USED DOOSAN PUMA 2600Y – 2019

The DOOSAN PUMA 2600Y – 2019 is a CNC turning center designed for precision turning, milling, drilling, tapping, and complex multi-axis machining. The Y-axis configuration adds off-center machining capability, allowing the machine to perform milling and drilling operations that would otherwise require a separate machining center. This makes the PUMA 2600Y particularly useful for production shops manufacturing complex components in a single setup.

The PUMA 2600Y features a 10-inch chuck, approximately 3.0-inch bar capacity, and a maximum turning diameter of approximately 16.5 inches. The machine provides approximately 10.6 inches of X-axis travel, 20.1 inches of Z-axis travel, and ±2 inches of Y-axis travel, with a 12-station BMT55 turret and live tooling capability.

The spindle is typically configured with a 4,000 RPM, 30 HP main spindle, providing the power required for both general turning and heavier production work. The machine’s Y-axis, C-axis, live tooling, and optional parts-handling equipment make it well suited for complete machining of shafts, housings, flanges, fittings, and other complex components.

---

DOOSAN PUMA 2600Y – 2019 – AXIS

Specification	Details
Machine Type	CNC Turning Center
Axis Configuration	X / Y / Z / C
X-Axis Travel	Approx. 10.6″ / 270 mm
Y-Axis Travel	Approx. ±2″ / ±50 mm
Z-Axis Travel	Approx. 20.1″ / 510 mm
C-Axis	Standard
Y-Axis	Standard
Live Tooling	Standard
Milling Capability	Standard
Rigid Tapping	Available
Interpolation	X / Y / Z / C

---

DOOSAN PUMA 2600Y – 2019 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
X-Axis Travel	Approx. 10.6″ / 270 mm
Y-Axis Travel	Approx. ±2″ / ±50 mm
Z-Axis Travel	Approx. 20.1″ / 510 mm
Maximum Turning Diameter	Approx. 16.5″ / 420 mm
Maximum Turning Length	Approx. 19.7″ / 500 mm
Bar Capacity	Approx. 3.0″ / 76 mm
Spindle Bore	Configuration Dependent
Chuck Size	10″

The Y-axis provides approximately 4 inches of total Y-axis movement, allowing the live tooling to perform off-center milling, drilling, and tapping operations.

---

DOOSAN PUMA 2600Y – 2019 – CAPACITY / CHUCK

Specification	Details
Main Chuck Size	10″ / 254 mm
Maximum Turning Diameter	Approx. 16.5″ / 420 mm
Maximum Turning Length	Approx. 19.7″ / 500 mm
Maximum Bar Capacity	Approx. 3.0″ / 76 mm
Spindle Bore	Configuration Dependent
Workholding	Hydraulic Chuck
Collet Capability	Available
C-Axis	Standard
Y-Axis Machining	Standard

The 10-inch hydraulic chuck provides a useful combination of workholding capacity and spindle clearance for medium-sized production components.

---

DOOSAN PUMA 2600Y – 2019 – SPINDLE

Specification	Details
Spindle Type	CNC Turning Spindle
Maximum Spindle Speed	4,000 RPM
Spindle Motor	30 HP / Approx. 22 kW
Spindle Nose	A2-8
Maximum Torque	Approx. 520 ft-lb
C-Axis	Standard
Spindle Orientation	Standard
Bar Capacity	Approx. 3.0″
Through-Spindle Coolant	Available
Rigid Tapping	Available

The 30 HP spindle provides sufficient power for production turning as well as heavier roughing operations. The C-axis allows the spindle to function as a positioning axis for live-tool operations.

---

DOOSAN PUMA 2600Y – 2019 – LIVE TOOLING / MILLING

Specification	Details
Live Tooling	Standard
Y-Axis	Standard
C-Axis	Standard
Live Tool Speed	Configuration Dependent
Milling	Standard
Drilling	Standard
Tapping	Standard
Radial Tooling	Available
Axial Tooling	Available
Off-Center Machining	Standard

The Y-axis configuration makes the PUMA 2600Y significantly more capable than a standard 2-axis PUMA 2600. It can perform off-center milling, cross-drilling, tapping, slotting, and other secondary operations without transferring the workpiece to another machine.

