HAAS VF3/40 – 2013

MAKE: HAAS

MODEL: VF3/40

TYPE: Vertical Machine

YEAR: 2013

SKU: 112083

DEALER: Tyvan Machinery Sales

COUNTRY: USA

USED HAAS VF3/40 – 2013

The HAAS VF3/40 2013 is a versatile CNC Vertical Machining Center designed for milling, drilling, boring, tapping, pocketing, contouring, profiling, and general precision production machining. The VF-3/40 is one of the most widely used Haas vertical machining centers and provides a substantial working envelope while maintaining the practical CAT40 tooling configuration and relatively compact footprint that make the VF Series popular in job shops and production environments.

The 2013 HAAS VF3/40 provides approximately 40″ (1,016 mm) of X-axis travel, 20″ (508 mm) of Y-axis travel, and 25″ (635 mm) of Z-axis travel. Its approximately 48″ × 18″ (1,219 × 457 mm) worktable supports a maximum evenly distributed load of approximately 3,500 lbs (1,588 kg). A documented 2013 configuration is equipped with an 8,100 RPM CAT40 spindle, approximately 20 HP spindle motor, and 24-position automatic tool changer.

The VF3/40 is also commonly equipped with Haas CNC control, rigid tapping, automatic tool measurement, fourth-axis drive and wiring, probing, chip auger, coolant system, remote jog handle, and USB/data-transfer capability, depending on the individual machine. X, Y, and Z rapid traverse rates on documented 2013 configurations can reach approximately 1,000 IPM (25.4 m/min), providing efficient positioning during production cycles.

The HAAS VF3/40 2013 is an excellent choice for manufacturers producing aerospace components, automotive parts, industrial machinery components, fixtures, molds, dies, hydraulic components, large brackets, housings, and other precision-machined workpieces requiring a substantial vertical machining envelope.

HAAS VF3/40 2013 – AXIS

Specification	Value
X Axis	1,016 mm (40″)
Y Axis	508 mm (20″)
Z Axis	635 mm (25″)
Machine Configuration	CNC Vertical Machining Center
Axis Configuration	3-Axis
Fourth Axis	Configuration Dependent
Fifth Axis	Configuration Dependent
Guideway Configuration	CNC Vertical Mill

HAAS VF3/40 2013 – AXIS TRAVELS / WORK ENVELOPE

Specification	Value
X Axis Travel	40″ (1,016 mm)
Y Axis Travel	20″ (508 mm)
Z Axis Travel	25″ (635 mm)
Spindle Nose to Table – Maximum	Approximately 29.2″ (742 mm)
Spindle Nose to Table – Minimum	Approximately 4.2″ (107 mm)
Table Length	48″ (1,219 mm)
Table Width	18″ (457 mm)
T-Slot Width	Approximately 0.626–0.630″
T-Slot Center Distance	Approximately 3.15″
Number of Standard T-Slots	5
Maximum Table Load	3,500 lbs (1,588 kg)

HAAS VF3/40 2013 – CAPACITY

Specification	Value
Machine Type	CNC Vertical Machining Center
Table Size	48″ × 18″
Maximum Table Load	3,500 lbs
X-Axis Travel	40″
Y-Axis Travel	20″
Z-Axis Travel	25″
Spindle Taper	CAT40
Spindle Speed	8,100 RPM
Spindle Motor	Approximately 20 HP
Tool Capacity	24 Tools / Configuration Dependent
Number of Axes	3
Fourth Axis	Configuration Dependent
Rigid Tapping	Yes
Tool Probe	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent

HAAS VF3/40 2013 – SPINDLE

Specification	Value
Main Spindle Speed	8,100 RPM
Spindle Motor	Approximately 20 HP
Spindle Taper	CAT40
Spindle Configuration	Vertical
Spindle Drive	Direct Drive / Configuration Dependent
Maximum Torque	Approximately 90 ft-lb / Configuration Dependent
Spindle Orientation	Yes
Rigid Tapping	Yes
Through-Spindle Coolant	Configuration Dependent
Spindle Cooling	Configuration Dependent

The 8,100 RPM CAT40 spindle provides a useful balance between cutting power and higher-speed machining, making the VF3/40 suitable for aluminum, steel, stainless steel, plastics, and a wide range of engineering materials.

HAAS VF3/40 2013 – TOOL CHANGER

Specification	Value
Tool Capacity	24 Tools
Tool Changer	Automatic Tool Changer
Tool Interface	CAT40
Tool Changer Type	Carousel / Configuration Dependent
Maximum Tool Diameter	Configuration Dependent
Maximum Tool Weight	Approximately 12 lbs
Tool-to-Tool Time	Approximately 4.2 sec
Chip-to-Chip Time	Approximately 4.5 sec
Tool Management	Automatic

The 24-position automatic tool changer allows operators to keep drilling, roughing, finishing, boring, tapping, and other tools loaded during production programs.

