USED HAAS TM3P – 2018

The HAAS TM3P – 2018 is a CNC toolroom vertical machining center designed to combine the flexibility of a manual-style toolroom mill with the precision and productivity of Haas CNC control. It is part of the Haas TM-P Series and is particularly well suited to job shops, prototype manufacturing, educational facilities, maintenance departments, tooling operations, and small-batch production.

The TM3P provides a substantial 40 inches of X-axis travel, 20 inches of Y-axis travel, and 16 inches of Z-axis travel, giving it considerably more working area than smaller TM-series machines. It uses a 40-taper spindle with a 6,000 RPM belt-drive system and 7.5 HP motor. Haas documentation identifies the TM3P with a 20-station carousel tool changer, although documented 2018 machines can also be found with 10-station configurations, so the actual ATC should be verified on an individual machine.

A documented 2018 TM3P has 40 x 20 x 16-inch travels, 6,000 RPM spindle, 7.5 HP motor, CT/BT 40 tooling, WIPS probing, rigid tapping, chip auger, and Haas CNC control. Some machines were equipped with 4th-axis drives and wiring, programmable coolant, air blast, and 20-pocket tool changers.

---

HAAS TM3P – 2018 – AXIS

Specification	Details
Machine Type	CNC Toolroom Vertical Machining Center
Axis Configuration	3-Axis
X-Axis Travel	40″ / 1,016 mm
Y-Axis Travel	20″ / 508 mm
Z-Axis Travel	16″ / 406 mm
CNC Interpolation	3-Axis
4th-Axis Capability	Available
Rotary Integration	Available
Spindle Orientation	Available
Rigid Tapping	Available

The TM3P is primarily a 3-axis machine, but Haas offered 4th-axis drives and wiring for rotary machining applications.

---

HAAS TM3P – 2018 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	40″ / 1,016 mm
Y-Axis Travel	20″ / 508 mm
Z-Axis Travel	16″ / 406 mm
Table Working Area	57.75″ x 14.5″
Spindle-to-Table Clearance	Configuration Dependent
Maximum Table Load	Approx. 1,000 lbs
X/Y/Z Rapid Rate	Approx. 400 IPM
Maximum Cutting Feedrate	Approx. 400 IPM
Work Envelope	40″ x 20″ x 16″

The 2018 TM3P offers a large 40 x 20 x 16-inch travel envelope, making it suitable for larger fixtures, plates, tooling, and long components.

---

HAAS TM3P – 2018 – CAPACITY / TABLE

Specification	Details
Table Length	57.75″ / 1,466.8 mm
Table Width	14.5″ / 368.3 mm
Maximum Table Load	Approx. 1,000 lbs
T-Slots	Configuration Dependent
Workholding	Vise / Fixture / Rotary
4th-Axis Integration	Available
Rotary Table Support	Yes
Workpiece Support	General Purpose
Table Type	Fixed T-Slot

The long 57.75 x 14.5-inch table gives the TM3P a useful advantage for long workpieces and multiple fixtures. A documented 2018 machine lists approximately 1,000 pounds maximum table load.

---

HAAS TM3P – 2018 – SPINDLE

Specification	Details
Spindle Type	Belt Drive
Spindle Taper	CT40 / BT40
Maximum Spindle Speed	6,000 RPM
Spindle Motor	7.5 HP / 5.6 kW
Maximum Torque	Approx. 33 ft-lb
Spindle Orientation	Available
Tool Retention	Automatic
Spindle Cooling	Configuration Dependent
High-Speed Spindle Option	Available on TM Series

The standard TM3P configuration uses a 7.5 HP, 6,000 RPM belt-driven spindle with 40-taper tooling. Haas documentation also identifies higher-speed spindle options for the TM Series.

---

HAAS TM3P – 2018 – TOOL CHANGER

Specification	Details
Tool Changer	Automatic Tool Changer
Standard TM3P Configuration	20-Station Carousel
Documented 2018 Configuration	10 or 20 Stations
Tool Taper	CT40 / BT40
Maximum Tool Diameter	Approx. 3.5″
Maximum Tool Weight	Approx. 12 lbs
Tool-to-Tool Time	Approx. 5.7 sec
Chip-to-Chip Time	Approx. 6.5 sec
Tool Management	CNC Controlled
Automatic Tool Change	Yes

Haas’ TM-P documentation identifies the TM3P with a 20-station carousel, while documented 2018 machines show both 10- and 20-tool configurations. The installed ATC should therefore be confirmed on the specific machine.

