MAZAK QUICKTURN NEXUS 300
USED MAZAK QUICK TURN NEXUS 300
The MAZAK QUICK TURN NEXUS 300 is a heavy-duty CNC turning center designed for production machining of medium-to-large diameter components. It combines a rigid horizontal turning platform with a powerful main spindle, large work envelope, automatic turret, and MAZATROL CNC control. Documented QTN 300 machines are available in configurations with approximately 26.77 to 29.5 inches of swing, maximum turning diameters around 16.5 inches, and machining lengths approaching 48 to 50 inches, depending on the exact machine configuration.
The QTN 300 is positioned above smaller QUICK TURN models and is intended for shops that need greater turning diameter, spindle capacity, and cutting power. Used examples have been documented with a 35 HP spindle motor, 4,000 RPM maximum spindle speed, A2-8 spindle nose, and spindle bore of approximately 3.46 inches. These characteristics give the machine the power and rigidity needed for steel, stainless steel, tool steel, aluminum, and other industrial materials.
A major advantage of the QUICK TURN NEXUS 300 is its ability to combine a relatively large turning envelope with a conventional 2-axis CNC configuration. The machine does not require the complexity of a mill-turn center when the production requirement is primarily turning, facing, boring, threading, grooving, and related operations.
The QTN 300 has been documented with a 12-station automatic turret, allowing multiple turning, boring, threading, grooving, and finishing tools to remain loaded during production. Automatic tool indexing reduces setup and operator intervention while allowing several machining operations to be completed in a single cycle.
The machine can also be equipped with a programmable tailstock, automatic tool eye, chip conveyor, coolant system, and other production accessories. A documented 2006 QTN 300 includes a programmable tailstock and quill, automatic tool eye, side-discharge chip conveyor, and MAZATROL Fusion 640T control.
The MAZATROL 640T NEXUS control is another defining feature of this generation of QUICK TURN NEXUS machines. Used QTN 300 examples have been documented with MAZATROL 640T controls, including machines with EIA/ISO capability, Ethernet, RS232 communication, and other production-oriented options.
The QUICK TURN NEXUS 300 is particularly useful for manufacturers producing shafts, bushings, flanges, housings, rollers, hydraulic components, machine components, and other rotational parts. Its combination of a large chuck, substantial spindle motor, automatic turret, and long machining capacity makes it suitable for both job-shop and repetitive production environments.
For a used CNC buyer, the QTN 300 can be an attractive alternative to smaller turning centers when additional spindle power and work envelope are required. However, because used machines are available with different chuck sizes, center distances, spindle speeds, controls, and accessories, the exact machine configuration should always be verified before purchase.
MAZAK QUICK TURN NEXUS 300 – AXIS
The standard QUICK TURN NEXUS 300 is a 2-axis CNC turning center, using X-axis movement for radial tool positioning and Z-axis movement for longitudinal movement along the workpiece.
The X axis controls cutting diameter while the Z axis controls cutting length. This configuration is well suited to standard CNC turning operations such as outside-diameter turning, facing, boring, threading, grooving, chamfering, and taper turning.
Documented QTN 300 machines show approximately 8.85 inches of X-axis travel and approximately 49 inches of Z-axis travel on the longer-bed configuration.
| Specification | Details |
|---|---|
| Machine Type | CNC Turning Center |
| Axis Configuration | 2 Axis |
| Controlled Axes | X / Z |
| X Axis | Radial Tool Movement |
| Z Axis | Longitudinal Tool Movement |
| Y Axis | No |
| C Axis | No |
| Main Spindle | Yes |
| Sub Spindle | No |
| Live Tooling | No on standard documented configuration |
| Automatic Turret | Yes |
| Tailstock | Yes |
| Programmable Tailstock | Configuration Dependent |
| Automatic Tool Setting | Configuration Dependent |
| CNC Turning | Yes |
The 2-axis arrangement makes the QTN 300 relatively straightforward to program and operate compared with more complex multi-axis turning centers.
