HAAS VF3 – 2013

MAKE: HAAS

MODEL: VF3

TYPE: Vertical Machine

YEAR: 2013

SKU: 111977

DEALER: KD Machinery

COUNTRY: USA

USED HAAS VF3 – 2013

The 2013 HAAS VF3 is a versatile 3-axis CNC vertical machining center designed for production machining, job-shop work, prototyping, and precision manufacturing. As one of the larger machines in the standard Haas VF medium series, the VF3 provides substantially more X-axis travel than the smaller VF1 and VF2 while retaining the straightforward operation and relatively compact footprint associated with Haas vertical machining centers.

The standard VF3 provides 40 inches of X-axis travel, 20 inches of Y-axis travel, and 25 inches of Z-axis travel. This gives the machine a working envelope of approximately 1,016 × 508 × 635 mm, making it suitable for a broad range of medium-sized components, fixtures, molds, dies, plates, and production parts.

A documented 2013 HAAS VF3 is equipped with an 8,100 RPM CAT40 spindle, 20 HP spindle motor, 24-position automatic tool changer, Haas CNC control, tool probe, and 4th-axis drive preparation. Other machines from the same production period may have different options, so the exact equipment package should always be confirmed for the individual machine.

The VF3 has a 48 × 18-inch table with a maximum evenly distributed table load of approximately 3,500 lb. This provides sufficient working area for many larger workpieces while leaving room for vises, fixtures, tombstones, or other workholding equipment.

The 40-taper spindle provides a useful balance between cutting capability and versatility. The documented 2013 configuration uses an 8,100 RPM spindle with approximately 20 HP, while current Haas VF3 specifications show that the platform can also be configured with different spindle options. For a used 2013 machine, the actual spindle specification should be verified from the machine itself.

The 24-tool automatic tool changer found on documented 2013 machines allows operators to keep a practical range of cutters loaded for multi-operation jobs. Depending on configuration, equipment such as probing, chip augers, through-tool coolant, rotary-axis preparation, rigid tapping, and other production options may also be present.

For manufacturers searching for a dependable used VMC with a substantial work envelope, the HAAS VF3 2013 offers a strong combination of 40-inch X travel, CAT40 tooling, high-speed spindle capability, automatic tool changing, Haas CNC control, and a large worktable.

HAAS VF3 – MACHINE CAPACITY

Specification	Value
Manufacturer	HAAS
Model	VF3
Year	2013
Machine Type	CNC Vertical Machining Center
Number of Axes	3
X-Axis Travel	40 in / 1,016 mm
Y-Axis Travel	20 in / 508 mm
Z-Axis Travel	25 in / 635 mm
Table Size	48 × 18 in / 1,219 × 457 mm
Maximum Table Load	3,500 lb / 1,588 kg
Spindle Taper	CAT40 / 40 Taper
Spindle Speed	8,100 RPM
Spindle Power	Approximately 20 HP on documented 2013 machine
Tool Changer	24 Station on documented 2013 machine
CNC Control	HAAS
Tool Probe	Configuration Dependent
4th Axis Preparation	Configuration Dependent

Documented 2013 VF3 machines confirm the 40 × 20 × 25-inch travels, 48 × 18-inch table, CAT40 spindle, 8,100 RPM spindle, and 24-tool ATC.

HAAS VF3 – AXIS TRAVEL

Axis	Travel
X Axis	40 in / 1,016 mm
Y Axis	20 in / 508 mm
Z Axis	25 in / 635 mm
Spindle Nose to Table – Maximum	Approximately 29.2 in / 742 mm
Spindle Nose to Table – Minimum	Approximately 4.2 in / 107 mm
X Rapid	Approximately 1,000 IPM
Y Rapid	Approximately 1,000 IPM
Z Rapid	Approximately 1,000 IPM
Number of Standard Axes	3

The 40 × 20 × 25-inch travel configuration is the defining work-envelope specification of the standard VF3.

