USED MAZAK INTEGREX E 1060V/8 II 2008

The MAZAK INTEGREX E 1060V/8 II 2008 is a large-capacity, high-performance 5-axis multi-tasking CNC machining center designed to combine turning, milling, boring, drilling, and complex multi-face machining in a single setup. Developed by Yamazaki Mazak, the INTEGREX e-1060V/8 II represents the second generation of Mazak’s large vertical multi-tasking platform and was introduced as a machine capable of completing complex components that traditionally required multiple CNC machines.

This machine combines a large rotary table with a tilting milling spindle and turning capability. A documented 2008 MAZAK INTEGREX E1060V/8 has a 1,000 mm chuck, maximum swing of approximately 1,250 mm, 1,875 mm X-axis travel, 1,060 mm Y-axis travel, and 1,345 mm Z-axis travel. It is equipped with a Mazatrol Matrix CNC control, 37 kW milling spindle, 10,000 RPM live milling spindle, and 120-tool magazine.

The machine is particularly valuable for aerospace, energy, heavy equipment, oil and gas, power-generation, and large industrial components where multiple operations must be completed accurately in one setup.

MAZAK INTEGREX E 1060V/8 II 2008 – AXIS

Specification	Value
Machine Type	5-Axis Vertical Multi-Tasking Center
X Axis Travel	1,875 mm / 73.82″
Y Axis Travel	1,060 mm / 41.73″
Z Axis Travel	Approximately 1,345 mm / 52.95″
B Axis	150°
C Axis	360°
Simultaneous 5-Axis	Yes
Turning	Yes
Milling	Yes
Boring	Yes

The B-axis milling spindle can tilt through approximately 150°, allowing horizontal, vertical, angled, and multi-face machining. The C-axis provides extremely fine rotary positioning for complex machining.

MAZAK INTEGREX E 1060V/8 II 2008 – WORK ENVELOPE

Specification	Value
Chuck Diameter	1,000 mm / 39.37″
Maximum Swing	Approximately 1,250 mm / 49.21″
Maximum Workpiece Diameter	Approximately 1,250 mm / 49.21″
Maximum Workpiece Height	Approximately 1,250 mm / 49.21″
Pallet Load	Approximately 5,952 lbs / 2,700 kg
Pallet Configuration	Dual Pallet, Configuration Dependent

The very large work envelope makes the INTEGREX E 1060V/8 II suitable for components that would exceed the capacity of conventional vertical machining centers. A documented 2008 machine is listed with approximately 1,250 mm maximum workpiece diameter and height.

MAZAK INTEGREX E 1060V/8 II 2008 – MILLING SPINDLE

Specification	Value
Milling Spindle Speed	Up to 10,000 RPM
Milling Spindle Power	Approximately 50 HP / 37 kW
Spindle Taper	CAT 50
Spindle Type	Tilting Milling Spindle
B Axis	150°
Milling	Yes
High-Speed Machining	Yes

The second-generation E1060V/8 II was promoted with a 50 HP, 10,000 RPM milling spindle capable of tilting through 150°. This provides the ability to perform horizontal and vertical milling as well as angled boring and machining of multiple workpiece surfaces.

MAZAK INTEGREX E 1060V/8 II 2008 – TURNING SPINDLE

Specification	Value
Turning Capability	Yes
Chuck Diameter	Approximately 1,000 mm
Maximum Chuck Speed	Approximately 500 RPM
C Axis	Yes
Turning Operations	Yes
Face Turning	Yes
Boring	Yes
Threading	Configuration Dependent

The large turning spindle and rotary table allow the machine to perform heavy turning operations in addition to milling. This integration is one of the key advantages of the INTEGREX platform.

MAZAK INTEGREX E 1060V/8 II 2008 – B AND C AXES

Specification	Value
B Axis Range	Approximately 150°
B Axis Function	Milling Spindle Tilt
C Axis	360°
C Axis Minimum Positioning	Approximately 0.0001°
Simultaneous 5-Axis	Yes
Angled Machining	Yes
Multi-Face Machining	Yes

The C-axis positioning capability is extremely fine, while the B-axis provides the angular flexibility needed for complex five-axis work. The original second-generation E1060V/8 II was specifically marketed for multi-face and five-axis machining.