HAAS VF3/40 2013 – CONTROL SYSTEM

Specification	Value
CNC Control	Haas CNC Control
Programming	ISO G-Code
Conversational Programming	Configuration Dependent
Tool Offset Management	Yes
Work Offset Management	Yes
Rigid Tapping	Yes
Automatic Tool Measurement	Configuration Dependent
Tool Probe	Configuration Dependent
Fourth-Axis Drive	Configuration Dependent
Remote Jog Handle	Configuration Dependent
Program Memory	Configuration Dependent
USB/Data Transfer	Configuration Dependent
Diagnostic Functions	Yes

The Haas control provides a straightforward operating environment for both job-shop and production machining applications.

HAAS VF3/40 2013 – FEEDRATES

Specification	Value
X Rapid Traverse	Approximately 1,000 IPM / 25.4 m/min
Y Rapid Traverse	Approximately 1,000 IPM / 25.4 m/min
Z Rapid Traverse	Approximately 1,000 IPM / 25.4 m/min
Maximum Cutting Feed	Approximately 500 IPM / 12.7 m/min
X Maximum Thrust	Approximately 2,550 lbf
Y Maximum Thrust	Approximately 2,550 lbf
Z Maximum Thrust	Approximately 4,200 lbf
Feedrate Override	Yes
Rapid Override	Yes

The rapid-traverse performance helps reduce positioning time during repeated drilling, pocketing, contouring, and multi-tool machining operations.

HAAS VF3/40 2013 – FOURTH AXIS / ROTARY CAPABILITY

Specification	Value
Fourth-Axis Drive	Configuration Dependent
Fourth-Axis Wiring	Configuration Dependent
Rotary Table	Optional
Indexing Machining	Yes, When Equipped
Continuous Rotary Machining	Configuration Dependent
Multi-Sided Machining	Yes
Simultaneous 4-Axis	Configuration Dependent
Rotary Probing	Configuration Dependent

A VF3/40 equipped with fourth-axis drive and wiring can be paired with a compatible Haas rotary unit for indexed or continuous rotary machining.

HAAS VF3/40 2013 – COOLANT / CHIP MANAGEMENT

Specification	Value
Flood Coolant	Standard
Coolant Tank	Approximately 55 Gallons
Coolant Pump	Standard
Multi-Stage Coolant Pump	Configuration Dependent
Chip Auger	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent
High-Pressure Coolant	Configuration Dependent
Window Air Blast	Configuration Dependent
Automatic Lubrication	Yes
Chip Washdown	Configuration Dependent

A chip auger and suitable coolant configuration can improve machine cleanliness and production efficiency during long machining cycles.

HAAS VF3/40 2013 – POWER REQUIREMENTS

Specification	Value
Electrical Supply	Three Phase
Voltage	208–240 VAC / Configuration Dependent
Frequency	50/60 Hz
Phase	3 Phase
Minimum Circuit Requirement	Approximately 30 A
Air Requirement	4 SCFM at 100 PSI
Minimum Air Pressure	Approximately 80 PSI
Connected Load	Configuration Dependent
Transformer	Configuration Dependent

HAAS VF3/40 2013 – DIMENSIONS

Specification	Value
Length	Approximately 118–152″
Width	Approximately 92–110″
Height	Approximately 101–119″
Machine Weight	Approximately 12,000–13,500 lbs
Floor Space	Configuration Dependent
Shipping Configuration	Configuration Dependent

The actual footprint and weight can vary according to the tool changer, chip conveyor, coolant system, transformer, probing equipment, and other installed accessories.

HAAS VF3/40 2013 – GENERAL INFORMATION

Item	Details
Manufacturer	Haas Automation
Model	VF3/40
Year	2013
Machine Type	CNC Vertical Machining Center
CNC Control	Haas CNC Control
X-Axis Travel	40″
Y-Axis Travel	20″
Z-Axis Travel	25″
Table Size	48″ × 18″
Maximum Table Load	3,500 lbs
Spindle Taper	CAT40
Spindle Speed	8,100 RPM
Spindle Motor	Approximately 20 HP
Tool Capacity	24 Tools / Configuration Dependent
Maximum Cutting Feed	Approximately 500 IPM
Rapid Traverse	Approximately 1,000 IPM
Rigid Tapping	Yes
Tool Probe	Configuration Dependent
Fourth Axis	Configuration Dependent
Chip Auger	Configuration Dependent
Through-Spindle Coolant	Configuration Dependent
Coolant Capacity	Approximately 55 Gallons

INDUSTRIES THAT USE HAAS VF3/40 2013

The HAAS VF3/40 2013 is well suited for industries requiring a large and flexible vertical machining envelope, including:

Aerospace
Automotive
Defense
Industrial machinery
Heavy equipment
Energy
Hydraulic and pneumatic
Mold and die
Fabrication
General precision manufacturing
Job shops
Contract manufacturing

Its 40″ X-axis travel, 20″ Y-axis travel, 25″ Z-axis travel, and 3,500 lb table capacity make it particularly useful for long components, large fixtures, housings, plates, brackets, molds, and multiple-part setups.