MAZAK QUICK TURN NEXUS 300 – AXIS TRAVELS / WORK ENVELOPE
The QTN 300 provides a substantial turning envelope for a conventional 2-axis CNC lathe. Documented machines have approximately 26.77 inches of swing and maximum cutting diameters around 16.53 inches. Some listings report approximately 29.5 inches of maximum swing depending on the specific configuration.
The longer-bed configuration provides approximately 48.23 inches of machining length, making the machine capable of handling relatively long shafts and other cylindrical components.
| Specification | Details |
|---|---|
| Maximum Swing | Approximately 26.77–29.5 inches |
| Maximum Turning Diameter | Approximately 16.53 inches |
| Maximum Machining Length | Approximately 48.23 inches |
| X Axis Travel | Approximately 8.85–10.13 inches |
| Z Axis Travel | Approximately 48.75–49 inches |
| Center Distance | Configuration Dependent |
| Long-Bed Configuration | Approximately 48-inch cutting length documented |
| Standard Machining Diameter | Configuration Dependent |
| Maximum Diameter | Tool-clearance dependent |
| Maximum Length | Tailstock / bed configuration dependent |
| Work Envelope | Configuration Dependent |
| Tailstock Clearance | Configuration Dependent |
Actual maximum cutting dimensions depend on the tooling arrangement, chuck, tailstock position, workpiece geometry, and exact machine configuration.
MAZAK QUICK TURN NEXUS 300 – CAPACITY / CHUCK
The QTN 300 is commonly found with a 10- or 12-inch chuck, depending on configuration. A documented 2005 QTN 300 is equipped with a 12-inch chuck, while other documented machines use a 10-inch hydraulic chuck.
The larger chuck options provide the workholding capacity necessary for the machine’s relatively large turning envelope.
| Specification | Details |
|---|---|
| Chuck Type | 3-Jaw / Configuration Dependent |
| Chuck Size | 10 or 12 inches documented |
| Larger Chuck | 12 inches documented |
| Spindle Nose | A2-8 |
| Bar Capacity | Approximately 3.0–3.5 inches |
| Spindle Bore | Approximately 3.46 inches |
| Tailstock | Yes |
| Tailstock Center | MT No. 4 or MT No. 5 documented |
| Programmable Tailstock | Configuration Dependent |
| Hydraulic Chuck | Configuration Dependent |
| Manual Chuck | Available on some machines |
| Steady Rest | Optional / Configuration Dependent |
| Workholding | Configuration Dependent |
| Parts Catcher | Optional / Configuration Dependent |
The approximately 3.5-inch bar capacity is particularly useful for shaft and bar-stock production, although the actual capacity depends on the spindle configuration and drawtube arrangement.
MAZAK QUICK TURN NEXUS 300 – SPINDLE
The QTN 300 uses a substantial main spindle designed for both production turning and heavy cutting. Documented machines have been equipped with a 35 HP spindle motor, while the documented spindle speed is approximately 4,000 RPM.
The combination of high spindle power and moderate maximum speed gives the machine useful torque for larger-diameter work while still providing enough speed for finishing and smaller components.
| Specification | Details |
|---|---|
| Spindle Orientation | Horizontal |
| Spindle Type | Main Turning Spindle |
| Spindle Motor | 35 HP documented |
| Spindle Power | Approximately 26.1 kW |
| Maximum Spindle Speed | 4,000 RPM documented |
| Spindle Nose | A2-8 |
| Spindle Bore | Approximately 3.46 inches |
| Bar Capacity | Approximately 3–3.5 inches |
| Spindle Torque | Configuration Dependent |
| Speed Range | Configuration Dependent |
| Heavy Turning | Yes |
| Steel Machining | Yes |
| Stainless Steel Machining | Yes |
| Aluminum Machining | Yes |
| Tool Steel Machining | Yes |
Some QTN 300 listings report lower maximum spindle speeds, such as 3,300 RPM, showing that spindle configuration can vary between individual machines.