HAAS VF3 – WORKTABLE

Specification	Value
Table Length	48 in / 1,219 mm
Table Width	18 in / 457 mm
Table Load Capacity	3,500 lb / 1,588 kg
T-Slots	5
T-Slot Center Distance	Approximately 3.15 in / 80 mm
T-Slot Width	Approximately 0.626–0.630 in
Workholding	Vises / Fixtures / Rotary Equipment
4th-Axis Compatibility	Available

The VF3’s large table gives operators substantial room for fixtures and larger workpieces while maintaining access to the full X-Y machining envelope.

HAAS VF3 – SPINDLE

Specification	Value
Spindle Type	Vertical CNC Milling Spindle
Taper	CAT40
Maximum Speed	8,100 RPM
Spindle Power	Approximately 20 HP on documented 2013 machine
Spindle Drive	Direct Drive / Configuration Dependent
Maximum Torque	Approximately 90 ft-lb / 122 Nm
Spindle Orientation	Available
Tool Retention	Automatic
Coolant	Flood / Configuration Dependent

The documented 2013 VF3 uses an 8,100 RPM CAT40 spindle and 20 HP main motor. Haas’s VF3 platform specifications list an 8,100 RPM, 30 HP configuration on newer machines, illustrating why the exact spindle motor rating should be verified on a used 2013 machine rather than assumed from the current model.

HAAS VF3 – AUTOMATIC TOOL CHANGER

Specification	Value
Tool Changer Type	Automatic
Capacity	24 Tools on documented 2013 machine
Tool Taper	CAT40
Tool Change	Automatic
Tool Management	CNC Controlled
Maximum Tool Diameter	Configuration Dependent
Maximum Tool Weight	Configuration Dependent
Tool Presetter	Optional
Through-Spindle Coolant	Optional

The 24-position ATC provides enough capacity for many production and job-shop applications, allowing roughing, finishing, drilling, tapping, boring, chamfering, and other tools to remain loaded during a job.

HAAS VF3 – CNC CONTROL

Feature	Description
CNC Control	HAAS
Machine Type	3-Axis VMC
G-Code Programming	Yes
Tool Offsets	Yes
Work Offsets	Yes
Rigid Tapping	Available
Tool Management	Supported
Diagnostic Functions	Integrated
Program Memory	Configuration Dependent
Ethernet	Configuration Dependent
USB	Configuration Dependent
Probing	Configuration Dependent
4th-Axis Control	Configuration Dependent

The HAAS control is designed around relatively straightforward CNC programming and operation, making the VF3 suitable for both production environments and job shops running a wide variety of components.

HAAS VF3 – COOLANT SYSTEM

Specification	Value
Coolant Capacity	Approximately 55 gal / 208 L
Coolant Pump	Multi-Stage
Flood Coolant	Yes
Chip Washdown	Available
High-Pressure Coolant	Optional
Through-Tool Coolant	Optional
Coolant Filtration	Configuration Dependent
Chip Auger	Optional

Haas lists a 55-gallon coolant capacity and multi-stage coolant pump for the VF3 platform, with chip-management and coolant options depending on configuration.

HAAS VF3 – 4TH-AXIS CAPABILITY

The HAAS VF3 can be configured for 4th-axis rotary machining, making it possible to machine multiple sides of suitable components without manually repositioning the workpiece.

A documented 2013 VF3 was equipped with a 4th-axis drive and was prepared for rotary machining.

Typical 4th-axis applications include:

Indexing
Radial drilling
Bolt-circle machining
Multiple-side milling
Contouring cylindrical components
Flange machining
Shaft features
Complex fixture work

The actual rotary table, drive, wiring, and software options should be verified on the specific used machine.

HAAS VF3 – TOOL PROBING

Feature	Availability
Tool Probe	Configuration Dependent
Automatic Tool Measurement	Available
Tool Length Measurement	Available
Work Probe	Configuration Dependent
Broken Tool Detection	Configuration Dependent
Automatic Offset Updating	Supported

Some documented 2013 VF3 machines include a tool probe for automatic tool measurement.