MAZAK INTEGREX E 1060V/8 II 2008 – TOOL CHANGER

Specification	Value
Tool Magazine	120 Tools
Tool Interface	CAT 50
Automatic Tool Changer	Yes
Tool Capacity	120
Turning Tools	Configuration Dependent
Milling Tools	Yes
Boring Tools	Yes
Tool Management	CNC Controlled

The 120-tool magazine gives this machine substantial capacity for complex multi-operation production. A large tool inventory is especially valuable when turning, milling, boring, drilling, and finishing operations are combined into one cycle.

MAZAK INTEGREX E 1060V/8 II 2008 – FEEDRATES

Specification	Value
X Rapid Traverse	Configuration Dependent
Y Rapid Traverse	Configuration Dependent
Z Rapid Traverse	Configuration Dependent
Maximum Feedrate	Up to approximately 42 m/min
B Axis	Configuration Dependent
C Axis	Configuration Dependent

Published specifications for the E1060V/8 II identify feedrates reaching approximately 42 m/min, although actual rapid traverse values should be confirmed against the specific 2008 machine’s build configuration.

MAZAK INTEGREX E 1060V/8 II 2008 – CONTROL SYSTEM

Specification	Details
CNC Control	MAZATROL Matrix
Control Type	Multi-Tasking CNC
5-Axis Control	Yes
Simultaneous 5-Axis	Yes
EIA/ISO Programming	Yes
Mazatrol Programming	Yes
Tool Management	Yes
3D Compensation	Configuration Dependent
Tilted Work Plane	Configuration Dependent
5-Axis Tool Compensation	Configuration Dependent

The E1060V/8 II introduced the MAZATROL Matrix CNC system as part of its second-generation architecture. Available programming options can include EIA/ISO, simultaneous five-axis movement, tilted work planes, and five-axis tool compensation.

MAZAK INTEGREX E 1060V/8 II 2008 – PALLET SYSTEM

Specification	Value
Pallet Configuration	Dual Pallet
Pallet Changer	Automatic
Pallet Load	Approximately 5,952 lbs
Pallet Diameter	Configuration Dependent
Automated Production	Yes
Lights-Out Capability	Configuration Dependent

The dual-pallet configuration can help manufacturers load and unload workpieces while another component is being machined, improving machine utilization in production environments.

MAZAK INTEGREX E 1060V/8 II 2008 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Yes
Through-Spindle Coolant	Configuration Dependent
Chip Conveyor	Yes / Configuration Dependent
Coolant Filtration	Configuration Dependent
High-Pressure Coolant	Option Dependent
Chip Management	Automatic

The coolant and chip-handling system should be inspected carefully on a used machine, particularly when the machine has been used for heavy turning or high-volume milling.

MAZAK INTEGREX E 1060V/8 II 2008 – GENERAL INFORMATION

Item	Details
Manufacturer	Mazak
Model	INTEGREX E 1060V/8 II
Year	2008
Machine Type	5-Axis Multi-Tasking CNC
X Travel	1,875 mm / 73.82″
Y Travel	1,060 mm / 41.73″
Z Travel	Approximately 1,345 mm / 52.95″
B Axis	150°
C Axis	360°
Chuck Diameter	1,000 mm / 39.37″
Maximum Swing	Approximately 1,250 mm / 49.21″
Milling Spindle	10,000 RPM
Milling Spindle Power	Approximately 50 HP / 37 kW
Spindle Taper	CAT 50
Tool Capacity	120
CNC Control	MAZATROL Matrix
Pallet System	Dual Pallet, Configuration Dependent
5-Axis Machining	Yes
Turning	Yes
Milling	Yes

The exact specifications of an individual 2008 machine should be verified against its serial number, machine plate, Mazak documentation, and installed options.

