USED MORI SEIKI ZT-2500Y (8-Axis CNC Lathe with Live Tool, Sub Spindle Twin Turret)

The Mori Seiki ZT-2500Y is a high-performance multi-axis CNC turning center designed for complex machining operations that require both turning and milling capabilities. This machine is widely known for its twin-spindle, twin-turret configuration with Y-axis and live tooling, allowing manufacturers to perform multiple machining operations simultaneously. This design significantly improves productivity by reducing cycle times and eliminating the need for multiple setups or secondary machines.

The machine provides a maximum turning diameter of approximately 14.9 inches and a maximum distance between spindle faces of around 51.2 inches, making it suitable for machining medium-sized precision components. The ZT-2500Y typically includes dual A2-8 spindles, each capable of reaching speeds of approximately 4,000 RPM. The spindle bore is about 3.5 inches, supporting bar capacities of approximately 2.8 inches.

A key feature of the machine is its Y-axis capability on the upper turret, which enables off-center milling, drilling, and tapping operations directly on the lathe. Combined with C-axis indexing and live tooling, the machine can complete complex parts in a single machining cycle.

The Mori Seiki ZT-2500Y is commonly used in industries such as automotive manufacturing, aerospace component production, medical device machining, and precision engineering. Its multitasking capabilities and rigid construction make it an ideal machine for high-volume production environments.

MORI SEIKI ZT-2500Y SPECIFICATIONS

WHY BUY USED MORI SEIKI ZT-2500Y

Purchasing a used Mori Seiki ZT-2500Y can be a cost-effective solution for manufacturers that need a highly capable multi-axis turning center without the cost of buying a new machine. Multi-tasking CNC lathes with twin spindles and twin turrets are designed to dramatically improve productivity by performing multiple operations simultaneously.

One of the biggest advantages of the ZT-2500Y is its simultaneous machining capability. The machine features two turrets and two spindles, allowing two machining operations to occur at the same time. This reduces cycle times and increases throughput, especially in high-volume production environments.

Another major benefit is the sub-spindle configuration, which allows automatic transfer of parts from the main spindle to the secondary spindle. This allows both sides of a component to be machined in a single setup, eliminating the need for manual repositioning.

The Y-axis and live tooling provide additional machining flexibility. Milling, drilling, and tapping operations can be performed directly on the lathe, reducing the need for secondary milling machines.

Mori Seiki machines are also well known for their reliability and strong mechanical design. Their CNC control systems provide advanced programming capabilities and high-precision motion control.

For manufacturers producing precision shafts, hydraulic fittings, aerospace connectors, or automotive components, a used Mori Seiki ZT-2500Y can deliver advanced machining capability at a significantly lower investment.

HOW MUCH DOES A USED MORI SEIKI ZT-2500Y COST?

The cost of a used Mori Seiki ZT-2500Y depends on several factors including manufacturing year, machine condition, spindle hours, and installed options such as bar feeders, chip conveyors, automation systems, and tooling packages.

Machines manufactured before 2000 are generally the most affordable because they may include older CNC control systems and higher spindle hours. These machines typically sell for approximately $15,000 to $40,000, depending on overall condition and tooling included.

Machines produced between 2000 and 2010 typically feature improved electronics, upgraded control systems, and enhanced machining capabilities. These machines commonly sell between $40,000 and $90,000, especially if they have moderate cutting hours and good maintenance records.

Machines manufactured between 2010 and 2025 may include more advanced CNC controls, improved automation options, and better spindle technology. These machines generally sell between $90,000 and $180,000, depending on configuration and condition.

Machines equipped with additional automation systems such as bar feeders, robotic loaders, or advanced tooling packages may exceed these price ranges in the used CNC equipment market.