USED DOOSAN PUMA 2100Y – 2014

The DOOSAN PUMA 2100Y 2014 is a heavy-duty CNC Y-axis horizontal turning center designed for precision turning combined with live-tool milling, drilling, tapping, and off-center machining. The machine uses a rigid box-way construction and a servo-driven BMT turret to provide stable cutting performance while the Y-axis expands the machine’s ability to perform complex machining operations without requiring additional setups.

The 2014 PUMA 2100Y provides a maximum turning diameter of approximately 406 mm (16″) and a maximum turning length of approximately 520 mm (20.5″). It features an 8″ chuck, approximately 65 mm (2.6″) bar capacity, X-axis travel of approximately 260 mm (10.2″), Z-axis travel of approximately 590 mm (23.2″), and Y-axis travel of approximately 105 mm (4.1″). The machine is designed for turning, boring, facing, threading, drilling, tapping, and milling operations.

The spindle is rated for up to approximately 5,000 RPM in the PUMA 2100Y series, with a spindle through-hole of approximately 76 mm (3″). Documented 2014 machines can vary in spindle motor and speed configuration; one current 2014 example is equipped with a 4,500 RPM spindle and 25 HP motor. The machine uses a 12-station turret, with live tooling capable of approximately 5,000–6,000 RPM depending on configuration.

The DOOSAN PUMA 2100Y 2014 is well suited for manufacturers producing hydraulic components, shafts, fittings, automotive components, aerospace parts, oil and gas components, and general precision-machined parts. Its Y-axis and live tooling allow multiple operations to be completed on the same machine, reducing secondary setups and improving production flexibility.

DOOSAN PUMA 2100Y 2014 – AXIS

Specification	Value
X Axis	260 mm (10.2″)
Y Axis	105 mm (4.1″)
Z Axis	590 mm (23.2″)
Y-Axis Range	±52.5 mm (±2.1″)
C Axis	360°
C-Axis Indexing	0.001°
Machine Configuration	CNC Y-Axis Turning Center
Axis Configuration	X / Y / Z / C
Guideway Construction	Box Way

---

DOOSAN PUMA 2100Y 2014 – AXIS TRAVELS / WORK ENVELOPE

Specification	Value
Maximum Swing Over Bed	780 mm (30.7″)
Maximum Swing Over Saddle	Approximately 630 mm (24.8″)
Maximum Turning Diameter	406 mm (16.0″)
Maximum Turning Length	520 mm (20.5″)
X Travel	260 mm (10.2″)
Z Travel	590 mm (23.2″)
Y Travel	105 mm (4.1″)
Y-Axis Movement	±52.5 mm (±2.1″)
Bar Capacity	65 mm (2.6″)
Distance Between Centers	Approximately 610 mm (24″)

---

DOOSAN PUMA 2100Y 2014 – CAPACITY

Specification	Value
Machine Type	CNC Horizontal Turning Center
Chuck Size	8″
Maximum Turning Diameter	16″
Maximum Turning Length	20.5″
Bar Capacity	2.6″
Y-Axis	Yes
C-Axis	Yes
Live Tooling	Yes
Tailstock	Yes
Sub-Spindle	No
Parts Catcher	Configuration Dependent
Tool Presetter	Configuration Dependent

The PUMA 2100Y is specifically designed to add Y-axis machining capability to a production turning center. This allows milling, drilling, and tapping operations to be performed away from the spindle centerline.

---

DOOSAN PUMA 2100Y 2014 – SPINDLE

Specification	Value
Main Spindle Speed	Up to 5,000 RPM
Documented 2014 Configuration	4,500 RPM
Main Spindle Motor	Up to 29.5 HP
Documented 2014 Configuration	25 HP
Spindle Bore / Through Hole	76 mm (3.0″)
Bar Capacity	65 mm (2.6″)
Spindle Nose	A2-6
Maximum Spindle Torque	Approximately 358 Nm
C Axis	360°
Spindle Configuration	Single Spindle

Spindle speed and motor specifications can vary by individual machine configuration. The PUMA 2100Y series uses a rigid spindle design intended for both high-speed and heavy-duty turning operations.

