USED OKUMA GI-20N
The OKUMA GI-20N is a CNC internal grinding machine designed for high-precision ID grinding of bearings, bushings, sleeves, gears, hydraulic components, and other cylindrical components requiring accurate internal bores and fine surface finishes. The GI-20N is capable of grinding bores from approximately 0.20 to 11.81 inches (5 to 300 mm) and provides a maximum grinding depth of approximately 7.87 inches (200 mm). Its compact but rigid construction makes it suitable for precision grinding operations where dimensional accuracy, repeatability, and controlled material removal are important.
The machine is designed around simultaneous X- and Z-axis CNC control, allowing automatic positioning and grinding cycles rather than relying entirely on manual grinding operations. The workhead provides a spindle speed range of approximately 100–750 RPM, while the grinding spindle configuration can vary depending on the machine and installed grinding head. Documented GI-20N machines have been equipped with internal grinding spindles capable of approximately 6,300–13,000 RPM, along with a 7.5 HP wheel-spindle drive motor.
The GI-20N also provides a useful work envelope for an internal grinder of its generation. The documented machine has approximately 15.75 inches of swing inside the chuck guard, a work capacity of approximately 330 lb × 7.87 inches, and X-axis workhead travel of approximately 1.97–5.91 inches. The wheel head provides approximately 13.78 inches of left-to-right travel. Depending on configuration, the machine can be equipped with a three-jaw chuck, faceplate, internal grinding spindle, diamond dresser, coolant system, and magnetic separator.
The OKUMA GI-20N is suitable for precision grinding applications across automotive, bearing, hydraulic, aerospace, industrial machinery, tooling, and general manufacturing industries. Its wide bore range allows one machine to handle both relatively small internal diameters and much larger bores. A properly maintained used GI-20N can be an economical way for a manufacturer or grinding shop to add CNC internal grinding capability without the capital investment associated with a newer CNC grinder.
OKUMA GI-20N – AXIS
| Specification | Value |
|---|---|
| X Axis | 1.97–5.91″ (50–150 mm) Approx. |
| Z Axis | 19.69″ (500 mm) Approx. |
| X-Axis Function | Workhead Cross Slide |
| Z-Axis Function | Table Travel |
| Machine Configuration | CNC Internal Grinder |
| CNC Control | OSP Series |
| Simultaneous Control | X + Z Axis |
| Workhead Swivel | Approximately 10° |
| Wheelhead Swivel | Approximately 5° |
The GI-20N uses two-axis CNC control for coordinated grinding operations. The workhead can swivel approximately 10 degrees, while the wheelhead provides approximately 5 degrees of swivel for setup flexibility.
OKUMA GI-20N – AXIS TRAVELS / WORK ENVELOPE
| Specification | Value |
|---|---|
| X-Axis Travel | Approximately 1.97–5.91″ |
| Z-Axis Travel | Approximately 19.69″ |
| Maximum Swing Inside Chuck Guard | 15.75″ (400 mm) |
| Maximum Grinding Bore | 11.81″ (300 mm) |
| Minimum Grinding Bore | 0.20″ (5 mm) |
| Maximum Grinding Depth | 7.87″ (200 mm) |
| Maximum Work Length | Approximately 7.87″ |
| Work Capacity | Approximately 330 lb × 7.87″ |
| X Positioning Rate | Approximately 472 IPM |
| Z Positioning Rate | Approximately 472 IPM |
The GI-20N provides a wide internal-grinding bore range relative to its machine size. The approximately 5–300 mm bore capability makes it suitable for a wide range of precision ID-grinding applications.
OKUMA GI-20N – CAPACITY
| Specification | Value |
|---|---|
| Machine Type | CNC Internal Grinding Machine |
| Grinding Type | Internal Diameter Grinding |
| Bore Range | 0.20–11.81″ (5–300 mm) |
| Maximum Grinding Depth | 7.87″ (200 mm) |
| Maximum Swing | 15.75″ (400 mm) |
| Maximum Work Length | Approximately 7.87″ |
| Work Capacity | Approximately 330 lb × 7.87″ |
| Workhead | CNC |
| Wheelhead | CNC |
| X/Z CNC Control | Yes |
| Workhead Swivel | 10° Approx. |
| Wheelhead Swivel | 5° Approx. |
The broad bore range allows the GI-20N to grind components ranging from small precision bores to large internal diameters approaching 12 inches.
OKUMA GI-20N – WORKHEAD SPINDLE
| Specification | Value |
|---|---|
| Workhead Spindle Speed | 100–750 RPM |
| Speed Control | Infinitely Variable |
| Workhead Spindle Bore | Approximately 2.76″ (70 mm) |
| Spindle Nose Diameter | Approximately 3.94″ |
| Workhead Swivel | Approximately 10° |
| Workholding | Chuck / Faceplate Configuration Dependent |
| CNC Control | Yes |
The workhead provides infinitely variable speed control over approximately 100–750 RPM on documented GI-20N configurations. Workholding can vary depending on the individual machine, with three-jaw chucks and faceplate arrangements documented.
