USED DOOSAN PUMA TT1300SYYB – 2008

The 2008 Doosan Puma TT1300SYYB is a high-performance twin-spindle, twin-turret CNC turning center engineered for high-volume production of complex precision components. Manufactured by Doosan Machine Tools (now DN Solutions), the TT1300SYYB combines two synchronized spindles, dual independent turrets, Y-axis machining, live tooling, and C-axis control to maximize productivity while minimizing cycle times. Its multi-tasking design allows simultaneous machining on both spindles, making it an ideal solution for manufacturers seeking increased throughput without sacrificing accuracy.

Built with a rigid one-piece slant-bed casting and precision roller linear guideways, the Puma TT1300SYYB delivers excellent thermal stability, high-speed performance, and superior surface finishes. Both upper and lower turrets feature live tooling and programmable Y-axis movement, enabling turning, milling, drilling, tapping, and off-center machining in a single setup. The synchronized dual-spindle configuration allows front and back machining to occur simultaneously, dramatically reducing production time and eliminating many secondary operations. This advanced configuration is especially beneficial for manufacturers producing complex components in medium- to high-volume production environments.

The 2008 model is commonly equipped with a FANUC CNC control, providing fast processing speeds, reliable G-code programming, and proven shop-floor performance. The machine utilizes independent upper and lower turrets, each with 12 tool stations, allowing multiple tools to operate simultaneously. High-speed live tooling, servo-driven turret indexing, and synchronized spindle operations significantly improve productivity while maintaining exceptional machining accuracy.

The Doosan Puma TT1300SYYB is widely used throughout the automotive, medical, aerospace, electronics, hydraulic, fluid power, and precision engineering industries. Typical applications include hydraulic fittings, medical implants, valve components, transmission parts, connectors, bushings, shafts, couplings, sensor housings, and other precision-machined components requiring multiple machining operations. Its ability to complete both primary and secondary operations within a single cycle makes it one of the most productive CNC turning platforms available.

Purchasing a used 2008 Doosan Puma TT1300SYYB provides manufacturers with advanced multi-tasking CNC technology at a significantly lower investment than purchasing a new machine. Thanks to its rugged construction, proven reliability, and efficient twin-turret design, the Puma TT1300SYYB continues to be highly sought after in the used CNC machine market. Properly maintained machines offer years of dependable service, exceptional accuracy, and outstanding production efficiency for shops focused on high-volume precision manufacturing.

DOOSAN PUMA TT1300SYYB – 2008 SPECIFICATIONS

Axis

Travels / Work Envelope

Table / Workholding

Spindle

Tool Changer

CNC Control

Coolant / Chip Management

Power Requirements

Dimensions

General Information

HOW MUCH DOES A USED DOOSAN PUMA TT1300SYYB – 2008 COST?

A used 2008 Doosan Puma TT1300SYYB typically sells for $90,000 to $170,000 USD, depending on spindle hours, machine condition, maintenance records, tooling package, and installed options such as high-pressure coolant, bar feeder interface, parts catcher, or automated loading systems. Machines with documented service history, low operating hours, and fully functional twin-turret synchronization generally command premium prices in the used CNC market.

When evaluating a used Puma TT1300SYYB, buyers should inspect spindle synchronization, live tooling performance, turret alignment, Y-axis accuracy, and overall machine geometry. A well-maintained machine can significantly increase production efficiency by completing multiple operations simultaneously, making it an excellent investment for manufacturers seeking to reduce cycle times while maintaining exceptional machining precision.

DOOSAN PUMA TT1300SYYB VS DOOSAN PUMA TT1800SY – WHICH ONE TO BUY?

The Doosan Puma TT1300SYYB and the Doosan Puma TT1800SY are both advanced multitasking CNC turning centers designed for high-volume production of complex precision components. While both machines feature twin spindles, live tooling, Y-axis capability, and high-speed machining performance, they are designed for different manufacturing requirements. The Puma TT1300SYYB is a twin-turret, twin-spindle machine with dual Y-axes, allowing true simultaneous machining on both spindles. The Puma TT1800SY, while also featuring twin spindles and Y-axis technology, utilizes a single upper turret and is better suited for medium-volume production with slightly larger workpieces.

The Puma TT1300SYYB is ideal for manufacturers producing small, highly complex parts in industries such as automotive, medical, electronics, and precision engineering. With two independent turrets, twin spindles, and simultaneous machining capability, it can dramatically reduce cycle times and increase productivity. The machine is especially effective for lights-out manufacturing and automated production environments where minimizing handling time is critical.

The Puma TT1800SY is better suited for manufacturers requiring greater turning length while still benefiting from multitasking capabilities. It offers excellent flexibility for machining shafts, hydraulic components, aerospace fittings, and general precision parts without the additional complexity of dual-turret programming.