HAAS VF3 – AIR REQUIREMENTS

Specification	Value
Air Requirement	Approximately 4 SCFM at 100 PSI
Minimum Pressure	Approximately 80 PSI
Air Hose	3/8 in
Air Coupler	3/8 in
Pneumatic System	Integrated

Haas’s VF3 specifications list approximately 4 SCFM at 100 PSI, with a minimum pressure of 80 PSI.

HAAS VF3 – ELECTRICAL REQUIREMENTS

Specification	Value
Electrical Supply	3-Phase
Low Input Voltage	220 VAC
High Input Voltage	440 VAC / Option Dependent
Spindle Speed	8,100 RPM
Spindle Motor	Configuration Dependent
Transformer	Configuration Dependent
Power Requirement	Installation Specific

The exact electrical configuration should be confirmed from the machine’s electrical cabinet and serial-number documentation before installation.

HAAS VF3 – DIMENSIONS AND WEIGHT

Specification	Approximate Value
Machine Weight	Approximately 13,500 lb / 6,123 kg on documented 2013 listing
Width	Approximately 110 in
Height	Approximately 118–119.5 in
Length	Approximately 118 in
Floor Space	Large
Installation	Industrial Foundation / Level Floor

A documented 2013 VF3 lists approximately 13,500 lb and dimensions of approximately 118 × 110 × 118 inches. Actual dimensions and weight can vary with chip conveyors, tool changers, transformers, and other accessories.

HAAS VF3 – GENERAL INFORMATION

Specification	Value
Manufacturer	HAAS
Model	VF3
Year	2013
Machine Type	CNC Vertical Machining Center
Axes	3
X Travel	40 in
Y Travel	20 in
Z Travel	25 in
Table	48 × 18 in
Table Load	3,500 lb
Spindle Taper	CAT40
Spindle Speed	8,100 RPM
Spindle Power	Approximately 20 HP, documented 2013 configuration
Tool Changer	24 Station, documented 2013 configuration
Control	HAAS
4th Axis	Configuration Dependent
Tool Probe	Configuration Dependent
Chip Conveyor	Configuration Dependent
Coolant Capacity	Approximately 55 gal
Machine Weight	Approximately 13,500 lb

WHY BUY USED HAAS VF3 2013

A used HAAS VF3 2013 is an attractive choice for manufacturers that need more machining capacity than a compact VMC can provide. With 40 inches of X-axis travel, the VF3 offers a significantly larger working envelope while retaining the familiar vertical machining center format.

The 48 × 18-inch table provides enough surface area for larger vises, fixtures, multiple workpieces, or rotary equipment. Its approximately 3,500-pound evenly distributed table capacity also gives manufacturers flexibility when working with heavier components.

The CAT40 spindle is another major advantage. CAT40 tooling is widely available, giving shops access to a broad range of end mills, drills, shell mills, boring tools, holders, and specialty tooling.

The documented 2013 configuration includes an 8,100 RPM spindle and 24-tool automatic changer, making it suitable for jobs requiring multiple machining operations.

Another benefit is the VF3’s compatibility with rotary equipment. A machine equipped with 4th-axis preparation or a complete rotary system can machine additional faces and features without repeatedly removing the workpiece.

The VF3 is also a practical machine for job shops because its work envelope is large enough for many medium-sized components while remaining more economical and manageable than a large horizontal or bridge machining center.

For businesses purchasing used equipment, a 2013 machine can offer a favorable balance between acquisition cost, available machining capacity, tooling compatibility, and production capability.

HOW MUCH DOES A USED HAAS VF3 2013 COST?

The price of a used HAAS VF3 2013 depends primarily on condition, spindle hours, control configuration, included options, and overall machine history.

A low-hour machine with a healthy spindle, accurate axes, good linear guides, a functioning automatic tool changer, probing, chip conveyor, and 4th-axis preparation can command a higher price than a heavily used basic configuration.