OKUMA GI-20N – GRINDING SPINDLE
| Specification | Value |
|---|---|
| Grinding Spindle Type | Internal Grinding |
| Wheel Spindle Motor | Approximately 7.5 HP (5.5 kW) |
| Grinding Spindle Speed | Configuration Dependent |
| Documented Grinding Head | BA65-13 |
| Documented Speed Range | Approximately 6,300–13,000 RPM |
| Grinding Wheel Diameter | Configuration Dependent |
| Grinding Wheel Width | Configuration Dependent |
| High-Frequency Spindle | Configuration Dependent |
| Belt-Driven Spindle | Configuration Dependent |
Grinding spindle specifications vary considerably with the grinding-head configuration. One documented GI-20N was equipped with a BA65-13 grinding head operating from approximately 6,300 to 13,000 RPM.
OKUMA GI-20N – CONTROL SYSTEM
| Specification | Value |
|---|---|
| CNC Control | OKUMA OSP |
| Documented Control | OSP-U10G / OSP-5020G |
| CNC Control Type | CNC Grinder Control |
| Axis Control | X + Z |
| Programming | CNC Grinding Programming |
| Graphics | Configuration Dependent |
| Automatic Grinding Cycles | Yes |
| Tool / Wheel Data | Configuration Dependent |
| Automatic Infeed | Yes |
GI-20N machines were produced over multiple years and therefore can be found with different generations of OKUMA OSP controls. Documented examples include OSP-U10G and OSP-5020G controls.
OKUMA GI-20N – DRESSER / WHEEL MANAGEMENT
| Specification | Value |
|---|---|
| Wheel Dresser | Configuration Dependent |
| Diamond Dresser | Equipped on Documented Machines |
| Dresser Type | Single-Point / Hydraulic Configuration Dependent |
| Automatic Dressing | Configuration Dependent |
| Wheel Compensation | CNC Controlled |
| Grinding Wheel Data | CNC Managed |
| Dressing Cycle | Configuration Dependent |
Documented GI-20N machines have been equipped with single-point diamond dressers and three-position diamond hydraulic dressers. The exact dressing system should be verified on the individual machine.
OKUMA GI-20N – COOLANT / CHIP MANAGEMENT
| Specification | Value |
|---|---|
| Coolant System | Equipped |
| Coolant Filtration | Configuration Dependent |
| Magnetic Separator | Equipped on Documented Machines |
| Coolant Tank | Configuration Dependent |
| Grinding Sludge Management | Yes |
| Coolant Pump | Configuration Dependent |
| Splash Guard | Equipped |
| Steel Way Covers | Equipped on Documented Machines |
Grinding operations require effective coolant and filtration because grinding swarf and abrasive particles must be separated from the coolant. Documented GI-20N machines include coolant systems and magnetic separators.
OKUMA GI-20N – POWER REQUIREMENTS
| Specification | Value |
|---|---|
| Electrical Supply | Three Phase |
| Voltage | Configuration / Location Dependent |
| Wheel Spindle Motor | Approximately 7.5 HP |
| Workhead Motor | Configuration Dependent |
| Coolant Pump | Configuration Dependent |
| Hydraulic System | Configuration Dependent |
| Transformer | Configuration Dependent |
| Connected Load | Machine Specific |
Electrical requirements depend on the exact GI-20N configuration, control, grinding spindle, coolant system, hydraulic equipment, and accessories. The machine electrical nameplate should be verified before installation.
OKUMA GI-20N – DIMENSIONS
| Specification | Value |
|---|---|
| Machine Width | Approximately 90–100″ |
| Machine Depth | Configuration Dependent |
| Machine Height | Configuration Dependent |
| Machine Weight | Approximately 9,240 lb |
| Machine Weight Metric | Approximately 4,191 kg |
| Floor Space | Industrial |
| Shipping | Professional Rigging Recommended |
A documented GI-20N weighs approximately 9,240 lb. Exact dimensions and shipping weight vary with the installed grinding head, coolant equipment, electrical equipment, chuck, dresser, and other accessories.
