USED MAKINO SNC 64 A15

The MAKINO SNC 64 A15 is a high-speed 3-axis CNC vertical machining center designed primarily for precision graphite, electrode, mold, die, and high-speed milling applications. The machine is part of Makino’s SNC series, which was developed around high-speed machining technology and is particularly well suited to applications requiring accurate contouring and fine surface finishes.

The SNC 64 A15 provides approximately 23.6″ of X-axis travel, 15.7″ of Y-axis travel, and 15.7″ of Z-axis travel, with a table measuring approximately 29.5″ x 15.7″. Depending on the specific machine configuration, the spindle can operate at speeds ranging from approximately 15,000 RPM to 30,000 RPM. Used examples have been documented with both CAT 40 and HSK-A63F spindle configurations, so the exact spindle specification should be verified for the individual machine.

The SNC 64 A15 is especially valuable for graphite electrode machining and high-speed 3D contouring. Some configurations include graphite dust extraction, spindle cooling, tool probing, and dedicated dust collection systems.

A used SNC 64 A15 can be an economical way to add high-speed milling capability for mold and die shops, EDM electrode manufacturers, and precision machining operations.

---

MAKINO SNC 64 A15 – AXIS

Specification	Details
Machine Type	CNC Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	23.6″ / 600 mm
Y-Axis Travel	15.7″ / 400 mm
Z-Axis Travel	15.7″ / 400 mm
X/Y/Z Rapid Traverse	Up to 630 IPM / 16,000 mm/min
4th Axis	Optional / Configuration Dependent
Linear Guides	Preloaded Linear Guideways
Servo Drives	AC Servo
3-Axis Contouring	Standard

---

MAKINO SNC 64 A15 – TABLE & WORK ENVELOPE

Specification	Details
Table Size	Approx. 29.5″ x 15.7″
Maximum Table Load	Approx. 550 lbs
Spindle Nose to Table	Approx. 9.8″ – 25.6″
Spindle Center to Column	Approx. 7.1″ – 22.8″
Table Configuration	Fixed / Moving Table
T-Slots	Standard
4th Axis	Configuration Dependent
Workholding	Vise / Fixture
Graphite Machining	Excellent
Mold & Die Machining	Excellent

Published examples confirm a table size of approximately 29.53″ x 15.75″ and maximum table capacity of approximately 550 lbs.

---

MAKINO SNC 64 A15 – SPINDLE

Specification	Details
Spindle Type	High-Speed Milling Spindle
Spindle Speed	15,000–30,000 RPM
Spindle Motor	Approx. 7.5–20 HP / Configuration Dependent
Spindle Taper	CAT 40 / HSK-A63F Configuration Dependent
Spindle Cooling	Available
Spindle Chiller	Available
Spindle Orientation	Standard
High-Speed Machining	Standard
3D Contouring	Supported
Graphite Machining	Optimized

Different SNC 64 A15 configurations have been documented with 15,000 RPM, 20,000 RPM, and 30,000 RPM spindles, so the actual spindle speed should be confirmed from the machine being listed.

---

MAKINO SNC 64 A15 – TOOL CHANGER

Specification	Details
Tool Changer Type	Automatic
Tool Capacity	15 Positions
Tool Taper	CAT 40 / HSK-A63F
Tool Selection	Automatic
Tool Breakage Monitoring	Configuration Dependent
Tool Probing	Available
Tool Presetter	Optional
Tool-Life Management	Available
Automatic Tool Change	Standard
Long Tool Capability	Supported

---

MAKINO SNC 64 A15 – CONTROL SYSTEM

Specification	Details
CNC Control	FANUC / Makino Professional A
Control Model	FANUC System 16iM / Configuration Dependent
Programming	EIA / G-Code
NURBS Interpolation	Available
High-Speed Contour Control	Super-GI
Look-Ahead	Available
Polar Coordinate Input	Available
Tool Offset Management	Standard
Work Offset Management	Standard
Diagnostics	Standard
Data Server / DNC	Available

Later SNC 64 A15 examples have been documented with FANUC System 16iM and Makino Professional A, including NURBS interpolation and Super-GI high-speed contour control.

---

MAKINO SNC 64 A15 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 630 IPM
Y-Axis Rapid Traverse	Approx. 630 IPM
Z-Axis Rapid Traverse	Approx. 630 IPM
Maximum Cutting Feedrate	Approx. 630 IPM
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes
3D Contouring	Supported
High-Speed Machining	Supported
Servo Compensation	Available

---

MAKINO SNC 64 A15 – COOLANT & DUST MANAGEMENT

Specification	Details
Flood Coolant	Configuration Dependent
Coolant Tank	Available
Coolant Pump	Available
Spindle Chiller	Available
Through-Spindle Coolant	Configuration Dependent
Graphite Dust Extraction	Available
Spindle Suction	Configuration Dependent
Tool Suction	Configuration Dependent
Dust Collection System	Available
Automatic Lubrication	Standard

Graphite dust extraction is an important feature on SNC machines configured specifically for electrode machining. Documented examples include air blast, spindle suction, tool suction, and automatic dust collection.