MAZAK QUICK TURN NEXUS 300 – TOOL CHANGER / TURRET
The QTN 300 is equipped with an automatic turret designed to provide multiple cutting tools for a complete turning cycle. Documented machines have a 12-station turret, with approximately 0.2-second indexing time for one position on a documented configuration.
| Specification | Details |
|---|---|
| Tool Changer | Automatic Turret |
| Turret Type | Drum Turret on documented machine |
| Tool Stations | 12 |
| Turret Index Time | Approximately 0.2 sec / position |
| Tool Shank Size | Approximately 1 inch square documented |
| Boring Bar Diameter | Approximately 1.5–2 inches configuration dependent |
| Turning Tools | Yes |
| Boring Tools | Yes |
| Threading Tools | Yes |
| Grooving Tools | Yes |
| Facing Tools | Yes |
| Tool Presetter | Configuration Dependent |
| Automatic Tool Eye | Documented |
| Live Tooling | No on standard QTN 300 |
| Tool Management | CNC Controlled |
A 12-station turret provides sufficient tool capacity for many production parts while keeping the machine’s tooling system relatively simple.
MAZAK QUICK TURN NEXUS 300 – CONTROL SYSTEM
The QTN 300 is commonly associated with the MAZATROL 640T NEXUS CNC control. A documented 2005 machine uses MAZATROL PC-Fusion 640T with a 10.4-inch color LCD, while other machines are identified specifically as MAZATROL 640T NEXUS.
The control can support conversational MAZATROL programming while also providing EIA/ISO programming capabilities on appropriately equipped machines.
| Specification | Details |
|---|---|
| CNC Control | MAZATROL |
| Documented Control | MAZATROL 640T NEXUS |
| Alternate Description | MAZATROL PC-FUSION 640T |
| Display | 10.4-inch Color LCD documented |
| Axis Control | X / Z |
| Conversational Programming | Yes |
| EIA/ISO Programming | Configuration Dependent |
| Tool Offset Management | Yes |
| Work Offset Management | Yes |
| Tool Wear Compensation | Yes |
| Background Tool Path Check | Documented |
| Machining Navi Monitor | Documented |
| Ethernet | Configuration Dependent |
| RS232 | Documented |
| Memory Card Interface | Configuration Dependent |
| Automatic Tool Eye | Configuration Dependent |
A documented 2005 machine includes the EIA/ISO option package, Ethernet, IC memory-card interface, PCM/CIA interface, and RS232 interface.
MAZAK QUICK TURN NEXUS 300 – COOLANT / CHIP MANAGEMENT
The QTN 300 is intended for production turning and can be equipped with a dedicated coolant system and chip conveyor. A documented machine has a coolant system rated at approximately 118 PSI and 16 GPM, together with a chip conveyor.
Chip management is particularly important when the machine is used for continuous turning of steel and other materials that produce large volumes of chips.
| Specification | Details |
|---|---|
| Coolant System | Yes |
| Flood Coolant | Yes |
| Coolant Pressure | Approximately 118 PSI documented |
| Coolant Flow | Approximately 16 GPM documented |
| Coolant Tank | Yes |
| Chip Conveyor | Configuration Dependent |
| Side-Discharge Conveyor | Documented |
| Chip Removal | Automatic / Conveyor Dependent |
| Filtration | Configuration Dependent |
| High-Pressure Coolant | Configuration Dependent |
| Through-Tool Coolant | Configuration Dependent |
| Splash Guarding | Yes |
| Full Coverage Guarding | Documented |
| Washdown | Configuration Dependent |
The exact coolant pump and chip-conveyor specifications should be verified against the individual machine.
MAZAK QUICK TURN NEXUS 300 – POWER REQUIREMENTS
Electrical requirements depend on the exact spindle motor, coolant equipment, chip conveyor, control, hydraulic system, transformer, and accessories installed on the machine.