---

HAAS TM3P – 2018 – CONTROL SYSTEM

Specification	Details
CNC Control	Haas CNC Control
Programming	G-Code / Intuitive Programming
Visual Programming System	Available
Memory	1 GB on Documented Configuration
USB	Yes
Ethernet	Yes
WiFi	Available
HaasConnect	Available
User-Definable Macros	Available
Coordinate Rotation & Scaling	Available
Rigid Tapping	Available

A documented 2018 machine includes Haas CNC control, WIPS, rigid tapping, coordinate rotation and scaling, visual programming, user-definable macros, 1 GB memory, WiFi/Ethernet, and HaasConnect.

---

HAAS TM3P – 2018 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 400 IPM
Y-Axis Rapid Traverse	Approx. 400 IPM
Z-Axis Rapid Traverse	Approx. 400 IPM
Maximum Cutting Feedrate	Approx. 400 IPM
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes
Rigid Tapping	Available
Feedrate Control	CNC Controlled

A documented 2018 TM3P specifies 400 IPM rapid rates on X, Y, and Z, with maximum cutting feed also listed at approximately 400 IPM.

---

HAAS TM3P – 2018 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Equipped
Coolant Tank	Equipped
Coolant Pump	High-Flow Option
Programmable Coolant Nozzle	Available
Chip Auger	Available
Chip Conveyor	Configuration Dependent
Air Blast	Available
Through-Spindle Coolant	Configuration Dependent
Coolant Filtration	Configuration Dependent
Mist Collector	Optional

Documented 2018 machines include a high-flow coolant pump, coolant tank, chip auger, programmable coolant, and air blast, depending on configuration.

---

HAAS TM3P – 2018 – AUTOMATION / PROBING

Specification	Details
Wireless Intuitive Probing System	Available
Work Probe	Available
Tool Probe	Available
4th-Axis Drive	Available
4th-Axis Wiring	Available
Rigid Tapping	Available
Chip Auger	Available
Programmable Coolant	Available
Air Blast	Available
Rotary Table Integration	Available

A documented 2018 TM3P is equipped with WIPS, rigid tapping, chip auger, programmable coolant, air blast, and 4th-axis drive/wiring, illustrating the range of options available on this model.

---

HAAS TM3P – 2018 – POWER REQUIREMENTS

Specification	Details
Spindle Motor	7.5 HP / 5.6 kW
Electrical Service	Single or 3-Phase
Voltage	Configuration Dependent
Frequency	Configuration Dependent
Electrical Cabinet	Integrated
Shop Air	Required
Transformer	Configuration Dependent
Total Power Requirement	Configuration Dependent
Power Type	Industrial CNC

The TM3P has been offered in single- or three-phase configurations, although the exact electrical requirements should be confirmed from the machine’s electrical data plate before installation.

---

HAAS TM3P – 2018 – DIMENSIONS

Specification	Details
Approximate Length	130–137″
Approximate Width	88–115″
Approximate Height	98–103″
Approximate Weight	5,900–6,200 lbs
Metric Weight	Approx. 2,676–2,812 kg
Floor Space	Large Toolroom Mill
Installation	Industrial
Rigging	Required

Published and documented 2018 specifications vary depending on enclosure and installed options. MachineTools lists approximately 137 x 115 x 103 inches and 5,900 lbs, while another documented 2018 machine lists approximately 130 x 88 x 98 inches and 6,200 lbs.

---

HAAS TM3P – 2018 – GENERAL INFORMATION

Specification	Details
Manufacturer	Haas
Model	TM3P
Year	2018
Machine Category	Vertical Machining Center
Machine Type	CNC Toolroom Mill
Axis Configuration	3-Axis
X-Axis Travel	40″
Y-Axis Travel	20″
Z-Axis Travel	16″
Table Size	57.75″ x 14.5″
Maximum Table Load	Approx. 1,000 lbs
Spindle Speed	6,000 RPM
Spindle Power	7.5 HP
Spindle Taper	CT40 / BT40
Tool Capacity	10 or 20 Stations
CNC Control	Haas CNC
Rapid Traverse	Approx. 400 IPM
4th-Axis Ready	Available
Machine Weight	Approx. 5,900–6,200 lbs

---

INDUSTRIES THAT USE HAAS TM3P

The HAAS TM3P is well suited to a wide range of machining environments, including:

• General job shops
• Aerospace
• Automotive
• Defense
• Tool and die
• Mold manufacturing
• Industrial machinery
• Maintenance and repair
• Prototype manufacturing
• Educational facilities
• Fabrication
• Contract manufacturing
• Precision engineering

Its long X-axis travel is particularly useful for shops that frequently machine long plates, fixtures, rails, brackets, and tooling components.

