The Mazak HQR-200/3 NEO is an advanced multi-tasking CNC turning center designed for ultra-high productivity and complex part machining. As part of Mazak’s latest NEO series, it features a unique three-turret, twin-spindle configuration that significantly enhances simultaneous machining capabilities compared to traditional twin-turret machines. This design enables multiple cutting operations to occur at the same time, dramatically reducing cycle times and increasing throughput.
The machine is equipped with Mazatrol SmoothG³ control, specifically developed to manage the complexity of three-turret operations while maintaining ease of programming and operational safety. It also incorporates advanced features such as AI thermal compensation for improved accuracy and stability during long production runs.
With an 8-inch chuck, a maximum machining diameter of approximately 320 mm, and machining length up to 860 mm, the HQR-200/3 NEO is well-suited for medium-sized precision components. Full milling capability, Y-axis functionality, and automation compatibility (bar feeders, robots, unloaders) make it ideal for lights-out manufacturing. This machine is widely used in high-volume industries such as automotive, aerospace, and precision engineering where efficiency and accuracy are critical.
MAZAK HQR-200/3 NEOSPECIFICATIONS
MAZAK HQR-200/3 NEO – AXIS
Number of Axes: 6+ (X, Z, Y on multiple turrets + C-axis on both spindles)
3-turret, 2-spindle configuration
Two upper turrets and one lower turret
Full Y-axis capability for milling operations
Simultaneous multi-turret machining capability
MAZAK HQR-200/3 NEO – AXIS TRAVELS
X-Axis Travel: Approx. 200 mm class
Y-Axis Travel: Approx. ±100 mm
Z-Axis Travel: Approx. 860 mm
Designed for extended reach and multi-operation machining
MAZAK HQR-200/3 NEO – CAPACITY
Maximum Turning Diameter: Approx. 320 mm
Maximum Turning Length: Approx. 860 mm
Bar Capacity: Approx. 65 mm (standard), up to 102 mm (optional)
Chuck Size: 8 inch
Suitable for shaft and chuck work
MAZAK HQR-200/3 NEO – SPINDLE
Number of Spindles: 2
High-performance main and sub spindle
Spindle Bore: Approx. 76 mm
Full C-axis indexing on both spindles
Capable of simultaneous dual-part machining
MAZAK HQR-200/3 NEO – TABLE
No traditional table (turning center design)
Twin spindle chuck workholding
Automatic part transfer between spindles
Compatible with bar feeders and automation systems
Designed for continuous production
MAZAK HQR-200/3 NEO – TOOL TURRET
Number of Turrets: 3 (2 upper + 1 lower)
Stations per Turret: 12 or optional 16
Live Tooling Capability: Yes
Milling, drilling, and tapping supported
Drum-style turret design for high rigidity
MAZAK HQR-200/3 NEO – FEEDRATES
High-speed rapid traverse across all axes
Optimized for simultaneous multi-turret cutting
Balanced cutting reduces vibration
Reduced non-cutting time due to parallel operations
MAZAK HQR-200/3 NEO – COOLANT & CHIP MANAGEMENT
Flood coolant system standard
Optional high-pressure coolant
Integrated chip conveyor
Efficient chip evacuation system
Designed for long unattended machining cycles
MAZAK HQR-200/3 NEO – CONTROL SYSTEM
Mazatrol SmoothG³ CNC Control
Designed specifically for 3-turret synchronization
Conversational programming capability
EIA/ISO (G-code) compatibility
Ai Thermal Shield for thermal stability
MAZAK HQR-200/3 NEO – POWER & AIR REQUIREMENTS
Power Requirement: Approx. 45–65 kVA
Voltage: 3-phase industrial supply
Air Requirement: Clean, dry compressed air
Air Pressure: Approx. 5–7 bar
MAZAK HQR-200/3 NEO – DIMENSIONS
Machine Length: Approx. 3,500–4,000 mm
Machine Width: Approx. 2,500–3,000 mm
Machine Height: Approx. 2,500 mm
Machine Weight: Approx. 12,000–14,000 kg
MAZAK HQR-200/3 NEO – GENERAL INFORMATION
Machine Type: Multi-tasking CNC turning center
3-turret / 2-spindle architecture
Designed for high-volume, complex part production
Enables DONE-IN-ONE machining
Supports automation and lights-out manufacturing
Significantly reduces cycle time vs 2-turret machines
INDUSTRIES THAT USE MAZAK HQR-200/3 NEO
Automotive manufacturing
Aerospace components
Oil & gas components
Medical device manufacturing
High-volume precision engineering
TYPICAL PARTS MAZAK HQR-200/3 NEO CAN PRODUCE
Complex shafts and stepped components
Hydraulic and valve components
Automotive drivetrain parts
Precision housings and fittings
Multi-operation turned and milled parts
WHY CHOOSE MAZAK HQR-200/3 NEO
3-turret design dramatically reduces cycle time
Simultaneous machining of multiple parts
Increased productivity vs twin-turret machines
Advanced SmoothG³ control for complex operations
Excellent for high-volume, automated production
High rigidity and thermal stability for precision machining
WHY BUY USED MAZAK HQR-200/3 NEO
Buying a used Mazak HQR-200/3 NEO offers a significant opportunity to access one of the most advanced multi-tasking CNC platforms at a reduced cost. As a newer generation machine, it incorporates cutting-edge technology such as three-turret simultaneous machining and SmoothG³ control, which can drastically improve productivity compared to older twin-turret machines. This allows manufacturers to complete more operations in a single cycle, reducing handling time and increasing output.
One of the main advantages of buying used is cost efficiency. New NEO machines command premium pricing due to their advanced capabilities, but pre-owned units—especially those with moderate cutting time—can provide similar performance at a lower investment. Additionally, used machines are typically available immediately, eliminating long lead times associated with new equipment orders.
Cutting time is a crucial factor when evaluating a used HQR-200/3 NEO. Machines with lower spindle hours retain higher accuracy and longer service life, making them more desirable even if they are a few years older. Furthermore, many used machines come equipped with automation systems and tooling packages, adding further value. Overall, purchasing used allows manufacturers to leverage next-generation machining technology while optimizing capital expenditure and improving production efficiency.
HOW MUCH DOES A USED MAZAK HQR-200/3 NEOCOST?
The cost of a used Mazak HQR-200/3 NEO varies depending on year of manufacture, configuration, condition, and especially cutting time. Since this is a relatively new model introduced around 2023–2024, machines built before 2000 or even 2000–2010 do not exist for this specific model. However, for comparison, older multi-turret Mazak machines with similar functionality may range from $60,000 to $150,000, typically with high cutting hours and outdated controls.
For early NEO-series machines from 2023 to 2025, used pricing typically ranges from $300,000 to $600,000 or more, depending on configuration, automation integration, and tooling packages. Machines with low cutting time command premium pricing due to their near-new condition, advanced control systems, and extended service life.
Cutting time plays a critical role in valuation. A machine with minimal spindle hours can retain most of its original accuracy and reliability, making it highly desirable in the secondary market. Conversely, heavily used machines may be priced lower but could require maintenance or component replacement sooner. Because the HQR-200/3 NEO is a high-end, next-generation machine, pricing remains strong in the used market, and buyers should carefully evaluate usage history alongside features to determine true value.
