USED MAZAK NEXUS VCN 510C/40-II – 2008- CNC Machine For Sale - USA
MAZAK NEXUS VCN 510C/40-II – 2008

MAZAK NEXUS VCN 510C/40-II – 2008

MAKE: MAZAK
MODEL: NEXUS VCN 510C/40-II
TYPE: Vertical Machine
YEAR: 2008
SKU: 112068
DEALER: CNCsurplus
COUNTRY: USA

USED MAZAK NEXUS VCN 510C/40-II – 2008

The MAZAK NEXUS VCN 510C/40-II – 2008 is a 3-axis CNC vertical machining center designed for precision milling, drilling, tapping, boring, contouring, and general production machining. It combines a large working envelope with a 40-taper spindle, high spindle speed, automatic tool changing, and Mazak’s Mazatrol Matrix Nexus CNC control. The VCN 510C-II is particularly suitable for manufacturers that need more table capacity and travel than a compact VMC while maintaining a practical production-oriented machine configuration.

The documented 2008 VCN 510C-II provides approximately 41.3 inches of X-axis travel, 20.1–20.8 inches of Y-axis travel, and 20.1–20.8 inches of Z-axis travel. The standard table is approximately 51.2 × 21.6 inches, with a maximum evenly distributed table load of approximately 2,640 lbs. Some individual machines have two-pallet configurations, allowing the operator to load one pallet while machining on the other.

The 2008 machine is commonly equipped with a CAT 40 spindle, 12,000 RPM maximum spindle speed, and approximately 25 HP spindle motor. A 30-tool side-mount automatic tool changer is documented on multiple 2008 machines, with tool-to-tool change time around 1.3 seconds. Through-spindle coolant, chip conveyors, automatic tool-length measurement, and Renishaw probing are available on documented configurations.

The MAZAK NEXUS VCN 510C/40-II – 2008 is well suited to aerospace, automotive, industrial equipment, tooling, mold and die, defense, energy, and general precision manufacturing. Its combination of approximately 41-inch X travel, 51-inch table length, 12,000 RPM spindle, and 30-tool ATC makes it capable of handling a wide variety of medium-sized production components while maintaining good access to tooling and workholding.

MAZAK NEXUS VCN 510C/40-II 2008 – AXIS

SpecificationValue
X Axis41.34″ (1,050 mm)
Y Axis20.08–20.87″ (510–530 mm)
Z Axis20.08″ (510 mm)
Number of Controlled Axes3
4th AxisConfiguration Dependent
Machine ConfigurationCNC Vertical Machining Center
Axis DriveCNC Servo Driven

MAZAK NEXUS VCN 510C/40-II 2008 – AXIS TRAVELS / WORK ENVELOPE

SpecificationValue
X Travel41.34″
Y Travel20.08″
Z Travel20.08″
Table Length51.18″
Table Width21.65″
Maximum Table Load2,640 lbs
Spindle Nose to Table – Minimum5.9″
Spindle Nose to Table – Maximum25.98″
Column Face to Spindle CenterApproximately 22.67″
X/Y/Z Rapid TraverseApproximately 1,417 IPM
Maximum Cutting FeedApproximately 787 IPM

The 41.34 × 20.08 × 20.08-inch travel envelope and 51.18 × 21.65-inch table provide a useful combination of workpiece capacity and machining range for production and job-shop applications.

MAZAK NEXUS VCN 510C/40-II 2008 – CAPACITY

SpecificationValue
Machine TypeCNC Vertical Machining Center
Number of Axes3
Table Size51.18″ × 21.65″
Table Load Capacity2,640 lbs
X Travel41.34″
Y Travel20.08″
Z Travel20.08″
Spindle TaperCAT 40
Spindle Speed12,000 RPM
Spindle Motor25 HP
Tool Capacity30 Tools
4th AxisConfiguration Dependent
Pallet ChangerConfiguration Dependent

MAZAK NEXUS VCN 510C/40-II 2008 – SPINDLE

SpecificationValue
Spindle TypeVertical
Spindle TaperCAT 40
Tool InterfaceCAT 40
Maximum Spindle Speed12,000 RPM
Spindle Motor25 HP
Spindle ConfigurationPrecision / High-Speed
Spindle Nose to Table5.9″–25.98″
Through-Spindle CoolantEquipped / Configuration Dependent
Spindle OrientationEquipped
Synchronized TappingConfiguration Dependent

The documented 2008 VCN 510C-II configuration uses a 25 HP, 12,000 RPM CAT 40 spindle. Some used machines have additional high-pressure through-spindle coolant and precision-spindle options.

