USED OKUMA SPACETURN LB2000EXII-MY C – 2008

The OKUMA SPACETURN LB2000EXII-MY C 2008 is a CNC Multi-Tasking Turning Center designed to combine precision turning with live-tool milling, drilling, tapping, and Y-axis machining in a single setup. The MY configuration adds driven tooling and Y-axis capability, allowing the machine to perform off-center machining and secondary milling operations without transferring the workpiece to another machine. This can reduce setups, improve feature-to-feature accuracy, and shorten overall production time.

The 2008 OKUMA SPACETURN LB2000EXII-MY C is based on a compact slant-bed design with approximately 580 mm (22.83″) swing over the bed, 260 mm (10.24″) X-axis travel, 100 mm (3.94″) Y-axis travel, and configuration-dependent Z-axis travel of approximately 350–565 mm (13.78–22.24″). The MY configuration provides a 360° C-axis and driven-tool spindle capability, with the milling spindle operating up to approximately 6,000 RPM.

The machine uses a 6,000 RPM main spindle, approximately 62 mm (2.44″) standard spindle bore, a 12-position M-V12 NC turret, and driven tooling. The milling-tool spindle is specified at approximately 45–6,000 RPM, with a 5.5/3.7 kW (7.5/5 HP) motor configuration. A 2008 machine listing for this exact model identifies an OSP-P200L CNC control, 6″ three-jaw chuck, bar feed, chip conveyor, and tailstock.

The OKUMA SPACETURN LB2000EXII-MY C 2008 is an excellent choice for manufacturers producing shafts, fittings, hydraulic components, valve components, pump parts, automotive components, flanges, bushings, and other precision parts requiring turning combined with milling, drilling, tapping, and off-center machining.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – AXIS

Specification	Value
X Axis	260 mm (10.24″)
Y Axis	100 mm (3.94″)
Z Axis	Approximately 350–565 mm (13.78–22.24″)
C Axis	360°
Y-Axis Range	+50 / -50 mm
Machine Configuration	CNC Multi-Tasking Turning Center
Axis Configuration	X / Y / Z / C
B Axis	Not Standard

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – AXIS TRAVELS / WORK ENVELOPE

Specification	Value
Swing Over Bed	580 mm (22.83″)
Swing Over Saddle	470 mm (18.50″)
Maximum Turning Diameter	Approximately 360 mm (14.17″)
Maximum Work Length	Configuration Dependent
X Axis Travel	260 mm (10.24″)
Y Axis Travel	100 mm (3.94″)
Z Axis Travel	Approximately 350–565 mm
C Axis	360°
Main Spindle Bore	62 mm (2.44″)
Spindle Nose	Ø140 Flat
Chuck	Approximately 6″

The official LB2000 EX II specifications list the MY version with C × 250 and C × 450 configurations, which is why the exact work length should be verified from the individual machine configuration.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – CAPACITY

Specification	Value
Machine Type	CNC Multi-Tasking Turning Center
Main Chuck	Approximately 6″
Maximum Turning Diameter	Approximately 360 mm (14.17″)
Swing Over Bed	580 mm (22.83″)
Main Spindle Bore	62 mm (2.44″)
Main Spindle Speed	6,000 RPM
X-Axis Travel	260 mm
Y-Axis Travel	100 mm
Z-Axis Travel	Configuration Dependent
C-Axis	360°
Live Tooling	Yes
Milling Capability	Yes
Driven Tool Positions	12
Sub-Spindle	No
Tailstock	Configuration Dependent

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – SPINDLE

Specification	Value
Main Spindle Speed	50–6,000 RPM
Main Spindle Motor	11/7.5 kW (15/10 HP)
Spindle Nose	Ø140 Flat
Standard Spindle Bore	62 mm (2.44″)
Optional Big-Bore	80 mm
Front Bearing Diameter	Approximately 100 mm
Speed Ranges	2 Automatic Ranges
C Axis	360°
Spindle Configuration	Main Spindle

The LB2000 EX II uses a compact high-speed spindle system with automatic speed-range switching, while optional big-bore configurations can increase spindle bore capacity.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – MILLING SPINDLE

Specification	Value
Milling Spindle Speed	45–6,000 RPM
Milling Spindle Motor	5.5/3.7 kW (7.5/5 HP)
Tool Configuration	M-V12 Radial
Driven Tools	12
Y-Axis	Yes
C-Axis	360°
Milling Capability	Yes
Drilling	Yes
Tapping	Yes
Cross Milling	Yes
Face Milling	Yes

