The Mazak Multiplex W-300Y is a high-performance CNC turning center designed for mid- to high-volume production, featuring a twin-spindle, twin-turret configuration that enables simultaneous machining. As part of Mazak’s MULTIPLEX W series, it uses a symmetrical machine design where both spindles and turrets can operate independently or together, significantly reducing cycle times and increasing throughput. The machine is equipped with 10-inch chucks, a maximum machining diameter of approximately 430 mm, and a machining length of around 225 mm, making it suitable for medium-sized precision components.
A key advantage of the W-300Y is its Y-axis capability, which allows off-center milling, drilling, and contour machining. This enables complete “DONE-IN-ONE” machining, reducing the need for secondary operations and improving part accuracy. The automatic workpiece transfer system allows seamless transition between the main and sub-spindle, ensuring continuous two-step machining with high precision.
Equipped with Mazatrol SmoothG control, the machine supports both conversational programming and G-code. Automation options such as gantry loaders and unload systems enable continuous, unattended production. Overall, the Multiplex W-300Y is widely used in automotive, aerospace, and general engineering industries where efficiency, flexibility, and high productivity are essential.
Machine Type: Dual-spindle CNC turning center with Y-axis
Enables DONE-IN-ONE® machining
Symmetrical design for balanced operations
Automatic workpiece transfer between spindles
Reduces setups and improves accuracy
Ideal for high-efficiency production
INDUSTRIES THAT USE MAZAK MULTIPLEX W-300Y
Automotive
Aerospace
Medical device manufacturing
Electronics
Precision engineering
TYPICAL PARTS MAZAK MULTIPLEX W-300Y CAN PRODUCE
Complex shafts
Valve bodies
Hydraulic components
Automotive transmission parts
Precision milled and turned components
WHY CHOOSE MAZAK MULTIPLEX W-300Y
Y-axis capability for complex machining
Dual-spindle, dual-turret productivity
Simultaneous machining reduces cycle time
High accuracy with single setup
Supports turning, milling, and drilling
Ideal for medium-to-high volume production
WHY BUY USED MAZAK MULTIPLEX W-300Y
Buying a used Mazak Multiplex W-300Y is a strategic investment for manufacturers looking to achieve high productivity at a reduced capital cost. One of the biggest advantages is access to advanced twin-spindle, twin-turret technology with Y-axis capability without the expense of a new machine. Mazak machines are known for their durability and long service life, making them reliable even after years of operation when properly maintained.
A major benefit of the W-300Y is its ability to perform simultaneous machining on both spindles while also handling complex milling operations with the Y-axis. This combination dramatically reduces cycle times and improves overall efficiency. The automatic workpiece transfer system enables complete machining in a single setup, minimizing handling and improving accuracy.
Used machines are typically available immediately, helping manufacturers avoid long lead times. Many pre-owned units come equipped with automation systems such as gantry loaders, parts unloaders, and tool monitoring systems, adding significant value. Cutting time is one of the most important factors when evaluating a used machine; lower spindle hours generally indicate better condition, higher accuracy, and longer remaining service life. Overall, buying a used W-300Y allows manufacturers to scale production efficiently while controlling investment costs.
HOW MUCH DOES A USED MAZAK MULTIPLEX W-300YCOST?
The cost of a used Mazak Multiplex W-300Y depends on manufacturing year, condition, configuration, and especially cutting time. Machines built before 2000 typically range from $35,000 to $100,000. These older machines often have higher cutting hours and outdated control systems but can still be effective for basic production or after refurbishment.
Machines produced between 2000 and 2010 generally range from $100,000 to $220,000. These units offer a strong balance between affordability and performance, particularly if they have moderate cutting time and have been well maintained. Many include upgraded Mazatrol controls and Y-axis functionality, making them suitable for more complex machining applications.
More recent machines from 2010 to 2025 typically range from $220,000 to $420,000 or more, depending on configuration, included automation, and overall condition. Machines with low cutting time command premium pricing due to longer remaining service life and higher productivity potential.
Cutting time plays a crucial role in valuation. A newer machine with heavy usage may be less desirable than an older unit with low spindle hours. Buyers should carefully evaluate spindle hours, maintenance history, and included features to determine the true value of a used Multiplex W-300Y.