---

DOOSAN PUMA 2100Y 2014 – LIVE TOOLING

Specification	Value
Live Tooling	Yes
Live Tool Speed	Up to 5,000 RPM
Documented Used Configuration	6,000 RPM
Live Tool Motor	Configuration Dependent
Turret	BMT 55P
Driven Tool Stations	Configuration Dependent
Y-Axis Milling	Yes
C-Axis Milling	Yes
Rigid Tapping	Yes
Milling Capability	Yes

The Y-axis and live-tooling combination allows the PUMA 2100Y to perform cross-hole drilling, slotting, face milling, tapping, and other off-center operations without removing the workpiece from the chuck.

---

DOOSAN PUMA 2100Y 2014 – TOOL CHANGER

Specification	Value
Turret Capacity	12 Stations
Optional Turret Capacity	24 Positions
Turret Type	BMT 55P
Tool Stations	12
Driven Tooling	Yes
Maximum Rotary Tool Speed	Up to 5,000 RPM
Tool Management	Servo Driven
Tool Clamping	High Tool Clamping Force

The PUMA 2100Y uses a rigid BMT 55P turret designed to provide strong tool clamping and stable live-tool machining performance.

---

DOOSAN PUMA 2100Y 2014 – CONTROL SYSTEM

Specification	Value
CNC Control	DOOSAN-FANUC i Series
Display	10.4″ Color LCD on documented machine
Programming	ISO G-Code
C-Axis Control	Yes
Y-Axis Control	Yes
Rigid Tapping	Yes
Tool Presetter	Configuration Dependent
USB / PCMCIA	Configuration Dependent
Automatic Tool Offset	Yes
CNC Type	Multi-Axis CNC

A documented 2014 PUMA 2100Y is equipped with a FANUC i-Series CNC control, while the PUMA 2100Y series was also offered with other control configurations depending on market and machine specification.

---

DOOSAN PUMA 2100Y 2014 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Equipped
Coolant Tank & Pump	Equipped
Chip Conveyor	Configuration Dependent
High-Pressure Coolant	Configuration Dependent
Automatic Lubrication	Equipped
Coolant Filtration	Configuration Dependent
Chip Management	Automatic
Mist Collection	Configuration Dependent

Used 2014 machines are available with chip conveyors, coolant systems, and other production-support equipment. One documented 2014 machine includes an LNS chip conveyor.

---

DOOSAN PUMA 2100Y 2014 – POWER REQUIREMENTS

Specification	Value
Electrical Supply	Three Phase
Voltage	220V Configuration Common
Frequency	60 Hz Configuration
Power Requirement	Approximately 36.3 kVA
Main Spindle Motor	Up to 29.5 HP
Live Tool Motor	Configuration Dependent
Air Supply	Required
Connected Load	Configuration Dependent

A documented PUMA 2100Y configuration specifies AC 220V, three-phase, 60 Hz and approximately 36.26 kVA power requirement. Actual electrical requirements should be verified from the individual machine’s electrical documentation.

---

DOOSAN PUMA 2100Y 2014 – DIMENSIONS

Specification	Value
Length	Approximately 125.0″
Width	Approximately 76.6″
Height	Approximately 85.2″
Machine Weight	Approximately 12,000 lbs
Alternate Documented Dimensions	Configuration Dependent
Shipping Weight	Configuration Dependent

Machine dimensions and weight vary depending on chip conveyor, coolant equipment, tooling, and other installed options. A documented 2014 configuration is approximately 125.6″ × 76.6″ × 85.2″ and weighs approximately 12,015 lbs.

---

DOOSAN PUMA 2100Y 2014 – GENERAL INFORMATION

Item	Details
Manufacturer	Doosan
Model	PUMA 2100Y
Year	2014
Machine Type	CNC Y-Axis Horizontal Turning Center
CNC Control	DOOSAN-FANUC i Series
Chuck Size	8″
Maximum Turning Diameter	16″
Maximum Turning Length	20.5″
Bar Capacity	2.6″
Main Spindle Speed	Up to 5,000 RPM
Documented 2014 Spindle Speed	4,500 RPM
Main Spindle Motor	Up to 29.5 HP
Y-Axis	Yes
C-Axis	Yes
Live Tooling	Yes
Live Tool Speed	Up to 5,000–6,000 RPM
Turret Capacity	12 Stations
Tailstock	Yes
Sub-Spindle	No
Chip Conveyor	Configuration Dependent
Tool Presetter	Configuration Dependent
Parts Catcher	Configuration Dependent

