USED HAAS VR11 – 2022

The HAAS VR11 – 2022 is a large-format 5-axis CNC vertical machining center designed for machining oversized and complex components that may be difficult to process on conventional rotary-table or trunnion-style 5-axis machines. The VR11 uses a 2-axis gimbaled spindle head, allowing the cutting tool to rotate around the workpiece while the workpiece remains stationary on the large T-slot table. Haas specifies 120 inches of X-axis travel, 40 inches of Y-axis travel, and 42 inches of Z-axis travel, providing a substantial machining envelope for large components and fixtures.

The machine features a 20,000 RPM HSK-A63 integral spindle/motor, with Haas listing a maximum spindle rating of 29.0 hp / 21.6 kW on the current specification page. The spindle is liquid cooled and designed for high-speed machining of aluminum, composites, and other non-ferrous materials while also providing sufficient power for a range of steel machining applications.

The VR11’s dual-axis spindle head provides ±120° of B-axis tilt and ±245° of C-axis rotation, allowing the tool to approach complex surfaces and features from multiple directions. The machine supports both simultaneous 5-axis machining and rigid 3+2 machining, with pneumatic brakes on the rotary axes for increased rigidity during indexed operations.

The large table measures 120 x 28 inches, supports up to 4,000 lb evenly distributed, and includes five standard T-slots. The machine is equipped with a 50+1 side-mount tool changer, wireless intuitive probing, high-pressure flood coolant, chip auger, chip washdown, and a 95-gallon coolant tank.

---

HAAS VR11 2022 – AXIS

Specification	Details
Machine Configuration	5-Axis Vertical Machining Center
Spindle Head	2-Axis Gimbaled Head
X Axis	Linear
Y Axis	Linear
Z Axis	Linear
B Axis	±120° Tilt
C Axis	±245° Rotation
Simultaneous 5-Axis	Yes
3+2 Machining	Yes
CNC Control	Haas CNC Control
Spindle Taper	HSK-A63

The VR11 uses a gimbal-head architecture in which the B and C rotary axes are mounted on the spindle head. This allows the cutting tool to change orientation while the large workpiece remains stationary on the table.

---

HAAS VR11 2022 – AXIS TRAVELS / WORK ENVELOPE

Axis / SpecificationTravel	Details
X Axis Travel	120 in / 3,048 mm
Y Axis Travel	40 in / 1,016 mm
Z Axis Travel	42 in / 1,067 mm
B Axis Travel	±120°
C Axis Travel	±245°
B Axis Maximum Speed	112°/sec
C Axis Maximum Speed	208°/sec
Maximum Cutting Feed	360 ipm / 9.1 m/min

The 120-inch X-axis travel gives the VR11 a particularly large machining envelope. The gimbaled spindle head provides extensive angular access, allowing the machine to reach complex surfaces, undercuts, and multiple faces without requiring the workpiece to be repositioned.

---

HAAS VR11 2022 – CAPACITY

Specification	Details
Table Length	120 in / 3,048 mm
Table Width	28 in / 711 mm
Maximum Table Load	4,000 lb / 1,814 kg
Number of T-Slots	5
T-Slot Center Distance	4.92 in / 125 mm
T-Slot Width	0.626–0.630 in
X-Axis Travel	120 in
Y-Axis Travel	40 in
Z-Axis Travel	42 in

The large table allows oversized workpieces, fixtures, and aerospace structures to be supported directly on the machine table. Haas specifies a maximum evenly distributed table load of 4,000 lb.

---

HAAS VR11 2022 – SPINDLE

Specification Main Spindle	Details
Maximum Spindle Speed	20,000 RPM
Spindle Power	29.0 HP / 21.6 kW
Spindle Type	Integral Spindle/Motor
Spindle Taper	HSK-A63
Cooling	Liquid Cooled
Bearing Lubrication	Grease Packed
Maximum Torque	20 ft-lb / 27 Nm @ 7,500 RPM

The 20,000 RPM HSK-A63 spindle is designed for high-speed milling and provides the speed required for small tools and high surface footage. Haas describes the spindle as suitable for aluminum, composites, non-ferrous materials, and a range of steel applications.

---

HAAS VR11 2022 – MILLING SPINDLE

Specification	Details
Spindle Speed	20,000 RPM
Spindle Power	29.0 HP / 21.6 kW
Spindle Taper	HSK-A63
Spindle Configuration	Integral Spindle/Motor
Spindle Head	2-Axis Gimbaled
B-Axis Tilt	±120°
C-Axis Rotation	±245°
Simultaneous 5-Axis	Yes
3+2 Machining	Yes

The gimbaled spindle head is one of the primary features of the VR11. Instead of rotating the workpiece on a traditional rotary table, the spindle head changes orientation around the stationary component. This configuration provides access to multiple surfaces and complex geometries over the machine’s large work envelope.