The spindle should receive particular attention during evaluation. Buyers should test it across a range of RPMs and listen for bearing noise, vibration, or unusual temperature increases. Spindle taper condition and tool retention should also be inspected.

The X, Y, and Z axes should be tested through their complete travel. Excessive backlash, servo alarms, ballscrew noise, or inconsistent positioning can indicate expensive repairs.

The condition of the 24-tool ATC is also important. Every tool pocket should be cycled, and automatic tool changes should be tested repeatedly. A damaged tool changer can significantly affect the value of a used VMC.

The table should be inspected for damage, excessive wear, damaged T-slots, and signs of previous crashes. If the machine includes a probe or rotary-axis equipment, those systems should also be tested.

Buyers should request spindle-hour and power-on-hour information, maintenance records, previous service documentation, and a complete list of included accessories.

For a used 2013 HAAS VF3, the best value is generally a machine that has been properly maintained and can demonstrate good spindle performance, axis accuracy, reliable tool changing, and clean CNC operation rather than simply the machine with the lowest asking price.

INDUSTRIES THAT USE HAAS VF3

Aerospace Manufacturing
Automotive Manufacturing
Medical Device Manufacturing
General Machine Shops
Job Shops
Contract Manufacturing
Defense Manufacturing
Industrial Equipment Manufacturing
Electronics Manufacturing
Hydraulic Component Manufacturing
Mold & Die Manufacturing
Prototype Manufacturing
Precision Engineering
Maintenance Departments

TYPICAL PARTS HAAS VF3 CAN PRODUCE

Machine Components
Fixtures
Brackets
Housings
Plates
Flanges
Automotive Components
Aerospace Components
Hydraulic Components
Pump Components
Valve Components
Tooling Components
Molds
Dies
Precision Mechanical Parts
Prototype Components

WHAT TO INSPECT BEFORE BUYING HAAS VF3 2013

Spindle

Check spindle runout.
Test multiple RPM ranges.
Listen for bearing noise.
Check spindle temperature.
Inspect CAT40 taper.
Verify tool retention.
Test spindle orientation.

Axes

Check X-axis travel.
Check Y-axis travel.
Check Z-axis travel.
Test rapid movements.
Check backlash.
Inspect ballscrews.
Inspect linear guides.
Verify positioning accuracy.

Tool Changer

Cycle every tool pocket.
Test automatic tool changes.
Inspect tool pots.
Check carousel alignment.
Verify tool retention.
Listen for abnormal ATC noise.

Table

Inspect T-slots.
Check table surface.
Look for crash damage.
Verify table flatness.
Check fixture mounting areas.

CNC Control

Test display.
Check keypad.
Review machine alarms.
Test program execution.
Check memory.
Verify communication ports.
Confirm software options.

Coolant and Chip Removal

Test coolant pump.
Check coolant tank.
Inspect coolant lines.
Test chip conveyor or auger if equipped.
Check for leaks.
Test chip washdown.

Optional Equipment

Test tool probe.
Test work probe.
Test 4th-axis drive.
Verify rotary-axis compatibility.
Test through-tool coolant if equipped.
Test high-pressure coolant if equipped.

WHY CHOOSE HAAS VF3 2013

The HAAS VF3 2013 provides a strong combination of large machining travels, CAT40 tooling, high-speed spindle capability, automatic tool changing, a substantial worktable, and straightforward CNC operation.

Its 40 × 20 × 25-inch travels make it substantially more capable for larger components than smaller VMCs, while its 48 × 18-inch table and approximately 3,500-pound capacity provide considerable workholding flexibility.

The documented 2013 configuration’s 8,100 RPM spindle, 20 HP motor, and 24-tool ATC provide a practical foundation for production and job-shop machining.

For manufacturers looking for a used vertical machining center capable of handling medium-to-large precision components, production work, fixtures, tooling, molds, and general machining, the HAAS VF3 2013 remains a versatile option.

Products

Machine make

Model

Machine type