---

TYPICAL PARTS HAAS TM3P CAN PRODUCE

The TM3P can produce:

• Brackets
• Mounting plates
• Fixtures
• Jigs
• Housings
• Flanges
• Tooling components
• Prototype components
• Machine bases
• Industrial brackets
• Automotive components
• Aerospace parts
• Long plates
• Custom production parts

Typical operations include face milling, pocketing, contouring, drilling, tapping, boring, reaming, slotting, and 3-axis profiling.

---

WHY CHOOSE HAAS TM3P

The primary advantage of the HAAS TM3P is its unusually large work envelope for a toolroom-oriented CNC machine. The 40 x 20 x 16-inch travels allow it to handle parts and fixtures that may be too large for smaller TM-series machines.

The 40-taper spindle and 7.5 HP, 6,000 RPM belt-driven spindle provide sufficient capability for general machining applications, while the Haas CNC control makes the machine easier to program and operate than a conventional manual toolroom mill.

Another benefit is flexibility. Depending on configuration, the TM3P can have WIPS probing, rigid tapping, 4th-axis capability, programmable coolant, chip auger, air blast, macros, and a 20-station tool changer. This makes a properly equipped machine useful for both prototype work and repeat production.

---

WHY BUY USED HAAS TM3P – 2018

A used 2018 HAAS TM3P can be an attractive option for manufacturers that need a large-travel CNC machine without moving to a substantially larger and more expensive VMC.

Because the machine is from 2018, it can offer a comparatively modern Haas control platform while retaining the simple and accessible design of the TM-P toolroom series. A documented example had fewer than 500 cutting hours, demonstrating that low-hour machines from this model year can still appear on the used market.

Before buying, inspect the spindle, ballscrews, linear guides, table, tool changer, drawbar, control, coolant system, chip auger, and electrical cabinet. For a used 2018 unit, request power-on hours, cutting hours, spindle hours, maintenance records, crash history, and a test-cut demonstration.

If equipped with WIPS, 4th-axis wiring, rigid tapping, chip auger, and a 20-tool changer, a used TM3P can provide significantly greater production capability than a basic configuration.

---

HOW MUCH DOES A USED HAAS TM3P – 2018 COST?

The used price of a 2018 HAAS TM3P varies considerably based on spindle hours, machine condition, ATC capacity, probing, chip management, rotary equipment, and included tooling.

A documented 2018 TM3P with less than 500 cutting hours was equipped with WIPS, rigid tapping, chip auger, HaasConnect, 1 GB memory, programmable coolant, and other options. Another 2018 machine is listed with a 20-pocket ATC, probing package, chip auger, 4th-axis drive/wiring, air blast, and programmable coolant.

Because used dealers do not consistently publish final transaction prices, the following is a practical market estimate rather than a verified sale price:

USED HAAS TM3P – 2018 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$30,000 – $38,000
Functional Used Machine	$38,000 – $45,000
Good Condition / Production Ready	$45,000 – $52,000
Excellent / Well Equipped	$52,000 – $60,000
Very Low Hours / Premium Configuration	$60,000+

For a 2018 HAAS TM3P in good working condition, I would estimate approximately $40,000–$55,000 USD.

For your inventory listing, I would recommend a practical estimated asking-price range of $45,000–$55,000 USD for a clean, operational machine.

A low-hour machine with 20-tool ATC, WIPS probing, 4th-axis capability, chip auger, programmable coolant, rigid tapping, air blast, and excellent mechanical condition could reasonably command $55,000–$60,000+.

A high-hour basic machine with a 10-tool changer, significant spindle wear, or mechanical/control issues could fall closer to $30,000–$40,000.

Best estimated listing value: $45,000–$55,000 USD.

The exact 2018 configuration should be verified before publishing the listing, especially the 10- versus 20-station ATC, spindle options, 4th-axis equipment, probing, chip-management system, and electrical configuration.