USED HAAS HL2
The HAAS HL2 is a 2-axis CNC turning center designed for general-purpose production, repair work, job-shop machining, and medium-sized turned components. Its slant-bed construction, hydraulic chuck, programmable tailstock, automatic turret, and Haas CNC control make it suitable for turning a wide variety of shafts, bushings, flanges, fittings, and other cylindrical components.
The HL2 provides approximately 20 inches of swing over the bed, 9.5 inches of swing over the cross slide, 10 inches of maximum turning diameter, and approximately 20 inches of machining length in documented configurations. An 8-inch chuck and 2-inch bar capacity are commonly associated with the machine.
The machine uses a 15-hp spindle in many documented configurations, with spindle speeds reaching approximately 3,750–4,000 RPM depending on the particular machine. Some specifications and later/individual configurations report higher spindle speeds, so buyers should verify the spindle package on the machine being purchased.
A 10-station turret, programmable tailstock, parts catcher, chip auger, tool presetter, rigid tapping, and Haas CNC control are among the options commonly found on used HL2 machines.
HAAS HL2 – AXIS
The HAAS HL2 is a 2-axis CNC lathe, using X-axis cross travel for diameter control and Z-axis longitudinal travel for turning length. The compact two-axis architecture makes it straightforward to program for conventional turning operations.
| Specification | Details |
|---|---|
| Machine Configuration | 2-axis CNC turning center |
| X Axis | Cross-slide movement |
| Z Axis | Longitudinal movement |
| X-Axis Travel | Approx. 8.45 in / 214.6 mm |
| Z-Axis Travel | Approx. 20 in / 508 mm |
| Spindle | Main spindle |
| Tailstock | Available / commonly equipped |
| Turret | 10-position |
The documented HL2 configuration uses an A2-series spindle nose and an automatic turret for production turning.
HAAS HL2 – AXIS TRAVELS / WORK ENVELOPE
The HL2 offers a useful work envelope for a compact CNC lathe. Its approximately 20-inch Z-axis travel provides room for parts around the machine’s 20-inch swing envelope, subject to chuck, tooling, tailstock, and workholding limitations.
| Specification | Details |
|---|---|
| X-Axis Travel | Approx. 8.45 in / 214.6 mm |
| Z-Axis Travel | Approx. 20 in / 508 mm |
| Swing Over Bed | Approx. 20 in / 508 mm |
| Swing Over Cross Slide | Approx. 9.5 in / 241.3 mm |
| Maximum Turning Diameter | Approx. 10 in / 254 mm |
| Maximum Turning Length | Approx. 20–24 in depending on configuration |
| Distance Between Centers | Approx. 24 in on documented configuration |
The actual usable machining envelope depends on the installed chuck, tooling, tailstock position, and individual machine configuration.
HAAS HL2 – CAPACITY
The HAAS HL2 is designed for workpieces that can be accommodated by an 8-inch chuck and approximately 2-inch bar capacity. This makes it suitable for a broad range of general-purpose turning applications.
| Specification | Details |
|---|---|
| Chuck Size | 8 in |
| Maximum Bar Capacity | Approx. 2 in / 50.8 mm |
| Maximum Turning Diameter | Approx. 10 in / 254 mm |
| Maximum Turning Length | Approx. 20 in |
| Swing Over Bed | Approx. 20 in |
| Swing Over Cross Slide | Approx. 9.5 in |
| Distance Between Centers | Approx. 24 in on documented configuration |
Some used machines are equipped with 8- or 10-inch chucks, so the actual chuck and drawtube arrangement should be confirmed before purchasing.
