USED HAAS DS30Y – 2017
The HAAS DS30Y – 2017 is a dual-spindle Y-axis CNC turning center designed for high-productivity machining of precision components that require turning, milling, drilling, tapping, and secondary operations in a single setup. The machine combines a 10-inch main chuck, 8.3-inch secondary spindle chuck, Y-axis capability, C-axis functionality, and live tooling to provide a versatile “done-in-one” machining platform. Haas documentation for the DS-30Y identifies a 12-station BMT65 turret with 4,000 RPM live tooling and synchronized C-axis capability.
The main spindle provides a 3.00-inch / 76 mm bar capacity and reaches up to 4,500 RPM, while the secondary spindle reaches 4,000 RPM and uses an A2-5 spindle nose with an 8.3-inch chuck. The opposed spindles can be synchronized for part transfer, allowing components to be machined on the front and back sides without removing the workpiece from the machine.
The DS30Y provides 9.40 inches of X-axis travel, ±2.00 inches of Y-axis travel, and 32.50 inches of Z-axis travel. Its BMT65 live-tooling turret supports milling, drilling, and tapping operations, while the C-axis provides angular positioning and interpolation for driven-tool work. The machine has a maximum cutting diameter of approximately 13.75 inches and a maximum cutting length of 32.5 inches, depending on workholding and configuration.
The 2017-era DS-30Y documentation also shows a 55-gallon coolant tank, and Haas provides options such as high-pressure coolant and belt-type chip conveyors. Actual options can vary from one individual 2017 machine to another.
HAAS DS30Y 2017 – AXIS
| Specification Details | Value |
|---|---|
| Machine Configuration | Dual-Spindle Y-Axis CNC Turning Center |
| Main Spindle Axes | X, Z, C |
| Y-Axis | Yes |
| Secondary Spindle | Yes |
| Secondary Spindle C-Axis | Yes |
| Main C-Axis | Yes |
| Number of Spindles | 2 |
| Main Turret | 12 Station BMT65 |
| Live Tooling | Yes |
| CNC Control | Haas CNC Control |
The DS30Y combines conventional CNC turning with Y-axis and C-axis machining. Its dual-spindle configuration allows the machine to transfer parts between spindles and complete secondary operations without requiring a separate setup.
HAAS DS30Y 2017 – AXIS TRAVELS / WORK ENVELOPE
| Axis / Specification | Travel |
|---|---|
| X Axis Travel | 9.40 in / 239 mm |
| Y Axis Travel | ±2.00 in / ±51 mm |
| Z Axis Travel | 32.50 in / 826 mm |
| Main C Axis | 0.01° positioning |
| Secondary C Axis | 0.01° positioning |
| X Axis Rapid | 472 ipm / 12 m/min |
| Y Axis Rapid | 472 ipm / 12 m/min |
| Z Axis Rapid | 945 ipm / 24 m/min |
| Maximum Cutting Length | 32.5 in / 826 mm |
The DS30Y provides a relatively large turning envelope for a medium-sized dual-spindle machine. The ±2-inch Y-axis movement allows the live tooling to reach off-center features for milling, drilling, and tapping operations.
HAAS DS30Y 2017 – CAPACITY
| Specification Details | Value |
|---|---|
| Main Chuck Size | 10 in / 254 mm |
| Secondary Chuck Size | 8.3 in / 210 mm |
| Maximum Part Swing | 21 in / 533 mm |
| Maximum Cutting Diameter | 13.75 in / 349 mm |
| Maximum Cutting Length | 32.5 in / 826 mm |
| Between Centers | 32.5 in / 826 mm |
| Main Spindle Bar Capacity | 3.00 in / 76 mm |
| Main Spindle Bore | 3.50 in / 88.9 mm |
| Secondary Spindle Bore | 2.31 in / 58.7 mm |
The 3-inch main-spindle bar capacity allows the DS30Y to process a wide range of bar-stock components. The secondary spindle provides an 8.3-inch chuck and is designed for part transfer, secondary turning, and C-axis-driven operations.
HAAS DS30Y 2017 – SPINDLE
| Specification | Main Spindle | Secondary Spindle |
|---|---|---|
| Maximum Spindle Speed | 4,500 RPM | 4,000 RPM |
| Spindle Power | 30 HP / 22.4 kW | 15 HP / 11.2 kW |
| Spindle Nose | A2-6 | A2-5 |
| Chuck Size | 10 in | 8.3 in |
| Main Spindle Bore | 3.50 in | — |
| Spindle Type | Main Turning | Secondary / Transfer |
| Drive System | Direct Speed / Belt Drive | Direct Speed / Belt Drive |
The main spindle provides 30 HP and 4,500 RPM, while the secondary spindle provides 15 HP and 4,000 RPM. The opposed-spindle arrangement allows parts to be passed from the main spindle to the secondary spindle for additional operations.
