documented 2013 machine |
| Main Spindle Motor | 15 HP on documented 2013 machine |
| Turret | 12 Position |
| Live Tool Speed | Up to 6,000 RPM |
| CNC Control | OSP-P300L-R on documented 2013 machine |
| Chuck | 8-inch 3-jaw hydraulic chuck documented |
| Bar Feeder | 8-foot Edge Patriot 338 documented on current machine |
| Tailstock | Programmable tailstock documented |
| Chip Conveyor | Yes, documented |
| Coolant System | Yes |
| Touch Setter | Removable touch setter documented |
| Collet System | 16C documented |
| Machine Weight | Approximately 4,600 kg published for L200E-MY |
| Electrical | 220V documented on current machine |
| Condition | Used |
| Exact Equipment | Verify individual machine |
INDUSTRIES THAT USE OKUMA GENOS L200E-MY
Aerospace Component Manufacturing
The GENOS L200E-MY can be used for smaller aerospace components requiring a combination of turning and secondary milling. Components such as precision sleeves, bushings, fittings, adapters, and small structural hardware can benefit from completing multiple operations in one setup.
Medical and Laboratory Equipment
The machine is particularly suitable for small precision components used in laboratory and medical equipment. One current 2013 example was reportedly used primarily for producing small laboratory testing equipment and was cutting 303 stainless steel and brass.
Automotive Components
Automotive suppliers can use the L200E-MY for smaller shafts, pins, connectors, fittings, bushings, and other turned components that require secondary holes, flats, slots, or milled features.
Industrial Equipment
Manufacturers of pumps, valves, automation equipment, machinery, and industrial assemblies can use the machine for producing precision turned components that require cross-drilling, milling, or tapping.
Hydraulic and Pneumatic Components
The spindle capacity and live tooling make the machine useful for manufacturing smaller hydraulic and pneumatic fittings, adapters, valve components, sleeves, and related precision components.
Electronics and Electrical Hardware
The L200E-MY can produce small cylindrical housings, connectors, shafts, spacers, mounting components, and other precision metal parts used in electrical and electronic assemblies.
Contract CNC Manufacturing
Job shops can benefit from the machine’s ability to handle multiple processes in one setup. This is particularly useful when customers require small and medium production runs containing turned components with milled features.
General Precision Manufacturing
Any manufacturer producing relatively small cylindrical components with secondary milling requirements can potentially benefit from the GENOS L200E-MY. Its combination of turning, Y-axis movement, C-axis indexing, and live tooling allows one machine to perform operations that would otherwise require multiple setups.
TYPICAL PARTS OKUMA GENOS L200E-MY CAN PRODUCE
| Part Type | Typical Operations |
|---|---|
| Shafts | Turning, grooving, drilling |
| Pins | Turning, chamfering, drilling |
| Bushings | OD/ID turning, facing, boring |
| Spacers | Turning, facing, grooving |
| Fittings | Turning, drilling, milling |
| Adapters | Turning, threading, cross drilling |
| Valve Components | Turning, boring, drilling, milling |
| Hydraulic Components | Turning, threading, drilling |
| Pneumatic Components | Turning, drilling, tapping |
| Laboratory Components | Turning, milling, drilling |
| Small Housings | Turning, boring, milling |
| Connectors | Turning, drilling, slotting |
| Flanges | Turning, drilling, milling |
| Automotive Hardware | Turning, drilling, milling |
| Precision Bushings | Turning, boring, grooving |
| Instrument Components | Turning, drilling, milling |
WHY CHOOSE OKUMA GENOS L200E-MY
The biggest advantage of the GENOS L200E-MY is multi-process capability. A conventional CNC lathe can produce excellent turned components, but parts requiring milling features normally have to move to another machine. The L200E-MY can perform many of these secondary operations directly on the turning center.
The Y-axis is particularly valuable for off-center machining. It allows the live tool to move relative to the centerline of the workpiece, expanding the range of milling, drilling, and tapping operations that can be performed.
The C-axis adds another important capability. Instead of treating the spindle simply as a rotating turning spindle, the CNC can position the workpiece angularly for controlled machining around the circumference.
The 12-position live-tool turret provides multiple tool locations while maintaining a relatively compact machine configuration. This is useful for production jobs requiring several turning tools plus live drills, mills, and other driven tooling.
The 4,500 RPM main spindle documented on the current 2013 machine provides a useful speed range for smaller-diameter components. Combined with the 15 HP spindle motor, the machine can handle a broad range of production turning applications within its work envelope.
The 6,000 RPM live tooling capability further increases the machine’s flexibility. Small drills and milling cutters can be operated at appropriate speeds for precision secondary operations.
The bar-feeding capability is another major production advantage. With an appropriate bar feeder, the machine can automatically feed material for repeated component production, reducing manual loading and improving consistency between parts.