---

DOOSAN PUMA 2600Y – 2019 – TOOL TURRET

Specification	Details
Turret Type	BMT55 Live-Tool Turret
Tool Stations	12
Live Tool Stations	Configuration Dependent
Tool Interface	BMT55
Automatic Indexing	Standard
Turret Indexing	High Speed
Turning Tools	Supported
Milling Tools	Supported
Toolholders	BMT55
Automatic Tool Change	Turret Indexing

The 12-station BMT55 turret provides space for turning and live-tool holders, allowing multiple machining operations to be programmed without manual tool changes.

---

DOOSAN PUMA 2600Y – 2019 – CONTROL SYSTEM

Specification	Details
CNC Control	FANUC 0i-TF
Control Manufacturer	FANUC
Display	Color LCD
Programming	G-Code
Conversational Programming	Available
Tool Offset Management	Standard
Work Offset Management	Standard
C-Axis Programming	Standard
Y-Axis Programming	Standard
Live Tool Programming	Standard
Ethernet	Available
USB	Available
Diagnostics	Standard

The FANUC control provides established CNC programming functionality for turning, Y-axis milling, C-axis interpolation, live tooling, and production machining.

---

DOOSAN PUMA 2600Y – 2019 – FEEDRATES

Specification	Details
X-Axis Rapid Traverse	Approx. 787 IPM
Y-Axis Rapid Traverse	Approx. 394 IPM
Z-Axis Rapid Traverse	Approx. 945 IPM
Maximum Cutting Feedrate	Configuration Dependent
Feedrate Override	Standard
Linear Interpolation	Yes
Circular Interpolation	Yes
C-Axis Interpolation	Yes
Y-Axis Interpolation	Yes

The rapid traverse rates are designed to reduce non-cutting time during production cycles, particularly on components requiring multiple turning and live-tool operations.

---

DOOSAN PUMA 2600Y – 2019 – COOLANT & CHIP MANAGEMENT

Specification	Details
Flood Coolant	Standard
Coolant Pump	Standard
Coolant Tank	Standard
Coolant Capacity	Approx. 53 gal
High-Pressure Coolant	Optional
Through-Tool Coolant	Available
Chip Conveyor	Optional / Configuration Dependent
Chip Management	Automated
Coolant Filtration	Configuration Dependent
Mist Collector	Optional
Oil Skimmer	Optional

The PUMA 2600Y can be equipped with a chip conveyor and high-pressure coolant system for high-volume production applications.

---

DOOSAN PUMA 2600Y – 2019 – AUTOMATION / PROBING

Specification	Details
Automatic Turret Indexing	Standard
Work Probe	Optional
Tool Probe	Optional
Tool Measurement	Available
Parts Catcher	Optional
Bar Feeder Compatibility	Available
Bar Puller	Available
Automatic Part Transfer	Available
Robotic Loading	Available
Production Automation	Available

Bar feeders, parts catchers, probing, and robotic loading can transform the PUMA 2600Y into a highly productive automated turning cell.

---

DOOSAN PUMA 2600Y – 2019 – POWER REQUIREMENTS

Specification	Details
Main Spindle Motor	30 HP
Electrical Service	Three-Phase
Input Voltage	Configuration Dependent
Shop Air	Required
Hydraulic System	Standard
Electrical Cabinet	FANUC / Doosan
Power Requirements	Machine Specific
Installation	Industrial

Electrical requirements should be verified against the individual machine’s documentation and installed accessories.

---

DOOSAN PUMA 2600Y – 2019 – DIMENSIONS

Specification	Details
Machine Type	Enclosed CNC Turning Center
Approximate Machine Width	126″
Approximate Machine Depth	72″
Approximate Machine Height	76″
Machine Weight	Approx. 13,000–14,000 lbs
Floor Space	Medium/Large
Installation	Industrial
Rigging	Required
Chip Conveyor	Adds Overall Length

Exact dimensions and shipping weight vary depending on chip conveyor, bar feeder, parts catcher, high-pressure coolant, and other installed options.