HAAS DS30Y 2017 – MILLING SPINDLE
| Specification Details | Value |
|---|---|
| Driven Tooling | Yes |
| Turret Type | BMT65 |
| Turret Capacity | 12 Stations |
| Live Tool Speed | Up to 4,000 RPM |
| Drive Ratio | 1:1 |
| Y-Axis Milling | Yes |
| C-Axis Milling | Yes |
| Milling Capability | Off-Center Milling |
| Drilling Capability | Yes |
| Tapping Capability | Yes |
The DS30Y uses BMT65 driven tooling to perform milling, drilling, and tapping directly on the turning center. The Y-axis allows the live tooling to move away from the spindle centerline, making it possible to machine off-center features without transferring the part to a separate machining center.
HAAS DS30Y 2017 – TOOL CHANGER
| Specification Details | Value |
|---|---|
| Turret Type | BMT65 |
| Number of Stations | 12 |
| Live Tooling | Yes |
| Live Tool Speed | Up to 4,000 RPM |
| Tooling Configuration | Turning + Driven Tooling |
| OD / ID Tooling | Flexible Configuration |
| Boring Bar Clearance | 4.00 in / 102 mm |
The DS30Y uses a 12-station BMT65 turret rather than a conventional machining-center-style automatic tool changer. The turret combines standard turning tools with driven-tool stations for milling and drilling operations.
HAAS DS30Y 2017 – CONTROL SYSTEM
| Specification Details | Value |
|---|---|
| CNC Control | Haas CNC Control |
| Control Type | CNC Turning / Y-Axis Control |
| C-Axis Control | Yes |
| Y-Axis Control | Yes |
| Dual-Spindle Control | Yes |
| Rigid Tapping | Yes |
| Spindle Orientation | Yes |
| Ethernet | Available |
| USB | Yes |
| Program Memory | Verify by configuration |
The Haas CNC control manages the DS30Y’s turning, Y-axis, C-axis, live-tooling, and dual-spindle functions. Haas documentation also identifies features including rigid tapping, spindle orientation, Ethernet connectivity, advanced tool management, and remote-monitoring capabilities on the DS-series platform.
HAAS DS30Y 2017 – COOLANT / CHIP MANAGEMENT
| Specification Details | Value |
|---|---|
| Coolant Capacity | 55 gal / 208 L |
| Coolant System | Multi-Stage Pump |
| High-Pressure Coolant | Available / Optional |
| Chip Conveyor | Available / Optional |
| Chip Management | Conveyor or Standard Collection |
| Coolant Refill | Optional |
| Enclosure Exhaust | Optional |
The DS30Y uses a 55-gallon coolant tank and multi-stage coolant pump. Depending on the individual 2017 machine, additional equipment such as a belt-type chip conveyor, high-pressure coolant, automatic coolant refill, or enclosure exhaust may also be installed.
HAAS DS30Y 2017 – POWER REQUIREMENTS
| Specification Details | Value |
|---|---|
| Main Spindle Power | 30 HP / 22.4 kW |
| Secondary Spindle Power | 15 HP / 11.2 kW |
| Main Spindle Speed | 4,500 RPM |
| Secondary Spindle Speed | 4,000 RPM |
| Input Voltage | 220 VAC, 3 Phase |
| Low Voltage Full Load | 70 A |
| High Input Voltage | 440 VAC, 3 Phase |
| High Voltage Full Load | 35 A |
| Minimum Air Pressure | 80 psi / 5.5 bar |
| Air Requirement | 4 SCFM @ 100 psi |
Haas documentation identifies 220 VAC or 440 VAC three-phase electrical configurations, with 70 A full-load current at 220 V and 35 A at 440 V. Actual electrical requirements should be verified from the individual machine’s electrical documentation and nameplate before installation.
HAAS DS30Y 2017 – DIMENSIONS
| Specification Details | Value |
|---|---|
| Shipping Length | Approximately 171 in / 434 cm |
| Shipping Width | Approximately 90 in / 229 cm |
| Shipping Height | Approximately 98 in / 249 cm |
| Coolant Tank | 55 gal / 208 L |
| Machine Footprint | Verify individual configuration |
| Chip Conveyor | May increase required clearance |
| Installation | Allow additional service space |
Haas documentation lists shipping dimensions of approximately 171 x 90 x 98 inches for the DS30Y. Installation space should also account for the coolant system, chip-management equipment, doors, service access, and material handling.
HAAS DS30Y 2017 – GENERAL INFORMATION
| Specification Details | Value |
|---|---|
| Manufacturer | HAAS |
| Model | DS30Y |
| Year | 2017 |
| Machine Type | Dual-Spindle Y-Axis CNC Lathe |
| Configuration | Dual Spindle |
| Main Chuck | 10 in / 254 mm |
| Secondary Chuck | 8.3 in / 210 mm |
| Main Bar Capacity | 3.00 in / 76 mm |
| Main Spindle Speed | 4,500 RPM |
| Secondary Spindle Speed | 4,000 RPM |
| Main Spindle Power | 30 HP / 22.4 kW |
| Secondary Spindle Power | 15 HP / 11.2 kW |
| Turret | 12 Station BMT65 |
| Live Tooling | 4,000 RPM |
| Y-Axis | ±2.00 in / ±51 mm |
| C-Axis | Yes |
| Maximum Cutting Diameter | 13.75 in / 349 mm |
| Maximum Cutting Length | 32.5 in / 826 mm |
| Coolant Capacity | 55 gal / 208 L |
INDUSTRIES THAT USE HAAS DS30Y
The HAAS DS30Y is suited to production environments where components require turning combined with secondary milling, drilling, tapping, and back-side machining. Its dual-spindle configuration can reduce the number of setups required for components that need machining on both ends.