A documented QTN 300 uses a 35 HP / approximately 26.1 kW spindle motor, but total connected electrical load will be higher once auxiliary systems are included.
| Specification | Details |
|---|---|
| Spindle Motor | 35 HP documented |
| Spindle Motor Power | Approximately 26.1 kW |
| CNC Control Power | Configuration Dependent |
| Hydraulic System | Configuration Dependent |
| Coolant Pump | Configuration Dependent |
| Chip Conveyor | Configuration Dependent |
| Tool Presetter | Configuration Dependent |
| Automatic Tool Eye | Configuration Dependent |
| Transformer | Configuration Dependent |
| Voltage | Verify Machine Nameplate |
| Phase | Verify Machine Nameplate |
| Frequency | Verify Machine Nameplate |
| Total Connected Load | Verify Individual Machine |
The machine’s electrical nameplate should always be used when preparing for installation.
MAZAK QUICK TURN NEXUS 300 – DIMENSIONS
The QTN 300 requires substantially more floor space than smaller QUICK TURN models. A documented long-bed QTN 300 has overall dimensions of approximately 137 inches × 80 inches × 79 inches and a machine weight of approximately 17,200 pounds.
Another documented configuration lists approximately 135.8 × 80.7 inches of floor-space requirements and a weight of approximately 16,314 pounds.
| Specification | Details |
|---|---|
| Approximate Machine Length | 136–137 inches documented |
| Approximate Machine Width | 80 inches |
| Approximate Machine Height | 79 inches |
| Machine Weight | Approximately 16,300–17,200 lb documented |
| Floor Space | Configuration Dependent |
| Chip Conveyor Space | Additional space required |
| Shipping Weight | Verify Individual Machine |
| Shipping Dimensions | Verify Individual Machine |
| Service Clearance | Required |
| Loading Access | Required |
| Door Clearance | Verify Individual Machine |
The chip conveyor can extend beyond the main machine footprint, so installation planning should account for the complete machine and accessories.
MAZAK QUICK TURN NEXUS 300 – GENERAL INFORMATION
| Specification | Details |
|---|---|
| Manufacturer | MAZAK |
| Model | QUICK TURN NEXUS 300 |
| Machine Type | CNC Turning Center |
| Machine Category | Lathe |
| Axis Configuration | 2 Axis |
| X Axis Travel | Approximately 8.85–10.13 inches |
| Z Axis Travel | Approximately 48.75–49 inches |
| Maximum Swing | Approximately 26.77–29.5 inches |
| Maximum Turning Diameter | Approximately 16.53 inches |
| Machining Length | Approximately 48.23 inches documented |
| Chuck Size | 10–12 inches documented |
| Spindle Bore | Approximately 3.46 inches |
| Bar Capacity | Approximately 3–3.5 inches |
| Spindle Nose | A2-8 |
| Spindle Motor | 35 HP documented |
| Maximum Spindle Speed | Up to 4,000 RPM documented |
| Turret | 12 Station |
| Tailstock | Yes |
| Programmable Tailstock | Configuration Dependent |
| Automatic Tool Eye | Configuration Dependent |
| Chip Conveyor | Configuration Dependent |
| CNC Control | MAZATROL 640T NEXUS |
| Live Tooling | No on standard configuration |
| Sub Spindle | No |
| Machine Weight | Approximately 16,000–17,200 lb documented |
| Exact Specifications | Verify Individual Machine |
INDUSTRIES THAT USE MAZAK QUICK TURN NEXUS 300
Automotive Manufacturing
The QTN 300 can produce automotive shafts, hubs, bushings, spacers, brake-related components, transmission components, and other rotational parts. Its 35 HP spindle provides the cutting capability required for production work in steel and other common automotive materials.
Aerospace Manufacturing
Aerospace suppliers can use the QTN 300 for shafts, fittings, housings, sleeves, brackets, and other turned components. The machine’s long machining capacity is useful for components where length is a significant portion of the overall geometry.
Oil and Gas
The machine’s large spindle bore and turning diameter make it suitable for oil-and-gas components such as sleeves, fittings, shafts, flanges, and other cylindrical components.
Hydraulic Manufacturing
Hydraulic manufacturers can use the QTN 300 for cylinders, valve components, pistons, sleeves, manifolds, and precision turned fittings.