Finally, OKUMA’s CNC platform gives the machine a production-oriented control environment. A current 2013 machine listing identifies the OSP-P300L-R control, providing a more specific configuration reference for buyers evaluating this particular generation of L200E-MY.
WHY BUY USED OKUMA GENOS L200E-MY
Buying a used GENOS L200E-MY can provide access to multi-axis turning capability at a substantially lower acquisition cost than purchasing a comparable new multi-axis turning center.
The machine combines several expensive capabilities in one platform: CNC turning, live tooling, Y-axis machining, C-axis positioning, programmable workholding, and bar-fed production capability. A used machine that already includes these options can be especially valuable for a shop expanding its machining capabilities.
A used L200E-MY can also be attractive to a job shop that needs to increase its ability to quote more complex parts. A customer may submit a component that requires turning plus cross holes, flats, slots, or tapped features. A machine with Y-axis and live tooling can make that job substantially easier to produce.
The included accessories can have significant value. A current 2013 machine listing includes an 8-foot bar feeder, 8-inch hydraulic chuck, programmable tailstock, chip conveyor, touch setter, live-tool holders, and 16C collet tooling.
Existing tooling can also reduce startup expenses. A machine that comes with axial and radial live-tool holders and a useful collet set may be considerably more production-ready than a bare machine requiring the buyer to purchase all workholding and driven-tool accessories separately.
Used equipment can also be attractive when the buyer needs a machine quickly. Instead of waiting for a new machine to be manufactured and delivered, a used machine that is already in inventory and under power can potentially be inspected and installed much sooner.
However, buyers should inspect the machine carefully. Particular attention should be paid to spindle condition, turret indexing, live-tool operation, Y-axis backlash, C-axis positioning, hydraulic systems, coolant condition, chip conveyor operation, bar feeder operation, control functionality, and machine geometry.
The condition of the individual machine is ultimately more important than the year alone. A well-maintained 2013 machine with documented service history and moderate cutting hours can be considerably more attractive than a newer machine that has been heavily used or poorly maintained.
HOW MUCH DOES A USED OKUMA GENOS L200E-MY COST?
The price of a used OKUMA GENOS L200E-MY – 2013 can vary substantially depending on machine condition, cutting hours, control configuration, tooling, workholding, bar feeder, chip conveyor, live-tool holders, maintenance history, and whether the machine is being sold under power.
A current 2013 L200E-MY listing from a U.S. dealer is being offered for sale with 4,655 cutting hours, live milling, Y-axis, an 8-inch chuck, presetter/touch setter, programmable tailstock, 8-foot bar feeder, chip conveyor, and live-tool holders. The seller is currently offering the machine by Request Quote rather than publishing an asking price.
Another current used-equipment listing for a 2013 GENOS L200E-MY identifies the same general configuration, including the OSP-P300L-R control, Y-axis, live tooling, 8-foot bar feeder, 8-inch hydraulic chuck, programmable tailstock, chip conveyor, and 16C collet set.
Because current sellers are using quote-based pricing, it would not be appropriate to assign a fabricated market value to every 2013 GENOS L200E-MY. Actual transaction value can differ considerably based on the condition and included equipment.
| Used Machine Pricing Factor | Effect on Value |
|---|---|
| Machine Year | 2013 |
| Machine Condition | Major valuation factor |
| Cutting Hours | Lower hours can improve desirability |
| Spindle Condition | Major valuation factor |
| Y Axis Condition | Important for multi-axis work |
| C Axis Accuracy | Important for milling operations |
| Live Tooling | Adds production capability |
| 12 Position Turret | Standard major feature |
| OSP-P300L-R Control | Documented on current 2013 machine |
| Bar Feeder | Significant production accessory |
| Chip Conveyor | Valuable for production |
| Hydraulic Chuck | Included on documented machine |
| Programmable Tailstock | Adds flexibility |
| Live Tool Holders | Reduces setup expense |
| 16C Collet Set | Adds workholding value |
| Service History | Can materially affect value |
| Under Power | Strong advantage for inspection |
| Tooling Included | Can reduce buyer’s startup cost |
| Asking Price | Request Quote on current examples |
| Actual Sale Price | Must be verified independently |
For buyers comparing machines, the best approach is to evaluate the complete production package, not simply the base machine. A GENOS L200E-MY equipped with a bar feeder, live-tool holders, hydraulic chuck, collet system, chip conveyor, touch setter, and programmable tailstock can represent a substantially more complete production solution than a machine sold without these accessories.
The 2013 GENOS L200E-MY remains an appealing used CNC option for manufacturers looking for a compact turning center capable of combining turning and milling operations. With its Y-axis, C-axis, live tooling, 12-position turret, A2-6 spindle, 1.7-inch bar capacity, and documented 4,500 RPM main spindle configuration, it can address a broad range of small precision-component applications.