MAZAK NEXUS VCN 510C/40-II 2008 – TOOL CHANGER

SpecificationValue
Tool Changer TypeSide-Mount Automatic Tool Changer
Tool Capacity30 Tools
Tool InterfaceCAT 40
Tool-to-Tool Change TimeApproximately 1.3 Seconds
Maximum Tool DiameterApproximately 3.15″
Maximum Tool LengthApproximately 13.78″
Maximum Tool WeightApproximately 13.78–17.64 lbs
Tool ManagementAutomatic

The 30-pocket side-mount ATC is a standard feature on documented 2008 VCN 510C-II machines. The exact maximum tool weight and dimensional limits can vary slightly by machine configuration.

MAZAK NEXUS VCN 510C/40-II 2008 – CONTROL SYSTEM

SpecificationValue
CNC ControlMazatrol Matrix Nexus
Control ManufacturerMazak
Control TypeCNC
Display12.1″ Color LCD – Documented Configuration
ProgrammingMazatrol / EIA G-Code
EIA ProgrammingEquipped / Configuration Dependent
USB InterfaceEquipped on Documented Machine
LANEquipped on Documented Machine
Synchronized TappingEquipped / Configuration Dependent
High-Speed MachiningConfiguration Dependent
Tool Length MeasurementEquipped / Configuration Dependent

The Mazatrol Matrix Nexus control is documented on multiple 2008 VCN 510C-II machines. Some individual machines may have different software packages and options, so the installed control configuration should be verified.

MAZAK NEXUS VCN 510C/40-II 2008 – COOLANT / CHIP MANAGEMENT

SpecificationValue
Coolant SystemFlood Coolant
Through-Spindle CoolantEquipped / Configuration Dependent
High-Pressure CoolantConfiguration Dependent
Chip ConveyorEquipped / Configuration Dependent
Coolant FiltrationConfiguration Dependent
Automatic LubricationEquipped
Coolant Temperature ControlConfiguration Dependent
Chip ManagementEnclosed Work Area

Documented 2008 machines are available with through-spindle coolant, chip conveyors, and high-pressure coolant systems. One documented configuration includes a 213 PSI through-spindle coolant system.

MAZAK NEXUS VCN 510C/40-II 2008 – POWER REQUIREMENTS

SpecificationValue
Electrical SupplyThree Phase
VoltageConfiguration Dependent
Documented Voltage208 VAC
Frequency60 Hz
Phase3 Phase
Full Load CurrentConfiguration Dependent
Air SupplyRequired
Connected LoadConfiguration Dependent

A documented 2008 VCN 510C-II is wired for 208 VAC, three-phase, 60 Hz power. Electrical requirements should be verified from the individual machine’s nameplate before installation.

MAZAK NEXUS VCN 510C/40-II 2008 – DIMENSIONS

SpecificationValue
LengthApproximately 152″
WidthApproximately 111″
HeightApproximately 112″
Machine WeightApproximately 14,645–15,000 lbs
Floor SpaceConfiguration Dependent
Pallet Changer FootprintLarger With 2-Pallet Configuration
RiggingHeavy Industrial Rigging Required

Documented 2008 examples range around 14,645–15,000 lbs, with dimensions around 152 × 111 × 112 inches depending on machine configuration and accessories.

MAZAK NEXUS VCN 510C/40-II 2008 – GENERAL INFORMATION

SpecificationValue
ManufacturerMazak
ModelNEXUS VCN 510C/40-II
Year2008
Machine TypeCNC Vertical Machining Center
Number of Axes3
CNC ControlMazatrol Matrix Nexus
X Travel41.34″
Y Travel20.08″
Z Travel20.08″
Table Size51.18″ × 21.65″
Table Load2,640 lbs
Spindle TaperCAT 40
Spindle Speed12,000 RPM
Spindle Motor25 HP
Tool Capacity30 Tools
Tool ChangerSide-Mount ATC
Through-Spindle CoolantConfiguration Dependent
Chip ConveyorConfiguration Dependent
4th AxisConfiguration Dependent
Pallet ChangerConfiguration Dependent

INDUSTRIES THAT USE MAZAK NEXUS VCN 510C/40-II 2008

The MAZAK NEXUS VCN 510C/40-II 2008 is suitable for a wide range of precision machining applications.