If your production focuses on maximum throughput for small, complex components, the Puma TT1300SYYB is the superior choice because of its simultaneous machining capability. However, if your work involves slightly larger components and moderate production volumes, the Puma TT1800SY provides an excellent balance between flexibility, productivity, and operating cost.

DOOSAN PUMA TT1300SYYB MAIN SPINDLE NOT TURNING – CAUSES AND TROUBLESHOOTING

If the main spindle on your Doosan Puma TT1300SYYB fails to rotate, the issue is commonly related to machine safety conditions, spindle drive faults, hydraulic pressure, synchronization settings, or CNC programming rather than a complete spindle failure. Because the TT1300SYYB utilizes twin spindles operating independently or simultaneously, spindle interlocks should always be checked first.

Begin by reviewing the CNC control for active alarms. Emergency stop activation, open safety doors, hydraulic pressure warnings, lubrication alarms, spindle drive faults, or servo alarms will prevent spindle operation. Ensure both spindles have completed homing and that no synchronization alarms are active.

Next, inspect the spindle drive system. Loose electrical connections, faulty spindle amplifiers, damaged encoder cables, blown fuses, or spindle motor overloads can interrupt spindle rotation. Verify that lubrication systems, spindle cooling units, hydraulic pressure, coolant circulation, and pneumatic systems are operating within specification.

Review the CNC program carefully. Missing M03 or M04 commands, incorrect spindle speed commands, spindle synchronization errors, C-axis engagement, or unfinished turret movements can prevent spindle startup. Since the TT1300SYYB supports synchronized machining, improper synchronization commands between the main and sub-spindle may also stop spindle operation.

If the spindle attempts to rotate but immediately stops, inspect for mechanical issues such as seized spindle bearings, chuck interference, damaged collets, excessive workpiece loading, or spindle taper contamination. Excessive vibration, unusual spindle noise, or overheating generally indicates bearing wear requiring professional inspection.

Routine preventive maintenance, proper lubrication, clean spindle interfaces, and scheduled inspection of spindle cooling systems significantly reduce unexpected spindle failures. Persistent spindle alarms should be diagnosed using manufacturer-approved service procedures to avoid additional machine damage.

DOOSAN PUMA TT1300SYYB MAINTENANCE AND PREVENTIVE CARE GUIDE

The Doosan Puma TT1300SYYB is a sophisticated twin-spindle, twin-turret multitasking turning center designed for continuous production of complex precision parts. Because multiple machining systems operate simultaneously, regular preventive maintenance is essential for maintaining spindle accuracy, turret synchronization, machine reliability, and long-term productivity.

Daily maintenance should include removing chips from both machining areas, cleaning the main and sub-spindle noses, inspecting both turrets, checking coolant concentration, verifying lubrication oil levels, hydraulic pressure, pneumatic pressure, and spindle cooling system operation. Operators should also inspect chuck jaws, collets, tool holders, and live tooling interfaces for wear or contamination.

Weekly maintenance should include cleaning electrical cabinet filters, inspecting coolant pumps, chip conveyors, hydraulic systems, spindle air purge systems, automatic lubrication units, and both turret indexing mechanisms. Live tooling performance and spindle synchronization should also be verified before unattended production.

Monthly inspections should focus on spindle runout, turret alignment, Y-axis accuracy, ball screws, linear guideways, encoder cables, electrical connections, coolant filtration systems, hydraulic hoses, and machine leveling. Both coolant tanks should be cleaned regularly to prevent contamination that may affect machining quality.

Additional preventive maintenance includes monitoring spindle vibration, checking backlash, inspecting spindle bearings, replacing worn filters, maintaining cooling systems, and verifying machine geometry. Maintaining detailed maintenance records allows operators to identify developing issues before they become major repairs. Shops following structured preventive maintenance schedules typically experience longer spindle life, improved dimensional accuracy, higher productivity, and significantly reduced downtime.

FAQ

What is the Doosan Puma TT1300SYYB?

The Doosan Puma TT1300SYYB is a high-productivity CNC multitasking turning center featuring twin spindles, twin turrets, dual Y-axes, live tooling, and C-axis machining. Designed for complete “done-in-one” manufacturing, it allows simultaneous machining on both spindles, dramatically reducing cycle times while improving part accuracy. The machine is widely used for manufacturing automotive components, medical devices, hydraulic fittings, aerospace parts, and other high-precision components requiring complex turning and milling operations.

What are the most common problems with the Doosan Puma TT1300SYYB?

Common problems include main or sub-spindle alarms, spindle synchronization errors, turret indexing faults, live tooling malfunctions, Y-axis positioning errors, hydraulic pressure warnings, lubrication system alarms, encoder faults, servo drive errors, coolant contamination, chip conveyor problems, and occasional communication faults between the twin machining systems. Most of these issues can be minimized through regular preventive maintenance, scheduled calibration, proper lubrication, coolant management, and routine inspection of both spindles and turrets.