USED OKUMA MB-5000H – 2015

The OKUMA MB-5000H – 2015 is a high-performance horizontal machining center designed for precision production and heavy-duty machining of medium-sized components. Okuma’s MB series is known for rigid machine construction, high-speed spindle performance, and strong thermal stability, making the MB-5000H well suited for demanding production environments.

The MB-5000H provides approximately 30 inches of X-axis travel, 28 inches of Y-axis travel, and 32 inches of Z-axis travel, depending on the specific configuration. The machine typically features a 500 mm pallet, allowing manufacturers to machine substantial workpieces while maintaining efficient chip evacuation and accessibility around the component.

A typical machine is equipped with a 12,000 RPM spindle and approximately 30 HP spindle motor, with CAT 40 tooling and a high-capacity automatic tool changer. The horizontal configuration allows chips to fall naturally away from the cutting area, making the machine particularly effective for deep-pocket machining, heavy roughing, and high-volume production.

The 2015 MB-5000H is an excellent choice for manufacturers seeking a rigid, automated horizontal machining platform for automotive, aerospace, energy, industrial equipment, and general precision manufacturing applications.

---

OKUMA MB-5000H – 2015 – AXIS

Specification	Details
Machine Type	CNC Horizontal Machining Center
Axis Configuration	4-Axis
X-Axis Travel	Approx. 30″ / 760 mm
Y-Axis Travel	Approx. 28″ / 710 mm
Z-Axis Travel	Approx. 32″ / 810 mm
B-Axis	360° Indexing
B-Axis Increment	1° Standard / Configuration Dependent
Simultaneous Interpolation	Available
Rigid Tapping	Standard
4th-Axis Machining	Standard

---

OKUMA MB-5000H – 2015 – WORK ENVELOPE

Specification	Details
Pallet Size	19.7″ x 19.7″ / 500 x 500 mm
Maximum Workpiece Diameter	Approx. 31.5″
Maximum Workpiece Height	Approx. 39.4″
Maximum Workpiece Weight	Approx. 1,100 lbs
Pallet Configuration	Dual Pallet
Pallet Change	Automatic
Rotary Table	Standard B-Axis
Workholding	Fixtures / Vises
Multiple Fixture Machining	Supported
Tombstone Machining	Excellent

The horizontal layout and dual-pallet arrangement make the MB-5000H particularly effective for production environments where setup time and machine utilization are important.

---

OKUMA MB-5000H – 2015 – SPINDLE

Specification	Details
Spindle Type	High-Speed Horizontal
Spindle Taper	CAT 40
Maximum Spindle Speed	12,000 RPM
Spindle Motor	Approx. 30 HP
Peak Power	Approx. 40 HP
Spindle Nose	CAT 40
Spindle Cooling	Standard
Spindle Orientation	Standard
Rigid Tapping	Standard
Through-Spindle Coolant	Optional

The 12,000 RPM spindle provides a strong combination of speed and torque for roughing and finishing a wide variety of materials.

---

OKUMA MB-5000H – 2015 – TOOL CHANGER

Specification	Details
Tool Changer Type	Automatic
Tool Capacity	32 Tools Standard
Expanded Capacity	Available
Tool Taper	CAT 40
Tool Change	Automatic
Tool Management	CNC Controlled
Heavy Tool Support	Yes
Long Tool Support	Yes
Random Tool Selection	Standard
Tool-Life Management	Available

The automatic tool changer supports unattended production and allows a large number of machining operations to be programmed within a single cycle.

---

OKUMA MB-5000H – 2015 – PALLET SYSTEM

Specification	Details
Pallet Size	500 x 500 mm
Number of Pallets	2
Pallet Change	Automatic
B-Axis	360°
B-Axis Drive	Servo
Pallet Indexing	Automatic
Pallet Change Time	Approx. 8–12 sec
Fixture Capacity	Heavy-Duty
Tombstone Compatibility	Yes
Pallet Load	Approx. 1,100 lbs

The dual-pallet system allows operators to load and unload one pallet while the machine continues machining the other, increasing spindle utilization.

---

OKUMA MB-5000H – 2015 – CONTROL SYSTEM

Specification	Details
CNC Control	Okuma OSP-P300M
Programming	G-Code
Display	Color LCD
Tool Offset Management	Standard
Work Offset Management	Standard
Conversational Programming	Available
Rigid Tapping	Standard
Custom Macros	Available
Ethernet	Available
USB	Available
Diagnostics	Standard
Thermal Compensation	Standard

The Okuma OSP-P300M control provides advanced machining functions, user-friendly programming, and integrated monitoring capabilities.

---

OKUMA MB-5000H – 2015 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 60 m/min
Y-Axis Rapid Traverse	Approx. 60 m/min
Z-Axis Rapid Traverse	Approx. 60 m/min
B-Axis Rapid Traverse	High-Speed Servo
Cutting Feedrate	Programmable
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes
High-Speed Machining	Supported
Look-Ahead Control	Available

---

OKUMA MB-5000H – 2015 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Standard
Coolant Tank	Standard
High-Pressure Coolant	Optional
Through-Spindle Coolant	Optional
Chip Conveyor	Standard / Optional
Chip Management	Excellent
Coolant Filtration	Standard
Oil Skimmer	Optional
Mist Collector	Optional
Automatic Lubrication	Standard

Horizontal machining provides natural chip evacuation, which is especially beneficial when machining deep pockets and large volumes of material.