  • Aerospace
  • Automotive
  • Defense
  • Energy
  • Oil & Gas
  • Industrial Equipment
  • General Manufacturing
  • Tool & Die
  • Mold Manufacturing
  • Job Shops
  • Contract Manufacturing
  • Medical Equipment
  • Transportation
  • Precision Engineering

Its 41-inch X travel and large table make it particularly useful for brackets, housings, plates, fixtures, tooling, molds, and other medium-to-large components.

TYPICAL PARTS MAZAK NEXUS VCN 510C/40-II 2008 CAN PRODUCE

The MAZAK NEXUS VCN 510C/40-II 2008 can produce a broad range of precision-machined components.

  • Aerospace components
  • Automotive components
  • Machine housings
  • Fixture plates
  • Large brackets
  • Pump components
  • Valve components
  • Tooling components
  • Mold components
  • Die components
  • Industrial machinery parts
  • Aluminum components
  • Steel components
  • Production fixtures
  • Precision mechanical components

Typical operations include face milling, pocketing, contouring, drilling, tapping, boring, reaming, slotting, profiling, chamfering, thread milling, and 3-axis interpolation.

WHY CHOOSE MAZAK NEXUS VCN 510C/40-II 2008

The MAZAK NEXUS VCN 510C/40-II – 2008 provides a substantial machining envelope without moving into the size class of larger double-column machining centers. Its 41.34-inch X travel, 20.08-inch Y travel, and 20.08-inch Z travel provide useful capacity for medium and large components, while the 51.18 × 21.65-inch table provides ample room for fixtures and multiple workpieces.

The 25 HP, 12,000 RPM CAT 40 spindle provides a combination of cutting power and spindle speed suitable for both production milling and higher-speed machining. The 30-tool side-mount ATC also allows multiple tools to remain loaded for machining operations without frequent manual intervention.

Some 2008 machines are equipped with two-pallet changers, through-spindle coolant, Renishaw probing, automatic tool measurement, chip conveyors, and high-pressure coolant, giving buyers the opportunity to find a heavily equipped configuration.

WHY BUY USED MAZAK NEXUS VCN 510C/40-II 2008

A used MAZAK NEXUS VCN 510C/40-II 2008 can provide a large machining envelope and advanced CNC functionality at a substantially lower acquisition cost than a new production VMC.

Common valuable features and options to look for include:

  • 41.34″ X travel
  • 20.08″ Y travel
  • 20.08″ Z travel
  • 51.18″ × 21.65″ table
  • 2,640-lb table capacity
  • CAT 40 spindle
  • 12,000 RPM spindle
  • 25 HP spindle
  • 30-tool side-mount ATC
  • Mazatrol Matrix Nexus control
  • Through-spindle coolant
  • High-pressure coolant
  • Chip conveyor
  • Renishaw probe
  • Automatic tool-length measurement
  • 2-pallet changer
  • 4th-axis wiring
  • Rotary table
  • Synchronized tapping

Before purchasing a used VCN 510C-II, buyers should inspect spindle bearings, spindle taper, spindle runout, ballscrews, linear guides, axis backlash, servo motors, tool changer operation, pallet changer operation where equipped, Mazatrol control, probing system, coolant system, chip conveyor, lubrication system, and machine geometry.

The control and spindle condition are especially important on a 2008 machine. Buyers should verify power-on hours, cutting hours, maintenance records, spindle hours if available, alarm history, and the machine’s ability to demonstrate all axes and options under power.

HOW MUCH DOES A USED MAZAK NEXUS VCN 510C/40-II 2008 COST?

The used price of a MAZAK NEXUS VCN 510C/40-II 2008 varies significantly depending on spindle condition, hours, control configuration, pallet changer, probing, coolant options, tooling, and overall maintenance.

Current used-market references include a 2008 VCN 510C-II listed around $29,000 USD, while another 2008 example is shown around $19,500 USD. These listings demonstrate the range that can occur depending on configuration and condition.

A reasonable estimated market range for a used MAZAK NEXUS VCN 510C/40-II 2008 is approximately $18,000–$35,000 USD.

Machine Condition / ConfigurationEstimated Used Price
As-Is / Higher Hours$15,000–$20,000
Running / Basic Configuration$18,000–$25,000
Good Condition / Well Equipped$25,000–$30,000
Low Hours / Extensive Options$30,000–$35,000+

The final selling price should be based on spindle condition, spindle hours, axis accuracy, backlash, control condition, ATC operation, pallet changer operation, probing, coolant system, chip conveyor, tooling, maintenance history, and the ability to demonstrate the machine under power.

Related Products