Common industries and applications include:
- Automotive component manufacturing
- Aerospace component manufacturing
- Hydraulic and pneumatic components
- Oil and gas equipment
- Industrial machinery
- Electrical components
- Medical component manufacturing
- Precision engineering
- General contract machining
- Production machining
The machine’s Y-axis and live tooling are particularly useful for manufacturers producing components with cross holes, milled flats, slots, bolt patterns, and other off-center features.
TYPICAL PARTS HAAS DS30Y CAN PRODUCE
The DS30Y can be used to manufacture a wide variety of turned and multi-operation components, including:
- Shafts
- Bushings
- Pins
- Hydraulic fittings
- Pneumatic fittings
- Valve components
- Flanges
- Sleeves
- Connectors
- Spacers
- Couplings
- Automotive components
- Industrial fittings
- Precision turned components
With its Y-axis and driven tooling, the machine can also produce components requiring:
- Off-center holes
- Cross holes
- Milled flats
- Slots
- Keyways
- Threaded holes
- Face milling
- Radial drilling
- Secondary turning operations
The dual-spindle design allows many components to be transferred from the main spindle to the secondary spindle for additional machining, helping reduce manual repositioning and separate setups.
WHY CHOOSE HAAS DS30Y
The HAAS DS30Y combines dual-spindle turning, Y-axis movement, C-axis control, and live tooling in a single CNC turning center. This configuration allows manufacturers to perform several operations on one machine instead of moving components between a lathe and a separate machining center.
The 30 HP main spindle, 4,500 RPM maximum speed, 3-inch bar capacity, 12-station BMT65 turret, and 4,000 RPM live tooling provide a useful combination of production capacity and secondary machining capability. The 8.3-inch secondary spindle can take over the component for back-side machining, while synchronized spindle operation supports part transfer between the two spindles.
The ±2-inch Y-axis travel gives the DS30Y the ability to perform off-center machining, while the C-axis provides angular positioning and interpolation for driven-tool operations. This makes the machine suitable for components that would otherwise require multiple setups.
WHY BUY USED HAAS DS30Y
Buying a used HAAS DS30Y can provide access to dual-spindle turning, Y-axis machining, C-axis capability, and live tooling at a lower acquisition cost than purchasing a comparable new production machine. For manufacturers producing repeat precision components, the machine’s ability to combine multiple operations can help reduce setup time and work-in-process handling.
A properly inspected used DS30Y may include valuable features such as:
- Haas CNC control
- 10-inch main chuck
- 8.3-inch secondary spindle chuck
- 3-inch bar capacity
- 30 HP main spindle
- 15 HP secondary spindle
- 4,500 RPM main spindle
- 4,000 RPM secondary spindle
- 12-station BMT65 turret
- 4,000 RPM live tooling
- Y-axis
- C-axis
- Fully synchronized spindles
- Part transfer capability
- Rigid tapping
- Spindle orientation
- 55-gallon coolant tank
- High-pressure coolant on equipped machines
- Chip conveyor on equipped machines
Before purchasing, buyers should inspect the main spindle, secondary spindle, C-axis brakes, Y-axis movement, turret indexing, live tooling, spindle synchronization, part-transfer operation, machine geometry, Haas control, coolant system, chip conveyor, hydraulic system, and overall machine condition. Options can vary between individual 2017 machines.
HOW MUCH DOES A USED HAAS DS30Y COST?
Public asking prices for used HAAS DS30Y machines can vary depending on year, spindle hours, machine condition, tooling, included options, location, and service history. The DS30Y has also been offered in different configurations and with optional equipment such as chip conveyors, high-pressure coolant, additional tooling, and other productivity options, so two machines of the same year can have substantially different equipment packages.
For a used 2017 HAAS DS30Y, buyers should evaluate the machine based on its actual operating hours, spindle condition, turret condition, live-tooling condition, Y-axis accuracy, C-axis operation, secondary-spindle condition, control condition, tooling package, chip-management equipment, maintenance records, and included accessories rather than relying only on the model and year.
The final market price can also be affected by transportation and installation because the DS30Y is a substantial production turning center. Buyers should therefore consider the machine price together with rigging, freight, electrical installation, coolant equipment, tooling, and commissioning costs when determining the total acquisition cost.
Related Products
-
HAAS - VF6D
VIEW MACHINE -
HAAS - TM2
VIEW MACHINE -
HAAS - ST15
VIEW MACHINE -
HAAS - VF3SS
VIEW MACHINE