TYPICAL PARTS HAAS VF3/40 2013 CAN PRODUCE

The HAAS VF3/40 2013 can manufacture:

Aerospace components
Automotive components
Large brackets
Machine housings
Machine bases
Fixtures
Jigs
Hydraulic components
Pump components
Valve components
Mold components
Heavy equipment parts
Structural components
Precision-machined plates
Custom production components

The machine can perform face milling, pocketing, drilling, boring, tapping, reaming, contouring, profiling, slotting, chamfering, engraving, and other general-purpose CNC milling operations.

WHY CHOOSE HAAS VF3/40 2013

The HAAS VF3/40 2013 is an excellent choice for manufacturers looking for a proven CNC vertical machining center with substantial axis travel, a large worktable, and widely available CAT40 tooling.

Its combination of 40″ X-axis travel, 20″ Y-axis travel, 25″ Z-axis travel, and 3,500 lb table capacity gives manufacturers enough room for long components and large fixtures while still maintaining a practical machine size for many production environments.

The 8,100 RPM spindle and approximately 20 HP spindle motor provide useful cutting capability for both roughing and finishing operations. The 24-position automatic tool changer also provides enough tooling capacity for many multi-operation production programs.

The VF3/40 can also be expanded with options such as probing, fourth-axis capability, chip auger, rigid tapping, through-spindle coolant, and automatic tool measurement, making it adaptable to a wide variety of machining requirements.

WHY BUY USED HAAS VF3/40 2013

Purchasing a used HAAS VF3/40 2013 allows manufacturers to acquire a large-capacity CNC vertical machining center while reducing the capital investment compared with purchasing a new VMC.

Many used machines may include valuable options such as:

Haas CNC control
40″ X-axis travel
20″ Y-axis travel
25″ Z-axis travel
48″ × 18″ table
3,500 lb table capacity
CAT40 spindle
8,100 RPM spindle
Approximately 20 HP spindle motor
24-position automatic tool changer
Tool probe
Automatic tool measurement
Fourth-axis drive and wiring
Rigid tapping
Chip auger
Through-spindle coolant
Remote jog handle
55-gallon coolant tank
Ethernet
USB/data transfer
Complete CAT40 tooling

A documented 2013 machine can be found with 8,100 RPM CAT40 spindle, 40″ × 20″ × 25″ travels, 24-tool changer, tool probe, and fourth-axis preparation, while other machines from the same year may have different equipment and spindle configurations.

Before purchasing, buyers should inspect the spindle, spindle bearings, CAT40 taper, drawbar, X/Y/Z-axis movement, ballscrews, linear guides, tool changer, Haas control, probing system, coolant system, chip auger, lubrication system, electrical cabinet, and machine geometry.

Spindle hours, cutting hours, alarm history, previous crash history, maintenance records, tooling, fourth-axis equipment, and evidence of previous heavy cutting should also be reviewed.

HOW MUCH DOES A USED HAAS VF3/40 2013 COST?

The value of a used HAAS VF3/40 2013 depends heavily on spindle hours, machine condition, spindle motor configuration, tool changer, probing, fourth-axis equipment, coolant system, chip management, tooling package, and maintenance history.

A current used 2013 VF-3/40 listing is equipped with 40″ × 20″ × 25″ travels, 8,100 RPM spindle, 30 HP vector-drive spindle, 24+1 tool changer, Renishaw probing, fourth-axis drive, chip auger, rigid tapping, and other options, showing that well-equipped machines from this year can carry considerable value.

For used-equipment listing purposes, a used HAAS VF3/40 2013 can typically be expected to sell in the approximately $30,000 to $50,000 USD range, with the actual value depending heavily on condition, spindle hours, options, tooling, and location.

A low-hour machine with a healthy spindle, accurate X/Y/Z positioning, functioning automatic tool changer, probing, fourth-axis capability, chip auger, complete CAT40 tooling, and documented maintenance may command a premium. A machine requiring spindle, ballscrew, servo, tool-changer, control, or electrical repairs may sell for considerably less.

Products

Machine make

Model

Machine type