---

HAAS VR11 2022 – TOOL CHANGER

Specification	Details
Tool Changer Type	Side-Mount Tool Changer
Tool Capacity	50+1
Spindle Taper	HSK-A63
Maximum Tool Diameter	2.5 in / 64 mm
Large Tool Diameter	5.0 in / 127 mm
Maximum Tool Length	12 in / 305 mm
Maximum Tool Weight	12 lb / 5.4 kg
Tool-to-Tool Time	2.80 sec average
Chip-to-Chip Time	3.60 sec average

The 50+1 tool changer provides substantial tool capacity for large and complex machining programs. Haas lists a 2.5-inch maximum tool diameter with all adjacent pockets occupied, while tools up to 5 inches can be accommodated when the adjacent pocket is empty.

---

HAAS VR11 2022 – CONTROL SYSTEM

Specification	Details
CNC Control	Haas CNC Control
Control Display	Widescreen Monitor
Program Memory	1 GB Standard
Tool Center Point	Included
Dynamic Work Offsets	Included
Rigid Tapping	Included
Advanced Tool Management	Included
Ethernet Interface	Yes
Wi-Fi Connection	Yes
HaasConnect	Yes
HaasDrop	Yes
Remote Jog Handle	Touchscreen Display

The Haas control is configured for the VR11’s 5-axis architecture and includes Tool Center Point Control, Dynamic Work Offsets, rigid tapping, advanced tool management, Ethernet, Wi-Fi, and HaasConnect.

---

HAAS VR11 2022 – COOLANT / CHIP MANAGEMENT

Specification	Details
Coolant Capacity	95 gal / 360 L
Coolant System	High-Pressure Flood
Chip Removal	Chip Auger
Chip Washdown	Yes
Chip Tray Filter Kit	Yes
Coolant Pump	Single-Stage
Window Air Blast	Yes
Coolant Management	Integrated

The VR11 includes a 95-gallon coolant tank, high-pressure flood coolant, chip auger, chip washdown, window air blast, and chip-tray filtration. These systems help manage chips and coolant during extended machining operations.

---

HAAS VR11 2022 – POWER REQUIREMENTS

Specification	Details
Spindle Power	29.0 HP / 21.6 kW
Spindle Speed	20,000 RPM
Low Input Voltage	220 VAC, 3 Phase
Low Voltage Full Load	70 A
High Input Voltage	440 VAC, 3 Phase
High Voltage Full Load	35 A
Minimum Air Pressure	80 psi / 5.5 bar
Air Requirement	4 SCFM @ 100 psi

The standard specifications identify 220 VAC or 440 VAC three-phase input configurations, with full-load current of 70 A at 220 V or 35 A at 440 V. Actual electrical requirements should be confirmed from the individual machine’s documentation and configuration before installation.

---

HAAS VR11 2022 – DIMENSIONS

Specification	Details
Shipping Length	288 in / 732 cm
Domestic Shipping Width	121 in / 307 cm
Domestic Shipping Height	142 in / 361 cm
Export Crate Width	123 in / 312 cm
Export Crate Height	144 in / 366 cm
Shipping Weight	Approximately 33,400 lb / 15,150 kg

The VR11 is a very large machine and requires substantial floor space and material-handling capability for installation. Haas lists a shipping weight of approximately 33,400 lb and shipping dimensions of approximately 288 x 121 x 142 inches for the domestic pallet configuration.

---

HAAS VR11 2022 – GENERAL INFORMATION

Specification	Details
Manufacturer	HAAS
Model	VR11
Year	2022
Machine Type	5-Axis Vertical Machining Center
Configuration	Large-Format 5-Axis
Spindle Head	2-Axis Gimbaled
CNC Control	Haas CNC Control
Spindle Taper	HSK-A63
Spindle Speed	20,000 RPM
Spindle Power	29.0 HP / 21.6 kW
X-Axis Travel	120 in / 3,048 mm
Y-Axis Travel	40 in / 1,016 mm
Z-Axis Travel	42 in / 1,067 mm
B-Axis	±120°
C-Axis	±245°
Tool Capacity	50+1
Table Size	120 x 28 in
Maximum Table Load	4,000 lb / 1,814 kg
Coolant Capacity	95 gal / 360 L
Simultaneous 5-Axis	Yes

The VR11 combines a very large linear work envelope with a dual-axis gimbaled spindle head, making it different from conventional 5-axis machines that rotate the workpiece on a trunnion or rotary table.