OKUMA GI-20N – GENERAL INFORMATION
| Specification | Value |
|---|---|
| Manufacturer | OKUMA |
| Model | GI-20N |
| Machine Type | CNC Internal Grinder |
| Grinding Type | ID Grinding |
| Bore Range | 0.20–11.81″ |
| Maximum Grinding Depth | 7.87″ |
| Maximum Swing | 15.75″ |
| Workhead Speed | 100–750 RPM |
| Wheel Spindle Motor | Approximately 7.5 HP |
| X-Axis Travel | Approximately 1.97–5.91″ |
| Z-Axis Travel | Approximately 19.69″ |
| CNC Control | OKUMA OSP |
| Simultaneous Control | X + Z |
| Workhead Swivel | Approximately 10° |
| Wheelhead Swivel | Approximately 5° |
| Coolant System | Yes |
| Magnetic Separator | Configuration Dependent |
| Dresser | Configuration Dependent |
The GI-20N is a precision CNC internal grinding platform from OKUMA’s earlier generation of CNC grinders. Exact control, grinding spindle, dresser, workholding, and coolant specifications vary by production year and machine configuration.
INDUSTRIES THAT USE OKUMA GI-20N
The OKUMA GI-20N is suitable for industries where accurate internal bores and high-quality cylindrical surfaces are required.
- Automotive manufacturing
- Bearing manufacturing
- Aerospace
- Hydraulic components
- Pneumatic components
- Industrial machinery
- Gear manufacturing
- Transmission components
- Pump manufacturing
- Valve manufacturing
- Tool and die
- Precision engineering
- General contract machining
- Heavy equipment
- Energy equipment
TYPICAL PARTS OKUMA GI-20N CAN PRODUCE
The GI-20N can produce precision internal features on a wide range of cylindrical components.
Typical parts include:
- Bearing races
- Bushings
- Sleeves
- Gear bores
- Transmission components
- Hydraulic valve bodies
- Pump components
- Spindle components
- Precision shafts
- Bearing housings
- Cylindrical tooling
- Machine-tool components
- Automotive transmission parts
- Aerospace components
- Precision rings
- Hydraulic cylinders
- Valve components
Its broad 5–300 mm grinding-bore range allows the machine to handle both relatively small precision bores and much larger industrial components.
WHY CHOOSE OKUMA GI-20N
The primary advantage of the OKUMA GI-20N is its ability to perform CNC-controlled internal grinding across a very broad bore range. With grinding capability from approximately 0.20 to 11.81 inches, the machine can handle many different component sizes without requiring a large floor footprint.
The two-axis CNC configuration provides automatic control of the grinding cycle, including workhead and table positioning. This can improve repeatability compared with conventional manual internal grinding equipment.
The machine also supports specialized grinding-head configurations, allowing manufacturers to select grinding spindles appropriate to the required bore diameter and grinding operation. Documented machines have been equipped with high-speed internal grinding heads and diamond dressing systems.
For shops that already have conventional turning and milling equipment but need dedicated CNC ID-grinding capability, a used GI-20N can be a practical addition to the manufacturing process.
WHY BUY USED OKUMA GI-20N
Buying a used OKUMA GI-20N can provide CNC internal grinding capability at a relatively low acquisition cost compared with purchasing a new CNC internal grinder.
The machine’s wide grinding-bore range is one of its strongest advantages. A single GI-20N can potentially handle numerous bearing, bushing, sleeve, hydraulic, automotive, and industrial components, provided the correct grinding spindle and workholding equipment are installed.
Used GI-20N machines should be evaluated carefully because many examples on the market are older machines. Buyers should inspect the grinding spindle, spindle bearings, workhead, X/Z axis accuracy, hydraulic system, coolant system, magnetic separator, dresser, CNC control, way condition, and electrical components.
The grinding spindle and associated tooling are particularly important. A machine with a healthy high-speed grinding spindle, good dressing system, functional coolant filtration, and complete workholding equipment can be significantly more valuable than a machine requiring spindle rebuilding or replacement grinding equipment.
HOW MUCH DOES A USED OKUMA GI-20N COST?
The used market for the OKUMA GI-20N is relatively small because the model is an older CNC internal grinder. Current used listings include machines from the mid-to-late 1990s, with sellers generally using Request for Quote rather than publishing a fixed asking price. MachineTools currently shows a 1996 GI-20N in the United States, while a documented 1997 machine has been sold previously.
A reasonable used-market estimate for an OKUMA GI-20N is approximately $10,000–$25,000, depending heavily on the year, CNC control, grinding spindle, hours, machine condition, workholding, dresser, coolant system, and included tooling.
A clean, running machine with a good grinding spindle, CNC control, diamond dresser, chuck or faceplate, coolant system, magnetic separator, and tooling can command a premium. Machines requiring spindle work, control repairs, hydraulic repairs, or major refurbishment may trade substantially below the upper end of the range.
For an individual GI-20N, the most important factors affecting value are grinding spindle condition, spindle RPM and type, machine accuracy, X/Z axis condition, workhead condition, CNC control, dresser system, coolant filtration, magnetic separator, workholding, tooling, and maintenance history.