---

INDUSTRIES THAT USE DOOSAN PUMA 2100Y 2014

The DOOSAN PUMA 2100Y 2014 is used across industries that require flexible CNC turning and milling capabilities, including:

• Automotive
• Aerospace
• Oil & Gas
• Hydraulic Equipment
• Industrial Machinery
• Defense
• Energy
• Medical Equipment
• General Manufacturing
• Precision Machining
• Agricultural Equipment
• Heavy Equipment

Its combination of Y-axis movement and live tooling makes it particularly useful for components requiring turning along with drilling, milling, tapping, and other off-center operations.

---

TYPICAL PARTS DOOSAN PUMA 2100Y 2014 CAN PRODUCE

The DOOSAN PUMA 2100Y 2014 can produce a wide variety of precision components, including:

• Shafts
• Bushings
• Hydraulic components
• Valve components
• Pump components
• Flanges
• Fittings
• Automotive components
• Aerospace components
• Machine components
• Couplings
• Housings
• Threaded components
• Complex turned and milled parts

Typical operations include turning, facing, boring, threading, grooving, drilling, tapping, cross-hole machining, slotting, face milling, contour milling, and other C-axis/Y-axis machining operations.

---

WHY CHOOSE DOOSAN PUMA 2100Y 2014

The DOOSAN PUMA 2100Y 2014 provides an effective combination of turning capacity and live-tool machining in a compact horizontal turning-center platform. Its 16″ maximum turning diameter, 20.5″ turning length, 8″ chuck, and 2.6″ bar capacity make it suitable for a broad range of production parts.

The Y-axis, C-axis, and live tooling significantly expand the machine’s capabilities compared with a conventional two-axis CNC lathe. Operators can perform off-center drilling, milling, tapping, slotting, and cross-hole operations without transferring the component to another machine.

The rigid box-way construction and BMT turret provide a stable platform for both turning and live-tool operations. For shops looking for a versatile CNC lathe with Y-axis capability, the PUMA 2100Y offers a strong combination of capacity, rigidity, and machining flexibility.

---

WHY BUY USED DOOSAN PUMA 2100Y 2014

Buying a used DOOSAN PUMA 2100Y 2014 can provide Y-axis turning and live-tooling capability at a substantially lower investment than purchasing a comparable new CNC turning center.

Common valuable equipment and options to look for include:

• DOOSAN-FANUC i-Series control
• 8″ hydraulic chuck
• Y-axis
• C-axis
• Live tooling
• BMT 55P turret
• 12-station turret
• Tool presetter
• Parts catcher
• Tailstock
• Chip conveyor
• High-pressure coolant
• Bar-feed interface
• Rigid tapping
• Additional live-tool holders

Before purchasing a used PUMA 2100Y, buyers should inspect spindle condition, chuck operation, Y-axis positioning, C-axis operation, turret indexing, live-tooling performance, ballscrews, box ways, tailstock, coolant system, chip conveyor, hydraulic system, and CNC control. Machine hours, spindle hours, maintenance records, tooling, and included accessories should also be verified.

---

HOW MUCH DOES A USED DOOSAN PUMA 2100Y 2014 COST?

The price of a used DOOSAN PUMA 2100Y 2014 depends on machine condition, hours, spindle condition, tooling, live-tooling package, Y-axis condition, control, chip conveyor, parts catcher, tool presetter, and maintenance history.

Current 2014 PUMA 2100Y machines are available through used machinery dealers, although many are listed as Request Quote. A documented 2014 machine at auction had an opening/minimum bid of approximately $28,500, showing the lower end of the current used market for a machine with a specific condition and configuration.

For a used DOOSAN PUMA 2100Y 2014, a reasonable market estimate is approximately $35,000–$65,000 USD, with exceptionally well-equipped or low-hour machines potentially selling for more.

Machine Condition / Configuration	Estimated Used Price
Higher Hours / Basic Configuration	$35,000–$42,000
Good Condition / Standard Configuration	$42,000–$52,000
Well Equipped / Good Condition	$52,000–$65,000
Low Hours / Extensive Options	$65,000+ Possible

The final value should be based on actual machine hours, spindle condition, Y-axis accuracy, live-tooling condition, tooling package, maintenance history, and included accessories.