HAAS HL2 – SPINDLE
The HL2’s spindle is designed to provide the speed and torque necessary for conventional turning, facing, boring, threading, and grooving operations. Documented HL2 machines commonly use a 15-hp spindle motor with maximum speeds around 3,750–4,000 RPM.
| Specification | Details |
|---|---|
| Spindle Type | Horizontal turning spindle |
| Spindle Power | Approx. 15 hp |
| Maximum Speed | Approx. 3,750–4,000 RPM |
| Spindle Nose | A2-series |
| Spindle Bore | Approx. 3 in / 76.2 mm |
| Bar Capacity | Approx. 2 in / 50.8 mm |
| Chuck | Commonly 8 in |
| Spindle Orientation | Programmable |
The spindle should be checked for bearing noise, vibration, runout, drawtube condition, chuck operation, and speed stability when evaluating a used HL2.
HAAS HL2 – TURNING SPINDLE
The HL2 spindle provides the foundation for standard CNC turning operations. Its 15-hp class motor and approximately 3,750–4,000 RPM capability make it appropriate for machining steel, stainless steel, aluminum, brass, and other commonly turned materials.
| Specification | Details |
|---|---|
| Spindle Motor | Approx. 15 hp |
| Maximum Speed | Approx. 3,750–4,000 RPM |
| Spindle Bore | Approx. 3 in |
| Bar Capacity | Approx. 2 in |
| Spindle Nose | A2-series |
| Chuck | 8 in typical |
| Spindle Orientation | Available |
The machine is primarily intended for turning rather than live-tool milling, and documented HL2 specifications list no live tooling.
HAAS HL2 – TOOL TURRET
The HAAS HL2 commonly uses a 10-position turret. This allows multiple turning, facing, boring, threading, grooving, and parting tools to remain loaded for production work.
| Specification | Details |
|---|---|
| Turret Type | Automatic CNC turret |
| Tool Positions | 10 |
| Tooling | Turning and boring tools |
| Tool Presetter | Available on equipped machines |
| Indexing | CNC controlled |
| Typical Operations | Turning, facing, boring, threading, grooving |
The exact turret tooling package varies between used machines, so buyers should verify which holders and tooling are included with the machine.
HAAS HL2 – CONTROL SYSTEM
The HL2 uses the HAAS CNC control system, providing CNC programming and machine operation through Haas’ integrated control architecture. Older HL2 machines can have different control generations and software configurations.
| Specification | Details |
|---|---|
| CNC Control | HAAS CNC |
| Programming | CNC turning |
| RS-232 | Available on documented configurations |
| Rigid Tapping | Available |
| Macros | Available on equipped machines |
| Tool Offsets | CNC controlled |
| Spindle Orientation | Available |
| Programmable Tailstock | Available on equipped machines |
Because HL2 machines span multiple production years, the exact control version, memory capacity, communications hardware, and software options should be checked before purchase.
HAAS HL2 – COOLANT & CHIP MANAGEMENT
The HL2 can be equipped with a coolant system and chip auger for removing chips from the machining area. The chip auger is particularly useful during continuous production where manual chip removal would interrupt machine operation.
| Specification | Details |
|---|---|
| Coolant | Flood coolant |
| Chip Removal | Chip auger on equipped machines |
| Chip Conveyor | Configuration dependent |
| Coolant Delivery | Tool/nozzle based |
| Chip Management | Automatic auger available |
| Coolant Tank | Machine-specific |
Used HL2 buyers should inspect the coolant pump, tank, hoses, auger motor, auger flighting, and chip discharge area for wear or damage.
HAAS HL2 – FEEDRATES
The HL2 provides rapid positioning suitable for production turning. Documented specifications for earlier HL2 configurations show approximately 400 IPM X- and Z-axis rapid traverse rates.
| Specification | Details |
|---|---|
| X Rapid | Approx. 400 IPM |
| Z Rapid | Approx. 400 IPM |
| X Travel | Approx. 8.45 in |
| Z Travel | Approx. 20 in |
| Cutting Feed | Application dependent |
| Threading Feed | CNC programmed |
Actual cutting feed rates depend on material, insert geometry, depth of cut, spindle speed, tooling, and machining strategy.
