USED HAAS DT1 2010

The 2010 Haas DT1 is a compact, high-speed 3-axis drill/tap machining center designed for manufacturers requiring exceptional productivity, rapid tool changes, and precision machining of small to medium-sized components. Unlike the Haas DM Series, which utilizes a CAT40 spindle, the DT1 is equipped with a BT30 taper inline direct-drive spindle, allowing faster acceleration, reduced rotating mass, and quicker tool changes for high-volume production. Its compact footprint, high rapid traverse rates, and rigid construction make it an excellent solution for aerospace, medical, electronics, automotive, and precision machining applications where speed and accuracy are equally important.

The 2010 model features 20 inches of X-axis travel, 16 inches of Y-axis travel, and 15.5 inches of Z-axis travel, providing a versatile machining envelope suitable for a wide variety of production parts. Built on a rigid cast-iron base with precision linear guideways, the DT1 delivers excellent vibration damping, repeatable accuracy, and superior surface finishes while maintaining high cutting speeds. The machine’s compact design allows manufacturers to install multiple units within limited floor space, maximizing production capacity.

Powering the machine is a 10,000 RPM inline direct-drive BT30 spindle producing 15 HP and approximately 46 ft-lb of torque. The lightweight BT30 spindle is optimized for high-speed machining, drilling, tapping, and light milling operations while minimizing spindle vibration. One of the DT1’s greatest productivity advantages is its 20+1 side-mount automatic tool changer, capable of extremely fast tool-to-tool changes of approximately 1.75 seconds, significantly reducing non-cutting time. Combined with rapid traverse rates of 2,400 IPM, the machine delivers excellent cycle times for high-volume manufacturing.

The machine is equipped with the Haas CNC Control, offering intuitive programming, rigid tapping, USB connectivity, Ethernet networking, and proven reliability. Many used 2010 DT1 machines include factory-installed options such as through-spindle coolant, programmable coolant nozzle, chip augers, fourth-axis wiring, probing systems, and high-speed machining software, allowing manufacturers to further improve production efficiency. The BT30 spindle design makes the machine particularly well suited for machining aluminum, plastics, and smaller steel components requiring rapid production.

In the used CNC machinery market, the 2010 Haas DT1 remains one of the most popular compact drill/tap machining centers due to its dependable performance, low operating costs, easy maintenance, and outstanding production speed. Whether producing medical components, electronic housings, precision fixtures, or aerospace brackets, the used Haas DT1 continues to deliver excellent value for manufacturers seeking high-speed machining performance.

HAAS DT1 SPECIFICATIONS

Axis

Axis Travels / Work Envelope

Table

Spindle

Tool Changer

Control System

Coolant / Chip Management

Power Requirements

Dimensions

General Information

WHY BUY USED HAAS DT1 2010

Purchasing a used 2010 Haas DT1 provides manufacturers with an economical way to increase production capacity while benefiting from one of the fastest compact drill/tap centers available. The machine is specifically designed for rapid drilling, tapping, and light milling operations, making it an excellent choice for high-volume production environments.

The lightweight BT30 spindle accelerates quickly, while the high-speed side-mount tool changer minimizes idle time between machining operations. Together with fast rapid traverse rates, these features significantly reduce overall cycle times and improve productivity.

Many used DT1 machines are equipped with valuable factory-installed options such as through-spindle coolant, chip augers, probing systems, fourth-axis wiring, and high-speed machining software. These options further reduce setup times and improve machining efficiency.

Haas machines are widely recognized for their simple maintenance, readily available replacement parts, and strong factory support network. A properly maintained used 2010 DT1 continues to provide dependable production performance and excellent long-term value.

HOW MUCH DOES A USED HAAS DT1 2010 COST?

The market value of a used 2010 Haas DT1 depends on spindle hours, machine condition, installed options, tooling packages, and maintenance history. Machines equipped with through-spindle coolant, probing systems, chip augers, and low spindle hours generally command higher resale prices.

Before purchasing, buyers should inspect spindle condition, automatic tool changer operation, guideways, ballscrews, lubrication system, coolant system, CNC diagnostics, and maintenance documentation. Machines with complete service records generally retain the greatest long-term value.

A used 2010 Haas DT1 typically sells between $22,000 and $42,000, depending on spindle hours, installed options, tooling, maintenance history, and overall machine condition. Well-maintained machines continue to provide excellent value for manufacturers seeking high-speed drilling and tapping capability.

INDUSTRIES THAT USE HAAS DT1

• Aerospace Manufacturing
• Medical Device Manufacturing
• Electronics Manufacturing
• Automotive Manufacturing
• Precision Engineering
• Mold & Die Industry
• Contract Manufacturing
• Tool & Die Shops
• Defense Manufacturing
• General Manufacturing
• Educational Institutions
• Research & Development

TYPICAL PARTS HAAS DT1 CAN PRODUCE

• Medical Components
• Aerospace Brackets
• Electronic Housings
• Precision Fixtures
• Aluminum Plates
• Mold Inserts
• Hydraulic Manifolds
• Precision Connectors
• Machine Components
• Tooling Plates
• Prototype Parts
• Custom Precision Components

WHY CHOOSE HAAS DT1 2010

The 2010 Haas DT1 combines a compact footprint, high-speed BT30 inline direct-drive spindle, rapid 2,400 IPM traverse rates, and an ultra-fast 20+1 side-mount automatic tool changer into a highly productive machining center designed for demanding production environments. Its lightweight spindle and rapid tool changes make it exceptionally efficient for drilling, tapping, and light milling operations.

Manufacturers choose the Haas DT1 because of its proven reliability, low operating costs, ease of programming, and strong service support. For shops focused on maximizing throughput while maintaining precision and repeatability, the used 2010 Haas DT1 remains one of the best compact drill/tap machining centers available, delivering outstanding productivity and long-term return on investment.