USED DN SOLUTIONS PUMA TL2000

The DN Solutions PUMA TL2000 is a high-productivity twin-turret CNC turning center designed for manufacturers seeking maximum throughput, reduced cycle times, and improved machining efficiency. Part of the highly successful PUMA TL Series, the TL2000 incorporates upper and lower turret technology that allows simultaneous machining operations on a single workpiece. This capability dramatically reduces production times while maintaining excellent accuracy and surface finish quality. The machine is specifically designed for shaft-type components, automotive parts, hydraulic cylinders, industrial rollers, crankshafts, camshafts, and other long turning applications where productivity is a critical factor.

Unlike traditional single-turret CNC lathes, the PUMA TL2000 utilizes a twin-turret configuration that enables parallel machining. Both turrets can work simultaneously, allowing roughing and finishing operations to occur at the same time. This significantly reduces cycle times and increases machine utilization. Manufacturers producing high volumes of repetitive components benefit greatly from this architecture because it enables more parts to be completed in less time while reducing labor costs.

The machine features an 8-inch chuck, a maximum turning diameter of approximately 370 mm, and a maximum turning length of 600 mm. Powered by a 22 kW spindle motor capable of reaching 5,000 RPM, the PUMA TL2000 offers an excellent balance of speed, power, and torque. Its rigid machine structure is specifically engineered to withstand simultaneous cutting forces generated by the dual-turret system, ensuring consistent accuracy during demanding production runs.

Manufacturers in automotive, oil and gas, aerospace, heavy equipment, transportation, and general machining industries frequently select the PUMA TL2000 because it provides outstanding productivity while maintaining the reliability for which DN Solutions machines are known. The machine’s robust construction, Fanuc-based control system, and efficient twin-turret architecture make it particularly attractive for medium-to-high volume production environments.

In the used CNC machine market, the DN Solutions PUMA TL2000 remains highly desirable because it offers advanced multi-turret machining technology at a fraction of the cost of new equipment. Companies looking to increase output, reduce cycle times, and improve profitability often view the PUMA TL2000 as an excellent long-term investment.

---

DN SOLUTIONS PUMA TL2000 – AXIS

Specification	Details
X-Axis Travel	10 in (250 mm)
Z-Axis Travel	26 in (650 mm)
Axis Configuration	Twin Turret CNC Turning Center
X-Axis Rapid Traverse	787 IPM (20 m/min)
Z-Axis Rapid Traverse	945 IPM (24 m/min)
Simultaneous Machining	Yes

Specifications based on manufacturer published data.

---

DN SOLUTIONS PUMA TL2000 – AXIS TRAVELS / WORK ENVELOPE

Specification	Details
Maximum Turning Diameter	14.6 in (370 mm)
Maximum Turning Length	24 in (600 mm)
Swing Capacity	Approx. 20 in
X-Axis Travel	10 in
Z-Axis Travel	26 in
Work Envelope	Twin-Turret Shaft Machining

---

DN SOLUTIONS PUMA TL2000 – CAPACITY / TABLE

Specification	Details
Chuck Size	8 in
Maximum Turning Diameter	14.6 in
Maximum Turning Length	24 in
Bar Capacity	Approx. 2.5 in (65 mm)
Workholding Type	Hydraulic Chuck
Production Capability	High Volume

Capacity based on published machine specifications.

---

DN SOLUTIONS PUMA TL2000 – SPINDLE

Specification	Details
Maximum Spindle Speed	5,000 RPM
Spindle Motor Power	29 HP (22 kW)
Maximum Torque	352 ft-lb (477 Nm)
Spindle Type	Heavy Duty Production Spindle
Spindle Nose	A2-6
C-Axis Capability	Optional

Spindle specifications from DN Solutions published data.

---

DN SOLUTIONS PUMA TL2000 – TOOL CHANGER

Specification	Details
Upper Turret Stations	12
Lower Turret Stations	8
Total Tool Positions	20
Turret Type	Servo Indexed
Simultaneous Cutting	Yes
Production Efficiency	Very High

Twin-turret configuration designed for parallel machining operations.

---

DN SOLUTIONS PUMA TL2000 – CONTROL SYSTEM

Specification	Details
CNC Control	Fanuc Series
Multi-Turret Programming	Yes
USB Interface	Yes
Ethernet Connectivity	Available
Program Storage	Expanded Memory
Networking Capability	Yes

---

DN SOLUTIONS PUMA TL2000 – COOLANT / DUST / WATER MANAGEMENT

Specification	Details
Coolant System	Flood Coolant
Coolant Tank	Large Capacity
Chip Conveyor	Available
Filtration System	Standard
Coolant Pump	Industrial Duty
Automatic Chip Removal	Yes

---

DN SOLUTIONS PUMA TL2000 – POWER REQUIREMENTS

Specification	Details
Electrical Supply	220V / 440V
Connected Load	Approx. 35 kVA
Air Requirement	Shop Air Required
Hydraulic System	Integrated
Main Disconnect	Industrial Grade

---

DN SOLUTIONS PUMA TL2000 – DIMENSIONS

Specification	Details
Machine Length	128 in (3250 mm)
Machine Width	83 in (2118 mm)
Machine Height	76 in (1930 mm)
Machine Weight	15,873 lbs (7200 kg)
Floor Space Required	Moderate

Dimensions from manufacturer specifications.