The live-tool spindle gives the MY configuration the ability to perform secondary milling operations while the workpiece remains clamped in the turning spindle.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – TOOL CHANGER / TURRET

Specification	Value
Turret Type	M-V12 NC Turret
Tool Capacity	12 Tools
Driven Tool Positions	12
Turret Indexing	Approximately 0.1 sec/index
OD Tool Shank	20 mm (0.79″)
ID Tool Shank Diameter	32 mm (1.26″)
Tool Management	Automatic
Live Tooling	Yes
Tool Interface	M-V12

The M-V12 turret provides the tooling flexibility needed for turning together with driven-tool operations such as drilling, tapping, cross milling, and face machining.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – CONTROL SYSTEM

Specification	Value
CNC Control	OKUMA OSP-P200L
Programming	ISO G-Code / Okuma Programming
CNC Type	Lathe CNC
C-Axis Control	Yes
Y-Axis Control	Yes
Live Tool Control	Yes
Tool Offset Management	Yes
Work Coordinate Management	Yes
Diagnostic Functions	Yes
Data Transfer	Configuration Dependent
Program Storage	Configuration Dependent

A 2008 listing for the exact SPACETURN LB2000EXII-MY C identifies the machine with an OSP-P200L CNC control. This is consistent with the control generation used on the LB EX II platform during that period.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – FEEDRATES

Specification	Value
X Rapid Traverse	25 m/min (984 IPM)
Z Rapid Traverse	30 m/min (1,181 IPM)
Y Rapid Traverse	Approximately 12.5 m/min
C-Axis Rapid	Approximately 200 RPM
Cutting Feedrate	Configuration Dependent
Maximum Feedrate	Configuration Dependent
X-Axis Drive	Approximately 2.8 kW
Z-Axis Drive	Approximately 3.5 kW
Y-Axis Drive	Configuration Dependent

The published LB2000 EX II specifications provide rapid traverse rates of 25 m/min on X and 30 m/min on Z, while MY configurations add Y-axis movement.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Standard
Coolant System	Yes
Chip Conveyor	Configuration Dependent / Equipped on Some Machines
Chip Bucket	Configuration Dependent
Spindle ID Coolant	Option
Shower Coolant	Option
Sludge Control	Configuration Dependent
Coolant Flow Detection	Configuration Dependent
Coolant Level Detection	Configuration Dependent
Mist Collector	Optional
Coolant Gun	Optional
Automatic Lubrication	Standard

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – POWER REQUIREMENTS

Specification	Value
Electrical Supply	Three Phase
Voltage	Configuration Dependent
Frequency	50/60 Hz
Main Spindle Motor	11/7.5 kW
Milling Motor	5.5/3.7 kW
X-Axis Motor	Approximately 2.8 kW
Z-Axis Motor	Approximately 3.5 kW
Air Supply	Required
Hydraulic System	Configuration Dependent
Transformer	Configuration Dependent

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – DIMENSIONS

Specification	Value
Machine Height	Approximately 1,839 mm (72″)
Length	Configuration Dependent
Width	Configuration Dependent
Side Chip Discharge Footprint	Approximately 1,980 × 1,734 mm
Rear Chip Discharge Footprint	Approximately 1,890 × 1,984 mm
Machine Weight	Approximately 3,350–4,350 kg
Approximate Weight	7,370–9,570 lbs
Floor Space	Configuration Dependent

The published dimensions vary with the machine’s work-length and chip-discharge configuration.

---

OKUMA SPACETURN LB2000EXII-MY C 2008 – GENERAL INFORMATION

Item	Details
Manufacturer	Okuma
Model	SPACETURN LB2000EXII-MY C
Year	2008
Machine Type	CNC Multi-Tasking Turning Center
CNC Control	OSP-P200L
Main Chuck	Approximately 6″
Swing Over Bed	580 mm
Maximum Turning Diameter	Approximately 360 mm
Main Spindle Bore	62 mm
Main Spindle Speed	6,000 RPM
Main Spindle Motor	11/7.5 kW
X-Axis Travel	260 mm
Y-Axis Travel	100 mm
Z-Axis Travel	Configuration Dependent
C-Axis	360°
Milling Spindle	45–6,000 RPM
Milling Spindle Motor	5.5/3.7 kW
Turret	M-V12
Tool Capacity	12 Tools
Driven Tools	12
Tailstock	Configuration Dependent
Bar Feeder	Configuration Dependent
Chip Conveyor	Configuration Dependent

---

INDUSTRIES THAT USE OKUMA SPACETURN LB2000EXII-MY C 2008

The OKUMA SPACETURN LB2000EXII-MY C 2008 is well suited for industries that require turning combined with drilling, milling, tapping, and other secondary operations, including:

• Automotive
• Aerospace
• Hydraulic and pneumatic
• Oil & gas
• Energy
• Medical
• Defense
• Industrial machinery
• Pump and valve manufacturing
• General precision manufacturing
• Job shops
• Contract manufacturing

Its combination of Y-axis movement, C-axis control, and driven tooling makes it particularly useful for complex small- and medium-sized components requiring off-center machining.