Industrial Machinery
Manufacturers of pumps, compressors, gearboxes, machine tools, and automation equipment can use the machine for shafts, housings, rollers, bushings, and other mechanical components.
Heavy Equipment
Construction and agricultural equipment manufacturers can use the QTN 300 for pins, shafts, hubs, bushings, rollers, and other large rotational components.
General Job Shops
Job shops can benefit from the machine’s broad turning envelope and 12-station turret. It can accommodate a variety of customer work without requiring the specialized configuration of a dedicated production lathe.
Contract Manufacturing
Contract manufacturers can use the QTN 300 for repetitive production runs where consistent turning accuracy, automatic tool indexing, coolant delivery, and chip removal are important.
TYPICAL PARTS MAZAK QUICK TURN NEXUS 300 CAN PRODUCE
| Part Type | Typical Operations |
|---|---|
| Shafts | OD Turning, Facing, Grooving |
| Drive Shafts | Turning, Threading |
| Hydraulic Cylinders | OD Turning, Boring |
| Pistons | Turning, Grooving |
| Bushings | OD / ID Turning |
| Sleeves | Turning, Boring |
| Flanges | Facing, OD / ID Turning |
| Hubs | Turning, Boring |
| Rollers | OD Turning, Facing |
| Bearing Housings | Turning, Boring |
| Valve Components | Turning, Threading |
| Pump Components | Turning, Boring |
| Compressor Components | Turning |
| Gear Blanks | OD Turning |
| Spacers | Turning, Facing |
| Pins | Turning, Grooving |
| Fittings | Turning, Threading |
| Machine Tool Components | Precision Turning |
| Industrial Components | Turning, Facing, Boring |
| Custom Job-Shop Parts | Configuration Dependent |
WHY CHOOSE MAZAK QUICK TURN NEXUS 300
The first major advantage of the QTN 300 is its large turning capacity. With maximum turning diameters around 16.5 inches and long-bed configurations approaching 48 inches of machining length, the machine can accommodate workpieces beyond the practical range of many smaller CNC lathes.
The 35 HP spindle provides substantial cutting power for a machine of this class. This allows the QTN 300 to perform aggressive roughing operations while retaining the spindle speed necessary for finishing and general production work.
The A2-8 spindle nose and approximately 3.46-inch spindle bore provide useful workholding and bar-stock capacity. A documented machine has approximately 3 inches of standard bar capacity, while other listings identify approximately 3.5 inches.
The 12-station automatic turret is another important production feature. Multiple tools can remain installed simultaneously, reducing setup time and allowing turning, boring, threading, grooving, and finishing operations to be performed in one cycle.
The MAZATROL 640T NEXUS control gives the machine a production-oriented CNC platform with conversational programming and, on appropriately equipped machines, EIA/ISO capability and modern communication options for its generation.
The QTN 300 can also be equipped with a programmable tailstock and automatic tool eye, both of which can reduce setup time and improve production consistency.
The machine’s chip conveyor and coolant system make it better suited to continuous production than a basic CNC lathe without automated chip handling. A documented machine uses a 118 PSI, 16 GPM coolant system.
Finally, the QTN 300 provides a strong balance between machine complexity and capability. Shops that primarily need turning operations can obtain substantial spindle power and work envelope without paying for the additional complexity of a Y-axis, second spindle, or full mill-turn platform.
WHY BUY USED MAZAK QUICK TURN NEXUS 300
A used QTN 300 can provide manufacturers with substantial CNC turning capacity at a potentially lower acquisition cost than a comparable new machine.
The machine’s 35 HP spindle, large chuck options, 3-inch-plus bar capacity, and long machining length make it suitable for work that may be too demanding for smaller used CNC lathes.
A used QTN 300 can also be attractive because many machines already include production accessories such as hydraulic chucks, tailstocks, automatic tool setters, chip conveyors, coolant systems, and tooling.