---

INDUSTRIES THAT USE HAAS VR11

The HAAS VR11 is designed for industries that require large-format machining combined with multi-axis access to complex surfaces. Its 120-inch X-axis travel and gimbaled spindle configuration make it suitable for large components that may exceed the practical capacity of smaller 5-axis machining centers.

Common industries and applications include:

• Aerospace manufacturing
• Aircraft component manufacturing
• Defense manufacturing
• Automotive manufacturing
• Energy equipment
• Large industrial machinery
• Transportation equipment
• Mold and die manufacturing
• Composite component manufacturing
• General precision engineering

The VR11’s ability to maintain the workpiece on a large stationary table while the spindle head changes orientation can be useful for large structural components and complex parts requiring multiple machining angles.

---

TYPICAL PARTS HAAS VR11 CAN PRODUCE

The VR11 can be used to manufacture and finish large components requiring multiple machining orientations, including:

• Aerospace structural components
• Aircraft frames and structural parts
• Large aluminum components
• Composite molds and tooling
• Large dies
• Automotive tooling
• Defense components
• Large industrial housings
• Energy-sector components
• Large precision fixtures
• Complex 5-axis components
• Large contoured components

The 2-axis gimbaled spindle allows the cutting tool to access multiple faces and complex contours without repeatedly repositioning a large workpiece. The ±120° B-axis and ±245° C-axis provide extensive angular access for complex 5-axis machining.

---

WHY CHOOSE HAAS VR11

The HAAS VR11 combines a large machining envelope with a 2-axis gimbaled spindle head, making it capable of machining large components that may not fit conveniently on traditional rotary-table 5-axis machines. Its 120 x 40 x 42-inch X/Y/Z travels provide substantial capacity for large workpieces and fixtures.

The 20,000 RPM HSK-A63 spindle provides high-speed machining capability, while the 50+1 tool changer allows complex programs to use a broad range of cutting tools. The B-axis provides ±120° of tilt and the C-axis provides ±245° of rotation, giving the spindle access to numerous machining angles.

The machine also includes Tool Center Point Control, Dynamic Work Offsets, wireless probing, high-pressure coolant, chip auger, and a 95-gallon coolant system as standard features on the documented configuration.

---

WHY BUY USED HAAS VR11

Buying a used HAAS VR11 can provide access to large-format 5-axis machining capability without the capital expenditure associated with purchasing a new machine. For manufacturers that regularly machine oversized components, the combination of the large table, long X-axis travel, and gimbaled spindle head can provide substantial production flexibility.

A properly inspected used VR11 may include valuable features such as:

• Haas CNC control
• 20,000 RPM HSK-A63 spindle
• 2-axis gimbaled spindle head
• ±120° B-axis
• ±245° C-axis
• Simultaneous 5-axis machining
• 50+1 tool changer
• Wireless intuitive probing
• Tool Center Point Control
• Dynamic Work Offsets
• High-pressure flood coolant
• Chip auger
• Chip washdown
• 95-gallon coolant tank
• Large 120 x 28-inch T-slot table

Before purchasing, buyers should inspect spindle condition, spindle taper, B- and C-axis operation, rotary-axis brakes, linear-axis movement, backlash, machine geometry, tool changer operation, probing system, coolant system, chip auger, control operation, and overall machine condition. The exact options and condition can vary between individual used machines.

---

HOW MUCH DOES A USED HAAS VR11 COST?

The price of a used HAAS VR11 can vary significantly depending on year, machine condition, spindle hours, options, tooling, maintenance history, installation requirements, and seller location. Unlike smaller Haas vertical machining centers, the VR11 represents a large-format 5-axis machine, so transportation, rigging, installation, and facility preparation can also have a significant effect on the total acquisition cost.

For context, a July 2022 Haas factory quotation for a VR11 showed a base price of US$422,295, with control options, additional options, and accessories bringing the quoted total to US$456,365. This was a new-machine quotation rather than a used-market sale price, so it should not be treated as the current used value.

When evaluating a used HAAS VR11, buyers should compare the machine’s year, spindle hours, B- and C-axis condition, spindle condition, tool changer, probing system, coolant and chip-management equipment, included options, service history, tooling, and overall machine condition. The individual configuration can have a substantial effect on the final asking price.