USED DMG MORI DMP 70

The DMG MORI DMP 70 is a high-speed, compact vertical machining center designed for precision machining and high-volume production in industries such as medical technology, aerospace, electronics, and precision engineering. It is part of the DMP series, which focuses on combining extreme dynamics, high accuracy, and automation-ready design in a very small footprint. The machine offers axis travels of approximately 700 mm (X), 420 mm (Y), and 380 mm (Z), making it suitable for small to medium-sized precision components requiring tight tolerances and excellent surface quality.

A key highlight of the DMP 70 is its extremely compact footprint of only around 4.2 m², allowing it to be installed in space-constrained production environments while still offering a relatively large work envelope. Despite its size, it delivers very high dynamics with rapid traverse speeds up to 60 m/min and acceleration up to 2 g, which significantly reduces non-cutting time and increases productivity in mass production environments.

The machine is equipped with high-performance spindle options, typically including a 10,000 rpm inline spindle as standard and an optional 24,000 rpm spindle for high-speed finishing applications. This flexibility makes it suitable for both aluminum components and precision machining of harder materials. It also features direct scale feedback systems and advanced cooling strategies to ensure thermal stability and long-term accuracy.

From a productivity perspective, the DMP 70 is built for automation-driven manufacturing. It supports pallet systems such as WH cells and other automation solutions, enabling unattended production and high utilization rates. Tool change times are extremely fast, with chip-to-chip times around 1.5 seconds, which directly improves cycle efficiency.

Overall, the DMG MORI DMP 70 is a high-speed production machining center designed for manufacturers who prioritize cycle time reduction, compact automation integration, and consistent precision in small-part manufacturing.

DMG MORI DMP 70 SPECIFICATIONS

WHY BUY USED DMG MORI DMP 70

Buying a used DMG MORI DMP 70 is a strong option for manufacturers focused on high-volume, small-part production where cycle time and automation efficiency matter more than heavy material removal. One of the biggest advantages is depreciation. Since the DMP 70 is built for production environments, its value reduces significantly after a few years of use, allowing buyers to access high-end automation-ready machining technology at a much lower cost.

Another key advantage is cutting time efficiency relative to investment. The DMP 70 is designed for extremely fast machining cycles, with high acceleration, rapid traverse rates, and very short chip-to-chip times. Even used machines retain excellent dynamic performance if properly maintained, which makes them highly effective for continuous production. This directly translates into lower cost per part and higher throughput.

Durability is also a strong factor. The machine is built for continuous operation in production environments rather than heavy-duty cutting. Its compact rigid structure and thermal stability systems help maintain accuracy over long production runs. Machines with moderate cutting time (typically under 15,000–25,000 spindle hours) usually still perform very reliably. Even higher-hour machines can remain productive, but spindle condition and automation components should be carefully evaluated.

Another major benefit is automation readiness. Many used DMP 70 machines come equipped with pallet changers, chip conveyors, and integration options for robotic or WH cell systems, which makes them immediately usable in automated production lines.

Cutting time (spindle hours) is more important than manufacturing year when evaluating value. A lower-hour older machine can outperform a newer high-hour machine in real production stability. For manufacturers focused on ROI, automation, and fast cycle production, a used DMP 70 offers excellent efficiency in a compact and highly productive package.

HOW MUCH DOES A USED DMG MORI DMP 70 COST?

The cost of a used DMG MORI DMP 70 depends on manufacturing year, machine condition, automation level, configuration, and most importantly, cutting time (spindle hours). Since the machine is designed for high-volume production, spindle usage is a more accurate indicator of wear than age alone.

For older machines (early generation or heavily used units), prices typically range from $15,000 to $35,000. These machines often have high spindle hours and older control systems, making them suitable for basic production tasks or secondary machining rather than high-efficiency automation environments.

For machines from the 2000–2015 period, prices generally range from $35,000 to $80,000 depending on condition and automation setup. Units with moderate cutting time (around 20,000–35,000 spindle hours) are considered good value and are still widely used in small-part production environments.

For newer machines from 2015–2025, used DMP 70 units typically range from $80,000 to $150,000 or more depending on configuration. Machines with low cutting hours (under 10,000–15,000 hours), full automation packages such as WH cells, and high-speed spindle options command the highest prices. Integrated automation significantly increases value due to production efficiency benefits.

Cutting time is a critical pricing factor because the DMP 70 is primarily used in continuous production environments. A machine with low spindle hours but older manufacturing year may be more valuable than a newer machine with heavy usage. Buyers should therefore focus on machine condition, service history, and actual production performance rather than just manufacturing year to ensure a cost-effective investment.