The Haas UMC‑1000 is a large-frame 5-axis vertical machining center engineered for manufacturers that require the flexibility of full simultaneous 5-axis machining with expanded travels and increased load capacity. As the larger sibling to the popular UMC‑750, the UMC‑1000 delivers increased versatility and machining performance for larger, heavier, and more complex parts — all in a user-friendly, compact footprint.
Built on a rugged cast-iron structure, the UMC‑1000 features X-axis travel of over 1 meter, a powerful 40-taper inline direct-drive spindle, and a dual-axis trunnion rotary table for full 5-sided or 5-axis simultaneous machining. The machine is controlled by Haas’ intuitive Next-Gen Control (NGC), offering built-in 5-axis features like DWO/TCPC, which greatly simplifies programming and part setup.
Ideal for aerospace, automotive, medical, energy, and precision engineering, the UMC‑1000 allows shops to reduce setups, increase accuracy, and take on complex geometry jobs that traditional 3-axis machines cannot efficiently handle.
HAAS UMC1000SPECIFICATIONS
AXIS TRAVELS
X-Axis: 1,016 mm (40 in)
Y-Axis: 635 mm (25 in)
Z-Axis: 635 mm (25 in)
B-Axis (Tilt): +120° to -35°
C-Axis (Rotation): 360° continuous
SPINDLE
Taper: 40-taper (CAT or BT)
Max Speed: 8,100 rpm (standard); 10,000 rpm optional
Spindle Power: 22.4 kW (30 hp) vector drive
Max Torque: ~122 Nm
Drive: Inline direct-drive
Cooling: Liquid-cooled motor
ROTARY TABLE
Diameter: 500 mm (19.7 in)
Max Workpiece Diameter: 762 mm (30 in)
Max Table Load: 454 kg (1,000 lbs)
B and C Axis Resolution: 0.001°
Diameter: 500 mm (19.7 in)
TOOL CHANGER
Type: 30+1 side-mount tool changer (SMTC)
Max Tool Diameter: 76 mm (adjacent), 127 mm (non-adjacent)
Max Tool Length: 330 mm
Max Tool Weight: 5.4 kg
Tool Change Time: ~2.8 sec (chip-to-chip)
FEEDRATES
Rapid Traverse (X/Y/Z): 25.4 m/min (1,000 ipm)
Max Cutting Feedrate: 12.7 m/min (500 ipm)
COOLANT & CHIP MANAGEMENT
Flood Coolant: Standard
Through-Spindle Coolant (TSC): Optional up to 300 psi
Chip Conveyor or Auger: Optional
Programmable Coolant Nozzle: Optional
CONTROL SYSTEM
Haas Next-Gen Control with 5-axis features
DWO/TCPC (Dynamic Work Offsets & Tool Center Point Control)
Wi-Fi, Ethernet, USB ports included
Optional Renishaw probing system
POWER & AIR REQUIREMENTS
Electrical Power: ~35 – 40 kVA
Air Pressure: ~0.5 – 0.6 MPa (80–90 psi)
HAAS UMC‑1000 – GENERAL INFORMATION
Model: Haas UMC‑1000
Machine Type: 5-Axis Vertical Machining Center
Spindle Taper: 40-taper (CAT or BT 40)
Table Type: Integrated dual-axis trunnion (B and C axes)
Control System: Haas Next-Gen Control (NGC)
Design: Heavy-duty cast-iron frame with wide base for stability
HAAS UMC‑1000 – KEY CAPABILITIES
Large work envelope and trunnion capacity
Full 5-axis simultaneous machining
One-setup machining of complex, multi-face parts
Excellent rigidity for heavy-duty and high-speed work
Compatible with probing, tool presetters, and automation kits
Ideal for large molds, aerospace structures, and energy parts
INDUSTRIES THAT USE HAAS UMC‑1000
Aerospace (large brackets, turbine rings, mounts)
Automotive (engine blocks, custom tooling)
Oil & Gas (valves, pressure housings)
Medical (implant machining, surgical jigs)
Precision Mold & Die
Defense and Energy Sectors
TYPICAL PARTS HAAS UMC‑1000 CAN PRODUCE
Aerospace structural components
Medical implants and orthopedic parts
Mold bases, cavities, and inserts
Engine mounts and manifolds
Complex enclosures with angled surfaces
Gear housings and heat exchanger plates
WHY CHOOSE THE HAAS UMC‑1000
Larger travels than UMC‑750 for bigger parts and fixtures
Greater weight capacity with the same 5-axis versatility
Integrated rotary table for fewer setups and higher precision
Faster return on investment in high-mix, complex-part environments
Built-in 5-axis support features make programming easier
U.S.-built, reliable, and backed by Haas’ global support network
Summary Table
Parameter
Value
Travels (X/Y/Z)
1,016 / 635 / 635 mm
Spindle Taper
40-taper (CAT or BT)
Spindle Speed
8,100 – 10,000 rpm
Spindle Power
22.4 kW (30 hp)
Table Size
Ø 500 mm
Max Table Load
454 kg (1,000 lbs)
Rotary Axes
B: +120°/-35°, C: 360° continuous
Tool Changer
30+1 SMTC
Control System
Haas Next-Gen Control
5-Axis Features
DWO/TCPC, probing ready
How much does used HAAS UMC‑1000 cost? Used Machine Price Range (Approximate)
Configuration
Estimated Price (USD)
Base Model (8.1k spindle, 30+1 SMTC)
$110,000 – $135,000
Mid-Spec (10k spindle, TSC, probing)
$140,000 – $165,000
High-End (automation ready, full 5-axis suite)
$170,000 – $200,000+
Prices vary depending on build year, spindle hours, tool count, and installed options.