For example, a documented 2005 machine includes a 10-inch chuck, hydraulic tailstock, tool presetter, chip conveyor, coolant system, Ethernet, EIA/ISO option, and MAZATROL 640T NEXUS control.
The machine is also suitable for shops that need long turning capacity. A 48-inch cutting-length configuration can handle substantially longer components than compact production turning centers.
The QTN 300’s 2-axis architecture can be beneficial when the shop does not need milling or Y-axis operations. Operators can focus on conventional CNC turning processes without the additional programming and maintenance requirements associated with a full mill-turn machine.
However, the age and operating history of a used QTN 300 should be considered carefully. Buyers should inspect the spindle, ball screws, guideways, turret, tailstock, chuck, hydraulic system, CNC control, coolant system, and chip conveyor before purchase.
Spindle condition is particularly important. A machine with a worn spindle bearing or damaged spindle taper can require a significant repair investment.
Axis geometry should also be checked. A machine that has spent many years turning heavy components may show wear in the guideways or ball screws, particularly in frequently used portions of the travel.
The buyer should also verify that all included accessories actually operate correctly. Tool eye, tailstock, turret indexing, chuck clamping, chip conveyor, coolant pump, hydraulic system, and CNC functions should be tested under power before completing a purchase whenever possible.
HOW MUCH DOES A USED MAZAK QUICK TURN NEXUS 300 COST?
The price of a used MAZAK QUICK TURN NEXUS 300 varies substantially depending on year, spindle condition, machining hours, chuck size, bed length, control, turret, tailstock, tooling, chip conveyor, coolant equipment, and overall condition.
Current and recent used listings demonstrate this configuration variability. A documented 2005 QTN 300 is listed with 8,450 cutting hours, 48-inch cutting length, 10-inch chuck, tailstock, tool presetter, chip conveyor, and MAZATROL 640T NEXUS control.
A separate 2005 machine is documented with a 12-inch chuck, 48.23-inch machining length, 35 HP spindle, 4,000 RPM spindle speed, 12-tool turret, and MAZATROL PC-Fusion 640T control.
A 2004 QTN 300 listing demonstrates another configuration, with a 12-inch chuck, approximately 3.5-inch bar capacity, 30 HP power rating, and manual 4-jaw chuck.
| Used Machine Pricing Factor | Effect on Value |
|---|---|
| Machine Year | Major valuation factor |
| Cutting Hours | Important |
| Spindle Condition | Major valuation factor |
| Axis Condition | Major valuation factor |
| Maximum Machining Length | Important |
| Chuck Size | Important |
| Bar Capacity | Important |
| Spindle Motor | Major capacity factor |
| Spindle Speed | Important |
| Turret Condition | Major valuation factor |
| Tailstock | Adds capability |
| Programmable Tailstock | Adds production value |
| Automatic Tool Eye | Adds setup efficiency |
| Chip Conveyor | Adds production value |
| Coolant System | Important |
| CNC Control | Important |
| Tooling | Can reduce startup cost |
| Maintenance History | Important |
| Machine Accuracy | Major valuation factor |
| Asking Price | Must be verified for individual machine |
| Actual Sale Price | May differ from asking price |
Because QTN 300 machines are offered in substantially different configurations, there is no single used-market price that accurately represents every machine.
A shorter-bed QTN 300 with basic workholding should not be valued the same as a long-bed machine with a 35 HP spindle, 12-inch chuck, programmable tailstock, automatic tool eye, chip conveyor, tooling, and documented maintenance history.
For buyers, the best way to evaluate a used QTN 300 is to compare the complete machine configuration, operating hours, physical condition, included accessories, and demonstrated machining accuracy rather than relying on the model name alone.
A properly maintained MAZAK QUICK TURN NEXUS 300 remains a capable production CNC lathe for manufacturers requiring a combination of large turning capacity, strong spindle power, long machining length, automatic tooling, and MAZATROL CNC control. Its configuration makes it particularly useful for automotive, industrial machinery, hydraulic, oil and gas, heavy equipment, aerospace, and general job-shop applications.
