USED MORI SEIKI NZX2500/600L – 2012

The MORI SEIKI NZX2500/600L 2012 is a high-performance CNC Twin-Spindle, Twin-Turret Turning Center designed for complete machining of complex components in a single setup. Part of Mori Seiki’s advanced NZX Series, the machine combines two spindles and two independent turrets to perform turning, boring, drilling, threading, and other machining operations efficiently. This configuration is particularly valuable for manufacturers seeking to reduce setup times, improve production throughput, and perform simultaneous machining operations.

The 2012 MORI SEIKI NZX2500/600L features a maximum turning diameter of approximately 366 mm (14.4″) and a maximum turning length of approximately 541 mm (21.3″), depending on configuration. The machine is commonly equipped with 10-inch main and sub-spindle chucks, dual 12-station turrets, and powerful spindle motors. The twin-spindle configuration allows workpieces to be transferred between the main and sub-spindles for complete front- and back-side machining.

The NZX2500/600L is designed with a rigid slant-bed structure and high-precision linear guideways to provide excellent stability and repeatability. The 600L configuration provides an extended turning capacity compared with shorter-bed variants, making it suitable for a broader range of shaft and cylindrical components.

Depending on the specific machine configuration, the MORI SEIKI NZX2500/600L 2012 may include Mori Seiki MAPPS CNC control, live tooling, C-axis capability, chip conveyor, bar feeder, parts catcher, tool presetter, and high-pressure coolant. These features make the machine suitable for both high-volume production and complex precision machining.

Purchasing a used MORI SEIKI NZX2500/600L 2012 provides manufacturers with access to a sophisticated twin-spindle production turning center at a significantly lower investment than purchasing new equipment.

MORI SEIKI NZX2500/600L 2012 – AXIS

MORI SEIKI NZX2500/600L 2012 – AXIS TRAVELS / WORK ENVELOPE

MORI SEIKI NZX2500/600L 2012 – CAPACITY

MORI SEIKI NZX2500/600L 2012 – SPINDLES

MORI SEIKI NZX2500/600L 2012 – TOOL TURRETS

MORI SEIKI NZX2500/600L 2012 – CONTROL SYSTEM

MORI SEIKI NZX2500/600L 2012 – COOLANT / CHIP MANAGEMENT

MORI SEIKI NZX2500/600L 2012 – POWER REQUIREMENTS

MORI SEIKI NZX2500/600L 2012 – DIMENSIONS

MORI SEIKI NZX2500/600L 2012 – GENERAL INFORMATION

INDUSTRIES THAT USE MORI SEIKI NZX2500/600L 2012

The MORI SEIKI NZX2500/600L 2012 is suitable for industries requiring high-volume production and complete machining of complex components, including:

• Automotive
• Aerospace
• Oil and gas
• Hydraulics
• Energy
• Defense
• Industrial equipment
• General precision manufacturing

The twin-spindle and twin-turret architecture is particularly useful for production environments where minimizing handling and setup time is important.

TYPICAL PARTS MORI SEIKI NZX2500/600L 2012 CAN PRODUCE

The MORI SEIKI NZX2500/600L 2012 can manufacture:

• Shafts
• Flanges
• Hydraulic components
• Automotive components
• Valve components
• Pump components
• Bushings
• Couplings
• Bearing components
• Complex turned parts

The machine can perform turning, facing, boring, threading, grooving, drilling, chamfering, and other multi-operation machining processes.

WHY CHOOSE MORI SEIKI NZX2500/600L 2012

The MORI SEIKI NZX2500/600L 2012 offers significant productivity advantages over conventional single-spindle CNC lathes. Its two-spindle and two-turret configuration allows multiple machining operations to be performed simultaneously, reducing cycle times and increasing production capacity.

The ability to transfer parts between the main and sub-spindles also allows manufacturers to complete both sides of a component without manually removing and repositioning the workpiece. This can improve dimensional consistency while reducing operator involvement.

Mori Seiki’s rigid machine construction and precision motion systems further support stable machining performance during continuous production.

WHY BUY USED MORI SEIKI NZX2500/600L 2012

Purchasing a used MORI SEIKI NZX2500/600L 2012 allows manufacturers to obtain an advanced twin-spindle CNC turning center at a substantially lower capital investment than new equipment.

Depending on configuration, used machines may include valuable options such as:

• Mori Seiki MAPPS control
• Twin spindles
• Twin turrets
• Live tooling
• C-axis capability
• 10″ main and sub-spindle chucks
• Chip conveyor
• Bar feeder
• Parts catcher
• Tool presetter
• High-pressure coolant
• Production tooling

Before purchasing, buyers should inspect both spindle systems, turret indexing, synchronization between turrets and spindles, chuck operation, transfer mechanism, ballscrews, guideways, hydraulic system, coolant system, and CNC control. Spindle hours and maintenance records should also be reviewed.

HOW MUCH DOES A USED MORI SEIKI NZX2500/600L 2012 COST?

The value of a used MORI SEIKI NZX2500/600L 2012 depends on machine condition, spindle hours, control configuration, tooling package, live tooling capability, automation accessories, and maintenance history.

Machines equipped with live tooling, C-axis capability, chip conveyors, bar feeders, parts catchers, tool presetters, and complete tooling packages generally command higher resale values.

Depending on condition and configuration, a used MORI SEIKI NZX2500/600L 2012 typically sells within an estimated price range of $90,000 to $160,000 USD. Low-hour machines with advanced options and excellent maintenance records may command higher prices, while machines requiring service or lacking production accessories may sell for less. A properly maintained MORI SEIKI NZX2500/600L 2012 provides excellent value for manufacturers seeking high-productivity twin-spindle and twin-turret CNC turning capability.