INDUSTRIES THAT USE MAZAK INTEGREX E 1060V/8 II 2008

The MAZAK INTEGREX E 1060V/8 II is well suited to:

• Aerospace
• Oil and gas
• Power generation
• Heavy equipment
• Energy
• Automotive
• Defense
• Mining
• Industrial machinery
• Large-scale precision manufacturing

Its large work envelope and multi-tasking capabilities make it particularly useful for complex and heavy components.

TYPICAL PARTS MAZAK INTEGREX E 1060V/8 II 2008 CAN PRODUCE

Typical components include:

• Aerospace structural components
• Turbine components
• Engine housings
• Large flanges
• Pump bodies
• Valve bodies
• Gear housings
• Energy components
• Heavy-equipment components
• Large precision castings
• Industrial machinery components

Typical operations include turning, facing, boring, milling, drilling, tapping, threading, contouring, angled machining, and simultaneous five-axis machining.

WHY CHOOSE MAZAK INTEGREX E 1060V/8 II 2008

The primary advantage of the MAZAK INTEGREX E 1060V/8 II is its ability to replace several conventional machines with one sophisticated multi-tasking platform.

A complex component may traditionally require a large CNC lathe, vertical machining center, horizontal machining center, and multiple setups. The INTEGREX combines turning and milling with five-axis positioning, allowing many of these operations to be completed without removing the workpiece.

The machine’s large 1,000 mm chuck, approximately 1,250 mm workpiece capacity, CAT 50 milling spindle, 10,000 RPM spindle, 120-tool magazine, and 5-axis capability make it particularly suited to large, complicated components.

This can reduce setup time, improve part-to-part consistency, and minimize errors caused by moving a large component between separate machines.

WHY BUY USED MAZAK INTEGREX E 1060V/8 II 2008

Buying a used MAZAK INTEGREX E 1060V/8 II 2008 can provide manufacturers with access to advanced large-format multitasking technology at a fraction of the cost of comparable new equipment.

The machine is particularly attractive to manufacturers that regularly produce components requiring both turning and milling. Completing multiple processes in a single setup can reduce labor, handling, work-in-process inventory, and setup time.

The 120-tool capacity also makes it practical for complex jobs involving numerous tools and machining operations. The large CAT 50 milling spindle provides the rigidity needed for substantial cutting work, while the tilting B-axis makes it possible to reach multiple faces and angles.

Because this is a 2008 machine, buyers should carefully inspect the milling spindle, turning spindle, B-axis, C-axis, ballscrews, linear guides, pallet changer, tool changer, Mazatrol Matrix control, chuck, hydraulic systems, coolant system, and machine geometry.

A full five-axis test cut and rotary-axis accuracy test should be performed before purchase whenever possible.

HOW MUCH DOES A USED MAZAK INTEGREX E 1060V/8 II 2008 COST?

The price of a used MAZAK INTEGREX E 1060V/8 II 2008 varies substantially according to spindle hours, cutting hours, machine condition, control configuration, tooling, pallet system, chuck, coolant system, chip conveyor, probing, maintenance history, and location.

For used-equipment listing purposes, a reasonable broad estimate for a MAZAK INTEGREX E 1060V/8 II 2008 is approximately $150,000 to $300,000 USD, depending heavily on condition and configuration.

Large-format 5-axis multitasking machines can retain considerable value because of their specialized capabilities and replacement cost. A machine with a healthy 10,000 RPM milling spindle, accurate B/C axes, working dual-pallet system, 120-tool magazine, Mazatrol Matrix control, good chuck, and documented maintenance can command a premium.

Machines requiring major spindle rebuilding, rotary-axis repairs, control work, pallet-changer repairs, or significant geometric correction can be worth considerably less.

Before determining the final value, buyers should verify spindle condition, B-axis and C-axis accuracy, rotary-axis backlash, chuck operation, pallet changer, tool changer, axis positioning, five-axis interpolation, control functionality, coolant delivery, chip removal, and overall machine geometry.