HAAS HL2 – TAILSTOCK
A programmable or hydraulic tailstock is commonly available on the HL2 and provides additional support for longer workpieces.
| Specification | Details |
|---|---|
| Tailstock | Yes |
| Tailstock Type | Hydraulic / programmable on equipped machines |
| Quill Taper | MT4 on documented configuration |
| Tailstock Travel | Approx. 20 in |
| Function | Workpiece support |
| CNC Control | Programmable on equipped machines |
The tailstock is particularly useful for long shafts and components where additional support is required to reduce deflection during turning.
HAAS HL2 – PARTS CATCHER
Some HL2 machines are equipped with a programmable parts catcher, allowing completed components to be automatically collected after cutoff.
| Specification | Details |
|---|---|
| Parts Catcher | Available |
| Operation | Programmable |
| Application | Automatic part collection |
| Production Benefit | Reduced operator intervention |
| Integration | CNC controlled on equipped machines |
A functioning parts catcher can be particularly useful for repetitive production runs where automatic part removal is desirable.
HAAS HL2 – POWER REQUIREMENTS
Electrical requirements vary according to the machine’s production year, spindle configuration, coolant system, chip auger, and other installed options.
| Specification | Details |
|---|---|
| Spindle Motor | Approx. 15 hp |
| Electrical System | Industrial 3-phase |
| Voltage | Verify machine-specific configuration |
| Control | HAAS CNC |
| Coolant | Machine-specific |
| Installation | Verify electrical documentation before installation |
The exact voltage, amperage, phase, transformer requirements, and disconnect specifications should be confirmed from the machine’s electrical documentation.
HAAS HL2 – DIMENSIONS
The HL2 has a relatively compact footprint for a production CNC turning center. A documented configuration measures approximately 126 x 70 x 70 inches, while another current used HL2 listing reports a footprint of approximately 1,830 x 1,500 mm.
| Specification | Details |
|---|---|
| Approximate Length | 126 in |
| Approximate Width | 70 in |
| Approximate Height | 70 in |
| Approximate Weight | 9,000 lb |
| Metric Footprint Example | Approx. 3,200 x 1,778 x 1,778 mm |
| Installation | Verify machine-specific drawing |
Accessories such as chip augers, barfeeders, hydraulic equipment, and coolant systems can change the required installation footprint.
HAAS HL2 – GENERAL INFORMATION
The HAAS HL2 is a conventional 2-axis slant-bed CNC turning center designed for efficient production of cylindrical components. Its combination of approximately 10-inch maximum turning diameter, 20-inch-class machining length, 8-inch chuck, 2-inch bar capacity, 15-hp spindle, automatic turret, and tailstock gives it a useful range for general machining operations.
| Specification | Details |
|---|---|
| Manufacturer | HAAS |
| Model | HL2 |
| Machine Type | CNC Turning Center |
| Axes | 2 |
| Chuck | 8 in typical |
| Bar Capacity | Approx. 2 in |
| Maximum Turning Diameter | Approx. 10 in |
| Swing Over Bed | Approx. 20 in |
| Machining Length | Approx. 20–24 in |
| Spindle Power | Approx. 15 hp |
| Maximum Spindle Speed | Approx. 3,750–4,000 RPM |
| Turret | 10-position |
| Tailstock | Yes |
| Control | HAAS CNC |
| Live Tooling | No on documented configurations |
INDUSTRIES THAT USE HAAS HL2
The HL2’s general-purpose turning capabilities make it useful across many manufacturing sectors.
| Industry | Typical Applications |
|---|---|
| Automotive | Shafts, bushings, spacers and fittings |
| Industrial Manufacturing | Machine components and couplings |
| Hydraulic | Cylinders, fittings and hydraulic components |
| Oil & Gas | Small shafts, fittings and connectors |
| Aerospace | Precision turned components |
| Job Shops | Short- and medium-run turning |
| Maintenance & Repair | Replacement machine components |
| General Manufacturing | Production turned parts |
| Tool & Die | Bushings, tooling components and fixtures |
TYPICAL PARTS HAAS HL2 CAN PRODUCE
The HL2 can produce a wide variety of cylindrical and rotational components within its turning envelope.