---

MAKINO SNC 64 A15 – PROBING & AUTOMATION

Specification	Details
Tool Probe	Available
Workpiece Probe	Available
Tool Breakage Detection	Available
Automatic Tool Measurement	Configuration Dependent
Dust Extraction	Available
Data Server	Available
Ethernet	Configuration Dependent
4th Axis	Optional
Automated Production	Supported
Lights-Out Production	Supported

---

MAKINO SNC 64 A15 – POWER REQUIREMENTS

Specification	Details
Spindle Motor	Approx. 7.5–20 HP
Electrical Service	Three-Phase
Input Voltage	Configuration Dependent
Frequency	50 / 60 Hz
Power Supply	Approx. 33.8 KVA on documented configuration
Shop Air	Required
Coolant System	Configuration Dependent
Dust Collection	Configuration Dependent
Spindle Cooling	Available
Electrical Cabinet	Makino

---

MAKINO SNC 64 A15 – DIMENSIONS

Specification	Details
Machine Width	Approx. 153″
Machine Depth	Approx. 92″
Machine Height	Approx. 99″
Machine Weight	Approx. 13,227 lbs
Floor Space	Approx. 153″ x 92″
Rigging	Required
Installation	Industrial
Dust Collector	Adds Floor Space
Chip / Dust System	Configuration Dependent

A documented SNC 64 A15 listing gives dimensions of approximately 92″ x 153″ x 99″ and a machine weight of approximately 13,227 lbs.

---

MAKINO SNC 64 A15 – GENERAL INFORMATION

Specification	Details
Manufacturer	Makino
Model	SNC 64 A15
Machine Category	CNC Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	23.6″ / 600 mm
Y-Axis Travel	15.7″ / 400 mm
Z-Axis Travel	15.7″ / 400 mm
Table Size	Approx. 29.5″ x 15.7″
Table Capacity	Approx. 550 lbs
Spindle Speed	15,000–30,000 RPM
Tool Capacity	15
Spindle Taper	CAT 40 / HSK-A63F
CNC Control	FANUC / Makino Professional A
Primary Applications	Graphite, Electrodes, Mold & Die

---

INDUSTRIES THAT USE MAKINO SNC 64 A15

The MAKINO SNC 64 A15 is particularly suitable for:

• Mold & Die
• EDM Electrode Manufacturing
• Aerospace
• Automotive
• Medical
• Precision Engineering
• Tool & Die
• Electronics
• Industrial Components
• Contract Machining
• Prototype Manufacturing

---

TYPICAL PARTS MAKINO SNC 64 A15 CAN PRODUCE

Typical applications include:

• Graphite electrodes
• Copper electrodes
• Mold inserts
• Die components
• Hardened steel components
• Precision molds
• Complex 3D surfaces
• Aerospace components
• Automotive tooling
• Prototype components

Typical operations include high-speed milling, 3D contouring, pocketing, profiling, drilling, engraving, electrode machining, and precision surface finishing.

---

WHY CHOOSE MAKINO SNC 64 A15

The primary advantage of the MAKINO SNC 64 A15 is its high-speed machining capability. Its relatively compact work envelope is optimized for precision components rather than very large workpieces.

The high-speed spindle and advanced contour-control technology make the machine particularly useful for producing complex 3D geometry and fine surface finishes. This is especially valuable in mold and die applications where electrode geometry and dimensional accuracy are critical.

The machine’s graphite-oriented configurations can also include dedicated dust extraction systems, helping manufacturers manage graphite dust during electrode production.

---

WHY BUY USED MAKINO SNC 64 A15

A used MAKINO SNC 64 A15 can be an economical solution for shops that need high-speed milling capability without the cost of a newer machining center.

When evaluating a used machine, inspect the high-speed spindle, spindle bearings, spindle chiller, linear guideways, ballscrews, tool changer, control, probing system, and dust collection system.

For graphite applications, the condition of the dust extraction equipment is especially important. Buyers should also verify spindle hours, spindle runout, axis backlash, positioning accuracy, tool-change operation, and machine geometry.

A machine equipped with high-speed spindle, graphite dust collection, spindle chiller, tool probe, work probe, data server, and complete tooling can provide significantly greater value.

---

HOW MUCH DOES A USED MAKINO SNC 64 A15 COST?

The value of a used MAKINO SNC 64 A15 depends heavily on the spindle speed, machine year, control configuration, spindle hours, condition, tooling, dust collection equipment, and included accessories.

USED MAKINO SNC 64 A15 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$18,000 – $25,000
Functional Production Machine	$25,000 – $32,000
Good Condition / Production Ready	$32,000 – $42,000
Excellent / Well Equipped	$42,000 – $52,000
Low Hours / Fully Equipped	$52,000 – $65,000+

For a Makino SNC 64 A15 in good working condition, a realistic market value is approximately $30,000–$45,000 USD.

For your inventory listing, I would recommend an asking-price range of $35,000–$50,000 USD for a clean machine with a high-speed spindle, FANUC/Makino Professional control, automatic tool changer, dust collection, spindle chiller, probing, and tooling.

Best estimated listing value: $35,000–$50,000 USD.