---

OKUMA MB-5000H – 2015 – AUTOMATION

Specification	Details
Dual Pallets	Standard
Automatic Pallet Changer	Standard
Automatic Tool Changer	Standard
Tool Presetter	Optional
Work Probe	Optional
Tool Probe	Optional
Pallet Pool Compatibility	Available
Robot Integration	Possible
Automated Loading	Supported
Lights-Out Production	Supported

---

OKUMA MB-5000H – 2015 – POWER REQUIREMENTS

Specification	Details
Main Spindle Motor	Approx. 30 HP
Electrical Service	Three-Phase
Input Voltage	200 / 220V Configuration Dependent
Frequency	50 / 60 Hz
Shop Air	Required
Hydraulic System	Standard
Lubrication System	Automatic
Electrical Cabinet	Okuma
Installation	Industrial

---

OKUMA MB-5000H – 2015 – DIMENSIONS

Specification	Details
Machine Width	Approx. 145″
Machine Depth	Approx. 140″
Machine Height	Approx. 115″
Machine Weight	Approx. 30,000 lbs
Floor Space	Large
Installation	Industrial
Rigging	Required
Chip Conveyor	Configuration Dependent

---

OKUMA MB-5000H – 2015 – GENERAL INFORMATION

Specification	Details
Manufacturer	Okuma
Model	MB-5000H
Year	2015
Machine Category	Horizontal Machining Center
Axis Configuration	4-Axis
Pallet Size	500 x 500 mm
Number of Pallets	2
X-Axis Travel	Approx. 30″
Y-Axis Travel	Approx. 28″
Z-Axis Travel	Approx. 32″
B-Axis	360°
Spindle Taper	CAT 40
Spindle Speed	12,000 RPM
Spindle Power	Approx. 30 HP
Tool Capacity	32
CNC Control	Okuma OSP-P300M

---

INDUSTRIES THAT USE OKUMA MB-5000H

The OKUMA MB-5000H is commonly used in:

• Automotive
• Aerospace
• Defense
• Energy
• Heavy Equipment
• Industrial Machinery
• Oil & Gas
• Construction Equipment
• General Manufacturing
• Contract Machining
• Precision Engineering
• Die & Mold

---

TYPICAL PARTS OKUMA MB-5000H CAN PRODUCE

Typical components include:

• Engine components
• Transmission housings
• Gear housings
• Pump bodies
• Valve bodies
• Hydraulic components
• Machine bases
• Industrial housings
• Aerospace structural components
• Heavy equipment components
• Precision castings
• Large fixtures

Typical operations include face milling, pocket milling, contouring, drilling, boring, tapping, reaming, thread milling, and heavy material removal.

---

WHY CHOOSE OKUMA MB-5000H

The OKUMA MB-5000H is particularly attractive for manufacturers that need high production throughput combined with rigid horizontal machining capability. The 500 mm dual-pallet system allows workpieces to be prepared offline while another pallet is being machined, helping minimize spindle downtime.

Its horizontal spindle orientation also provides excellent chip evacuation during deep-pocket and heavy roughing operations. The CAT 40, 12,000 RPM spindle provides enough speed for finishing while retaining the rigidity necessary for production machining.

The combination of the OSP control, automatic pallet changer, automatic tool changer, and 4-axis B-axis machining makes the MB-5000H a versatile production platform.

---

WHY BUY USED OKUMA MB-5000H – 2015

A used 2015 OKUMA MB-5000H can offer substantial production capability at a lower investment than purchasing a new horizontal machining center.

Before purchasing, inspect the spindle, pallet changer, B-axis, ballscrews, linear guides, tool changer, coolant system, chip conveyor, hydraulic system, and OSP control. Check spindle runout, axis backlash, pallet positioning accuracy, B-axis indexing, and machine geometry.

A machine with low spindle hours, documented maintenance, high-pressure coolant, through-spindle coolant, probing, chip conveyor, and additional tooling can command a significant premium.

---

HOW MUCH DOES A USED OKUMA MB-5000H – 2015 COST?

The market value of a used OKUMA MB-5000H – 2015 depends on spindle hours, machine condition, tooling, pallet configuration, coolant options, and maintenance history.

USED OKUMA MB-5000H – 2015 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$70,000 – $85,000
Functional Production Machine	$85,000 – $105,000
Good Condition / Production Ready	$105,000 – $125,000
Excellent / Well Equipped	$125,000 – $145,000
Low Hours / Fully Equipped	$145,000 – $165,000+

For a 2015 OKUMA MB-5000H in good working condition, a realistic market value is approximately $100,000–$135,000 USD.

For your inventory listing, a recommended asking-price range is $115,000–$145,000 USD for a clean machine equipped with a dual-pallet system, 32-tool ATC, 12,000 RPM spindle, chip conveyor, high-pressure coolant, and tooling package.

Best estimated listing value: $115,000–$145,000 USD.