| Part Type | Examples |
|---|---|
| Shafts | Stepped shafts and drive shafts |
| Bushings | Bronze, steel and aluminum bushings |
| Spacers | Precision spacers and sleeves |
| Flanges | Small machined flanges |
| Pins | Precision pins and dowels |
| Fittings | Hydraulic and pneumatic fittings |
| Couplings | Industrial couplings |
| Rollers | Small rollers and cylindrical components |
| Threaded Parts | Threaded shafts and fittings |
| Prototype Parts | General-purpose turned prototypes |
WHY CHOOSE HAAS HL2
The HAAS HL2 offers a straightforward combination of CNC turning capability, automatic tooling, tailstock support, and a useful work envelope. Its 2-axis architecture makes it relatively simple to program and operate for standard turning applications.
The 8-inch chuck, approximately 2-inch bar capacity, 10-inch maximum turning diameter, 15-hp spindle, and 10-position turret provide a practical platform for many job-shop and production applications.
The machine can also be configured with a programmable tailstock, parts catcher, chip auger, tool presetter, rigid tapping, and other features that improve production efficiency.
WHY BUY USED HAAS HL2
A used HAAS HL2 can be an economical way for a machine shop to add a dependable CNC turning center without the acquisition cost associated with a newer CNC lathe. Current used-market examples demonstrate that HL2 machines remain available at relatively accessible prices, although condition and configuration create significant differences in value.
The HL2 is particularly attractive for shops that need a conventional 2-axis CNC lathe for shafts, bushings, fittings, spacers, flanges, and other rotational components. Its relatively compact footprint can also make it easier to accommodate than larger production turning centers.
Because many HL2 machines are now older, buyers should pay close attention to spindle condition, ballscrew wear, linear-guide or box-way condition, turret indexing, hydraulic systems, tailstock operation, chuck condition, control electronics, lubrication, and coolant/chip-removal equipment.
HOW MUCH DOES A USED HAAS HL2 COST?
Current used-market pricing shows substantial variation depending on year, condition, tooling, spindle hours, and accessories. A current 1997 HAAS HL2 is advertised around $9,900, while another used HL2 with a 5C closer, programmable tailstock, chip auger, and other equipment is listed at $8,950. A current 1998 example is advertised around $5,950.
A current 2004 listing at $26,500 is actually a HAAS TL-2 toolroom lathe rather than a conventional HL2, so it should not be used as a direct HL2 price comparison.
Based on current HL2 listings and the documented configurations available in the used market, a reasonable general price guide is:
| Condition | Estimated Used Price |
|---|---|
| As-Is / High Hours | $5,000–$8,000 |
| Running / Average Condition | $8,000–$11,000 |
| Good Condition | $11,000–$15,000 |
| Excellent Condition | $15,000–$20,000 |
| Low-Hour / Well Equipped | $20,000–$25,000+ |
| Best Estimated Listing Value | $12,000–$16,000 |
A clean HL2 equipped with an 8-inch hydraulic chuck, programmable tailstock, parts catcher, chip auger, tool presetter, good spindle, and documented maintenance can command a premium over a machine requiring repairs or lacking production accessories.
For a seller, the final asking price should be adjusted based on the exact year, spindle hours, machine condition, control generation, tooling package, chuck, tailstock, chip-management equipment, and whether the machine can be demonstrated under power.
Related Products
-
HAAS - VF2SS
VIEW MACHINE -
HAAS - SL30T
VIEW MACHINE -
HAAS - UMC1000SS
VIEW MACHINE -
HAAS - ST20
VIEW MACHINE