---

DN SOLUTIONS PUMA TL2000 – GENERAL INFORMATION

Specification	Details
Manufacturer	DN Solutions
Model	PUMA TL2000
Machine Type	Twin Turret CNC Turning Center
Condition	Used
Country of Origin	South Korea
Application	Shaft & Production Turning
Construction	Heavy Duty Cast Iron

---

WHY BUY USED DN SOLUTIONS PUMA TL2000

Purchasing a used DN Solutions PUMA TL2000 allows manufacturers to obtain advanced twin-turret turning technology without the substantial capital expenditure associated with new machinery. The machine’s primary advantage is its ability to dramatically reduce cycle times through simultaneous machining operations. By utilizing both upper and lower turrets at the same time, manufacturers can perform multiple operations concurrently, resulting in significantly higher production output compared to conventional CNC lathes.

For shops producing shaft-type components, hydraulic cylinders, automotive parts, and industrial components, the productivity gains can be substantial. Roughing operations can be performed by one turret while finishing operations are completed by the second turret. This parallel processing capability minimizes idle time and maximizes spindle utilization, leading directly to improved profitability.

The PUMA TL2000 is also recognized for its robust machine construction. The heavy-duty cast iron base and rigid spindle design allow the machine to maintain excellent accuracy even under demanding cutting conditions. This durability contributes to the machine’s strong reputation in production environments where reliability is essential.

Another major advantage is the widespread availability of service and support. The Fanuc control platform remains one of the most commonly used CNC systems worldwide, making programming, maintenance, and operator training relatively straightforward. Replacement parts and technical support remain readily available for most machine configurations.

Used PUMA TL2000 machines often provide outstanding value because they deliver productivity levels comparable to much newer equipment. Many manufacturers can increase production capacity significantly while spending only a fraction of the cost required for a new twin-turret turning center. This combination of productivity, reliability, and affordability continues to make the PUMA TL2000 one of the most attractive options in the used CNC machinery market.

---

HOW MUCH DOES A USED DN SOLUTIONS PUMA TL2000 COST?

The price of a used DN Solutions PUMA TL2000 varies depending on machine age, operating hours, maintenance history, tooling packages, installed options, and overall condition. Because the machine features twin-turret technology and high-productivity capabilities, it generally commands stronger resale values than traditional single-turret CNC lathes.

Most used PUMA TL2000 machines typically sell within a range of approximately $50,000 to $180,000. Older machines with higher spindle hours and standard configurations generally occupy the lower end of the pricing range, while newer machines with low operating hours, advanced tooling packages, chip conveyors, and automation options often command premium prices.

Machine condition plays a major role in determining market value. Buyers typically evaluate spindle performance, turret indexing accuracy, machine geometry, lubrication systems, hydraulic systems, and maintenance records. Machines with documented service histories generally sell at higher prices because they present lower operational risk.

Additional accessories can significantly increase value. Features such as bar feeders, automatic part catchers, live tooling systems, chip conveyors, high-pressure coolant systems, and extensive tooling packages often add considerable value to the machine package. Purchasing a machine already equipped with these options can reduce implementation costs and shorten production startup times.

Demand within automotive, transportation, oil and gas, and industrial manufacturing sectors also affects resale pricing. Because the PUMA TL2000 is optimized for high-volume production environments, demand remains consistently strong among manufacturers seeking improved throughput and reduced cycle times.

Even after accounting for transportation, rigging, and installation expenses, purchasing a used PUMA TL2000 remains a highly cost-effective alternative to acquiring a new twin-turret turning center. Manufacturers often realize substantial savings while gaining access to advanced production technology capable of delivering exceptional long-term productivity.

---

INDUSTRIES THAT USE DN SOLUTIONS PUMA TL2000

• Automotive Manufacturing
• Aerospace Manufacturing
• Transportation Equipment Manufacturing
• Oil & Gas Industry
• Hydraulic Component Manufacturing
• Heavy Equipment Manufacturing
• Agricultural Equipment Manufacturing
• Energy Industry
• Defense Manufacturing
• Industrial Machinery Manufacturing
• General Contract Machining
• Precision Component Manufacturing

---

TYPICAL PARTS DN SOLUTIONS PUMA TL2000 CAN PRODUCE

• Camshafts
• Crankshafts
• Drive Shafts
• Hydraulic Cylinders
• Rollers
• Pump Shafts
• Valve Bodies
• Bearing Housings
• Automotive Components
• Aerospace Components
• Industrial Spindles
• Couplings
• Precision Shafts
• Power Transmission Components
• Production Turned Parts

---

WHY CHOOSE DN SOLUTIONS PUMA TL2000

The DN Solutions PUMA TL2000 is an outstanding choice for manufacturers seeking maximum turning productivity through simultaneous machining operations. With its twin-turret configuration, 8-inch chuck, 5,000 RPM spindle, 29 HP motor, and rigid machine structure, the TL2000 delivers exceptional performance for high-volume production applications. The machine’s ability to perform parallel machining operations significantly reduces cycle times while maintaining excellent part quality and consistency.

For manufacturers producing shafts, automotive components, hydraulic parts, and industrial machinery components, the PUMA TL2000 offers a compelling combination of productivity, reliability, and value. Its proven design, robust construction, and strong reputation in production environments continue to make it one of the most sought-after used twin-turret CNC turning centers available today.