---

DOOSAN PUMA 2600Y – 2019 – GENERAL INFORMATION

Specification	Details
Manufacturer	Doosan
Model	PUMA 2600Y
Year	2019
Machine Category	CNC Turning Center
Machine Type	Y-Axis CNC Lathe
Axis Configuration	X / Y / Z / C
Maximum Turning Diameter	Approx. 16.5″
Maximum Turning Length	Approx. 19.7″
X-Axis Travel	Approx. 10.6″
Y-Axis Travel	Approx. ±2″
Z-Axis Travel	Approx. 20.1″
Bar Capacity	Approx. 3.0″
Chuck Size	10″
Main Spindle Speed	4,000 RPM
Main Spindle Power	30 HP
Spindle Nose	A2-8
Live Tooling	Yes
Turret	12-Station BMT55
CNC Control	FANUC 0i-TF
Chip Conveyor	Configuration Dependent
Bar Feeder	Optional
Parts Catcher	Optional

---

INDUSTRIES THAT USE DOOSAN PUMA 2600Y

The DOOSAN PUMA 2600Y is suitable for:

• Aerospace
• Automotive
• Medical
• Defense
• Oil and gas
• Energy
• Hydraulic and pneumatic
• General machine shops
• Contract manufacturing
• Precision engineering
• Industrial machinery
• Job shops
• Production machining

---

TYPICAL PARTS DOOSAN PUMA 2600Y CAN PRODUCE

The PUMA 2600Y can produce:

• Shafts
• Flanges
• Bushings
• Housings
• Couplings
• Valves
• Hydraulic components
• Pneumatic components
• Automotive components
• Aerospace components
• Medical components
• Pump components
• Precision fittings
• Complex mill-turn components

Typical operations include OD and ID turning, facing, grooving, threading, drilling, boring, tapping, milling, cross-hole drilling, slotting, contouring, and off-center machining.

---

WHY CHOOSE DOOSAN PUMA 2600Y

The main advantage of the DOOSAN PUMA 2600Y is its combination of a powerful turning spindle and Y-axis live-tool capability. Instead of transferring a component to a separate machining center for secondary operations, the PUMA 2600Y can perform many milling, drilling, and tapping operations directly on the lathe.

The 30 HP, 4,000 RPM spindle provides strong cutting capability for production turning, while the 10-inch chuck and approximately 3-inch bar capacity accommodate a broad range of medium-sized components.

The Y-axis is particularly valuable for off-center holes, slots, flats, pockets, cross-drilled features, and complex milled surfaces. When combined with C-axis positioning, the machine can produce intricate features with fewer setups.

The BMT55 live-tool turret also provides a rigid platform for milling and drilling, making the machine suitable for both low-volume job-shop work and higher-volume production.

---

WHY BUY USED DOOSAN PUMA 2600Y – 2019

A used 2019 DOOSAN PUMA 2600Y is an attractive option for shops that need mill-turn capability without purchasing a new CNC turning center.

The machine’s Y-axis and live tooling can eliminate secondary machining setups, reducing handling time and improving dimensional consistency between turned and milled features.

When purchasing a used machine, buyers should inspect the main spindle, live-tool drive, Y-axis, turret, ballscrews, linear guides, hydraulic system, coolant system, and CNC control.

Particular attention should be given to spindle runout, bearing noise, axis backlash, Y-axis positioning accuracy, C-axis accuracy, turret indexing, live-tool vibration, hydraulic pressure, coolant flow, and crash history.

The installed options can significantly affect the machine’s value. A PUMA 2600Y equipped with chip conveyor, bar feeder, parts catcher, high-pressure coolant, probing, and extensive BMT55 tooling can be much more attractive to a production buyer than a base machine.

---

HOW MUCH DOES A USED DOOSAN PUMA 2600Y – 2019 COST?

The price of a 2019 DOOSAN PUMA 2600Y depends on spindle hours, machine condition, tooling, control configuration, live-tool equipment, bar feeder, chip conveyor, parts catcher, and maintenance history.

For inventory valuation, I would use:

USED DOOSAN PUMA 2600Y – 2019 PRICE RANGE	ESTIMATED COST
High Hours / Basic Configuration	$65,000 – $75,000
Functional Used Machine	$75,000 – $85,000
Good Condition / Production Ready	$85,000 – $95,000
Excellent / Well Equipped	$95,000 – $110,000
Low Hours / Premium Configuration	$110,000 – $125,000+

For a 2019 DOOSAN PUMA 2600Y in good working condition, I would estimate approximately $80,000–$105,000 USD.

For your inventory listing, I would recommend a practical asking-price range of $90,000–$105,000 USD for a clean, operational machine with reasonable hours and desirable options.

A low-hour machine equipped with bar feeder, parts catcher, chip conveyor, high-pressure coolant, probing, and extensive live tooling could potentially command $105,000–$125,000+.

A higher-hour machine with limited options could fall closer to $65,000–$80,000.

Best estimated listing value: $90,000–$105,000 USD.