---

TYPICAL PARTS OKUMA SPACETURN LB2000EXII-MY C 2008 CAN PRODUCE

The OKUMA SPACETURN LB2000EXII-MY C 2008 can manufacture:

• Shafts
• Bushings
• Hydraulic components
• Valve components
• Pump components
• Fittings
• Flanges
• Automotive components
• Aerospace fittings
• Couplings
• Bearing components
• Precision sleeves
• Complex turned and milled parts

The machine can perform turning, facing, boring, threading, grooving, drilling, tapping, cross-hole machining, face drilling, milling, contouring, and other multi-tasking operations.

---

WHY CHOOSE OKUMA SPACETURN LB2000EXII-MY C 2008

The OKUMA SPACETURN LB2000EXII-MY C 2008 is an excellent choice for manufacturers looking for a compact CNC multitasking machine capable of combining turning and live-tool machining in a single setup.

Its 100 mm Y-axis travel allows the cutting tool to move away from the spindle centerline, making off-center drilling, milling, slotting, and other complex features possible without moving the component to a separate machining center. The 360° C-axis adds controlled spindle positioning for these secondary operations.

The 6,000 RPM milling spindle, 12-position M-V12 turret, and 6,000 RPM main spindle provide a useful combination for production machining. This configuration can reduce setups, minimize workpiece handling, and improve the positional relationship between turned and milled features.

---

WHY BUY USED OKUMA SPACETURN LB2000EXII-MY C 2008

Purchasing a used OKUMA SPACETURN LB2000EXII-MY C 2008 allows manufacturers to acquire a Japanese-built CNC turn-mill center while reducing the capital investment compared with purchasing a new multitasking machine.

Many used machines may include valuable options such as:

• OSP-P200L CNC control
• 6″ three-jaw chuck
• Y-axis
• C-axis
• M-V12 driven-tool turret
• 12 driven tools
• 6,000 RPM main spindle
• 6,000 RPM milling spindle
• Bar feeder
• Chip conveyor
• Tailstock
• Tool presetter
• Parts catcher
• Coolant system
• Spindle ID coolant
• Automatic lubrication
• Mist collector
• Complete driven-tool holders

A 2008 example listed for sale is equipped with the OSP-P200L control, bar feeder, chip conveyor, tailstock, and 6″ three-jaw chuck, illustrating the type of production package that may be found on machines from this period.

Before purchasing, buyers should inspect the main spindle, live-tool spindle, Y-axis positioning, C-axis accuracy, turret indexing, ballscrews, linear guides, chuck, tailstock, hydraulic system, CNC control, coolant system, chip conveyor, bar feeder, and overall machine geometry.

---

HOW MUCH DOES A USED OKUMA SPACETURN LB2000EXII-MY C 2008 COST?

The value of a used OKUMA SPACETURN LB2000EXII-MY C 2008 depends heavily on spindle hours, Y-axis accuracy, live-tooling condition, C-axis positioning, turret condition, CNC control, bar feeder, chip conveyor, tailstock, tooling package, and maintenance history.

Machines equipped with Y-axis, C-axis, driven tooling, bar feeder, chip conveyor, tailstock, tool presetter, and complete tooling generally command higher resale values.

A 2008 listing for the exact OKUMA SPACETURN LB2000EXII-MY C was offered at $22,500 USD, equipped with OSP-P200L control, bar feed, chip conveyor, tailstock, and a 6″ three-jaw chuck. For used-equipment listing purposes, a used OKUMA SPACETURN LB2000EXII-MY C 2008 can typically be expected to sell in the approximately $20,000 to $40,000 USD range, with the actual value depending heavily on condition, spindle hours, options, tooling, and location.

A low-hour machine with a healthy main spindle, accurate Y- and C-axis operation, functioning live tooling, reliable OSP control, complete tooling, bar feeder, chip conveyor, and documented maintenance may command a premium. A machine requiring spindle, live-tooling, turret, ballscrew, control, or electrical repairs may sell for considerably less.